Front page | perl.perl6.users |
Postings from June 2020
Re: perl6 with Rakudobrew
Thread Previous
|
Thread Next
From:
Vadim Belman
Date:
June 13, 2020 20:01
Subject:
Re: perl6 with Rakudobrew
Message ID:
19B4E111-D781-40DB-AC73-E75C66B111D9@lflat.org
Did you ever tried to follow the steps of you script manually? I guess on a clean system without pre-installed rakudo you'd get the same result. Because `build` only builds a release. When it's ready one needs to `switch` to the built. So, no, these two are different.
Best regards,
Vadim Belman
> On Jun 13, 2020, at 4:57 AM, Richard Hainsworth <rnhainsworth@gmail.com> wrote:
>
> Is the appveyor stanza (see the rakudobrew script below)
>
> - rakudobrew build moar %TEST_MOAR%
> the same as what you are suggesting?
>
> Richard
> On 13/06/2020 02:53, Vadim Belman wrote:
>>
>> Not really sure about it, but don't you have to do 'rakudobrew switch moar-%TEST_MOAR%' after building? rakudobrew doesn't immediately activates a build.
>>
>> Best regards,
>> Vadim Belman
>>
>>> On Jun 12, 2020, at 4:03 PM, Richard Hainsworth <rnhainsworth@gmail.com <mailto:rnhainsworth@gmail.com>> wrote:
>>>
>>> I have tried two different strategies on appveyor. (I also run a travis test for the same Module that passes without a problem).
>>>
>>> a) Copying from OpenSSL, which uses rakudo.git (see script below)
>>>
>>> b) Copying from GTK::Simple, which uses Rakudobrew (see below)
>>>
>>> Both failed for reasons I can't work out. (The final lines are below)
>>>
>>>
>>> Could someone suggest an install stanza that would use the latest `rakudo-star-***.msi` installation package?
>>>
>>> It would be good to have some samples in the raku documentation.
>>>
>>> I can provide my travis script (I use JJ's docker image).
>>>
>>> [Rakudobrew]
>>>
>>> os: Visual Studio 2017
>>>
>>> platform: x64
>>>
>>> install:
>>> - '"C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars64.bat"'
>>> - appveyor-retry choco install strawberryperl --allow-empty-checksums
>>> - SET PATH=C:\strawberry\c\bin;C:\strawberry\perl\site\bin;C:\strawberry\perl\bin;%PATH%
>>> - git clone https://github.com/tadzik/rakudobrew <https://github.com/tadzik/rakudobrew> %USERPROFILE%\rakudobrew
>>> - SET PATH=%USERPROFILE%\rakudobrew\bin;%PATH%
>>> - rakudobrew build moar %TEST_MOAR%
>>> - rakudobrew build zef
>>> - cd %APPVEYOR_BUILD_FOLDER%
>>> - echo "installing SSL so we can download the dll files"
>>> - zef install IO::Socket::SSL
>>> - zef --depsonly install .
>>> - zef build .
>>>
>>> build: off
>>>
>>> test_script:
>>> - prove -v -e "raku -Ilib" t/
>>> - zef --debug install .
>>>
>>> shallow_clone: true
>>> [ response from appveyor fail - last lines]
>>> ...
>>> Generating code
>>> Finished generating code
>>> Microsoft (R) Program Maintenance Utility Version 14.16.27035.0
>>> Copyright (C) Microsoft Corporation. All rights reserved.
>>> +++ Checking for moar NQP version
>>> +++ Creating installation directories
>>> +++ Removing old files
>>> +++ Installing files
>>> +++ Preparing installation
>>> Installed 13 core modules in 24.63815875 seconds!
>>> +++ MOAR BACKEND INSTALLED
>>> +++ Installing MOAR launchers
>>> +++ Creating Raku executable alias
>>> +++ Rakudo installed succesfully!
>>> Rakudo has been built and installed.
>>> Updating shims
>>> Done, moar-2020.05.1 built
>>> rakudobrew build zef
>>> Cloning into 'zef'...
>>> Your branch is up to date with 'origin/master'.
>>> rakudobrew: perl6: command not found
>>> Command exited with code 1
>>>
>>> [Rakudo.git]
>>> os: Visual Studio 2017
>>>
>>> platform: x64
>>>
>>> install:
>>> - '"C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars64.bat"'
>>> - appveyor-retry choco install strawberryperl --allow-empty-checksums
>>> - SET PATH=C:\strawberry\c\bin;C:\strawberry\perl\site\bin;C:\strawberry\perl\bin;%PATH%
>>> - appveyor-retry git clone https://github.com/rakudo/rakudo.git <https://github.com/rakudo/rakudo.git> %APPVEYOR_BUILD_FOLDER%\..\rakudo
>>> - cd %APPVEYOR_BUILD_FOLDER%\..\rakudo
>>> - perl Configure.pl --gen-moar --gen-nqp --backends=moar
>>> - nmake install
>>> - SET PATH=%APPVEYOR_BUILD_FOLDER%\..\rakudo\install\bin;%PATH%
>>> - SET PATH=%APPVEYOR_BUILD_FOLDER%\..\rakudo\install\share\perl6\site\bin;%PATH%
>>> - cd %APPVEYOR_BUILD_FOLDER%
>>> - echo "installing SSL so we can download the dll files"
>>> - zef install IO::Socket::SSL
>>> - zef --depsonly install .
>>> - zef build .
>>>
>>> build: off
>>>
>>> test_script:
>>> - prove -v -e "raku -Ilib" t/
>>> - zef --debug install .
>>>
>>> shallow_clone: true
>>> [rakudo.git - avveyor failure. last lines]
>>> <snip>
>>> +++ MOAR BACKEND INSTALLED
>>> +++ Installing MOAR launchers
>>> +++ Creating Raku executable alias
>>> +++ Rakudo installed succesfully!
>>> SET PATH=%APPVEYOR_BUILD_FOLDER%\..\rakudo\install\bin;%PATH%
>>> SET PATH=%APPVEYOR_BUILD_FOLDER%\..\rakudo\install\share\perl6\site\bin;%PATH%
>>> cd %APPVEYOR_BUILD_FOLDER%
>>> echo "installing SSL so we can download the dll files"
>>> "installing SSL so we can download the dll files"
>>> zef install IO::Socket::SSL
>>> 'zef' is not recognized as an internal or external command,
>>> operable program or batch file.
>>> Command exited with code 1
>>> [end]
>>>
>>> On 12/06/2020 20:15, Vadim Belman wrote:
>>>> I'm still using rakudobrew for myself, it is not a problem. Besides, we still install perl6.
>>>>
>>>> What I'd look for is if correct PATH is setup; and check if rakudobrew is been used properly. Note that different modes (env or shim) would need different handling. To my understanding, in a container shims are preferable over env.
>>>>
>>>> Best regards,
>>>> Vadim Belman
>>>>
>>>>> On Jun 12, 2020, at 2:40 PM, Elizabeth Mattijsen <liz@dijkmat.nl> <mailto:liz@dijkmat.nl> wrote:
>>>>>
>>>>> It is my understanding that rakudobrew has been renamed to rakubrew: https://rakubrew.org <https://rakubrew.org/> Could the be the issue?
>>>>>
>>>>>> On 12 Jun 2020, at 14:59, Richard Hainsworth <rnhainsworth@gmail.com> <mailto:rnhainsworth@gmail.com> wrote:
>>>>>>
>>>>>> I ran into this error using Rakudobrew on appveyor (see after <snip>)
>>>>>>
>>>>>> I'm new at using appveyor, so maybe my script is wrong. But I wonder whether its because of a name change to raku without a backward alias to perl6.
>>>>>>
>>>>>> <snip>
>>>>>>
>>>>>> Rakudo has been built and installed.
>>>>>>
>>>>>> Updating shims
>>>>>> Done, moar-2020.05.1 built
>>>>>> rakudobrew build zef
>>>>>> Cloning into 'zef'...
>>>>>> Your branch is up to date with 'origin/master'.
>>>>>> rakudobrew: perl6: command not found
>>>>>> Command exited with code 1
>>
Thread Previous
|
Thread Next