develooper Front page | perl.perl5.porters | Postings from September 2014

Build failed in Jenkins: perl5-threaded #4580

Thread Next
From:
dennis+p5p-jenkins
Date:
September 29, 2014 17:27
Subject:
Build failed in Jenkins: perl5-threaded #4580
Message ID:
1087609083.75.1412011662796.JavaMail.jenkins@jenkins-001.ams6.corp.booking.com
See <http://perl5.git.perl.org:8080/job/perl5-threaded/4580/changes>

Changes:

[khw] regexp.h: Move regex flag bit positions.

[khw] regexp.h Remove unused bit placeholders

[khw] regexp.h: Define flag bit directly, not indirectly

[khw] regexp.h: Make tentative division of free-bit space

[khw] regexp.h: Comment shared-pool free bits scheme

[khw] op.h: Move flag bits; comment shared-bit scheme

[khw] regcomp.c: Move some statements

[khw] regcomp.c: Extract duplicated code to fcn

[khw] regcomp.h: Use existing macro instead of reinventing

[khw] regcomp.h: Remove obsolete #defines

[khw] regcomp.c: Outdent line to align with neighbors

[khw] regcomp.h: Add comment

[khw] regcomp.sym: ANYOF nodes have an argument

[khw] regcomp.c: Add a function and use it

[khw] regcomp.c: Add assertions

[khw] Up regex flags limit for (??{})

[khw] op_reg_common.h: #define in terms of more basic one

[khw] Make space for /xx flag

[khw] op_reg_common.h: White-space only

[khw] toke.c: Clarify comment

[khw] Deprecate multiple "x" in "/xx"

[khw] B/Makefile.PL: Allow constants to be long/unsigned

[khw] op_reg_common.h: Update comment

[khw] Suppress some Solaris warnings

[khw] regcomp.c: Properly dereference a ptr

------------------------------------------
[...truncated 12202 lines...]
_POSIX_SOURCE
__PTRDIFF_TYPE__
_REENTRANT
__REGISTER_PREFIX__
__SCHAR_MAX__
__SHRT_MAX__
__SIZEOF_DOUBLE__
__SIZEOF_FLOAT__
__SIZEOF_INT__
__SIZEOF_LONG__
__SIZEOF_LONG_DOUBLE__
__SIZEOF_LONG_LONG__
__SIZEOF_POINTER__
__SIZEOF_PTRDIFF_T__
__SIZEOF_SHORT__
__SIZEOF_SIZE_T__
__SIZEOF_WCHAR_T__
__SIZEOF_WINT_T__
__SIZE_TYPE__
__SSE__
__SSE2__
__SSE2_MATH__
__SSE_MATH__
__STDC__
__STDC_HOSTED__
__UINTMAX_TYPE__
__unix
__unix__
unix
__USE_BSD
__USE_FILE_OFFSET64
__USE_GNU
__USE_LARGEFILE
__USE_LARGEFILE64
__USE_MISC
__USE_POSIX
__USE_POSIX199309
__USE_POSIX199506
__USE_POSIX2
__USE_REENTRANT
__USER_LABEL_PREFIX__
__USE_SVID
__USE_UNIX98
__USE_XOPEN
__USE_XOPEN_EXTENDED
__VERSION__
__WCHAR_MAX__
__WCHAR_TYPE__
__WINT_TYPE__
__x86_64
__x86_64__
_XOPEN_SOURCE
_XOPEN_SOURCE_EXTENDED
Adding -D_FORTIFY_SOURCE=2 to ccflags...
 
tcsetattr() found.
 
You have POSIX termios.h... good!
 
<stdbool.h> found.
 
<stddef.h> found.
 
<stdint.h> found.
 
<sys/access.h> NOT found.
 
<sys/filio.h> NOT found.
 
<sys/ioctl.h> found.
 
<sys/sockio.h> not found, assuming socket ioctls are in <sys/ioctl.h>.
 
<syslog.h> found.
 
<sys/mode.h> NOT found.
 
<sys/poll.h> found.
 
<sys/resource.h> found.
 
<sys/security.h> NOT found.
 
<sys/statvfs.h> found.
 
<sys/un.h> found.
 
<sys/utsname.h> found.
 
<sys/wait.h> found.
 
<ustat.h> found.
 
<utime.h> found.
 
Looking for extensions...
A number of extensions are supplied with perl5.  You may choose to
compile these extensions for dynamic loading (the default), compile
them into the perl5 executable (static loading), or not include
them at all.  Answer "none" to include no extensions.
Note that DynaLoader is always built and need not be mentioned here.

What extensions do you wish to load dynamically?
[arybase attributes B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd Data/Dumper DB_File Devel/Peek Devel/PPPort Digest/MD5 Digest/SHA Encode Fcntl File/DosGlob File/Glob Filter/Util/Call GDBM_File Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util Math/BigInt/FastCalc MIME/Base64 mro NDBM_File Opcode PerlIO/encoding PerlIO/mmap PerlIO/scalar PerlIO/via POSIX re SDBM_File Socket Storable Sys/Hostname Sys/Syslog threads threads/shared Tie/Hash/NamedCapture Time/HiRes Time/Piece Unicode/Collate XS/APItest XS/Typemap]  
What extensions do you wish to load statically? [none]  
 
 
End of configuration questions.
 
 
Stripping down executable paths...
 
Creating config.sh...
Hmm...You had some extra variables I don't know about...I'll try to keep 'em...
    Propagating recommended variable $libdb_needs_pthread...
 
Doing variable substitutions on .SH files...
Extracting config.h (with variable substitutions)
cflags.SH: cc       = ccache g++
cflags.SH: ccflags  = -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2
cflags.SH: stdflags = 
cflags.SH: optimize = -O2
cflags.SH: warn     =  -Wall
Extracting cflags (with variable substitutions)
Not re-extracting config.h
Extracting makedepend (with variable substitutions)
Extracting Makefile (with variable substitutions)
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting runtests (with variable substitutions)

Now you need to generate make dependencies by running "make depend".
You might prefer to run it in background: "make depend > makedepend.out &"
It can take a while, so you might not want to run it right now.

Run make depend now? [y]  
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall generate_uudmap.c
ccache g++ -o generate_uudmap -fstack-protector -L/usr/local/lib generate_uudmap.o -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc 
./generate_uudmap uudmap.h bitcount.h mg_data.h
sh ./makedepend MAKE="make" cflags
make[1]: Entering directory `<http://perl5.git.perl.org:8080/job/perl5-threaded/ws/'>
rm -f opmini.c
/bin/ln -s op.c opmini.c
rm -f perlmini.c
/bin/ln -s perl.c perlmini.c
echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c  miniperlmain.c opmini.c perlmini.c | tr ' ' '\n' >.clist
make[1]: Leaving directory `<http://perl5.git.perl.org:8080/job/perl5-threaded/ws/'>
Finding dependencies for av.o.
Finding dependencies for scope.o.
Finding dependencies for op.o.
Finding dependencies for doop.o.
Finding dependencies for doio.o.
Finding dependencies for dump.o.
Finding dependencies for gv.o.
Finding dependencies for hv.o.
Finding dependencies for mg.o.
Finding dependencies for reentr.o.
Finding dependencies for mro.o.
Finding dependencies for perl.o.
Finding dependencies for perly.o.
Finding dependencies for pp.o.
Finding dependencies for pp_hot.o.
Finding dependencies for pp_ctl.o.
Finding dependencies for pp_sys.o.
Finding dependencies for regcomp.o.
Finding dependencies for regexec.o.
Finding dependencies for utf8.o.
Finding dependencies for sv.o.
Finding dependencies for taint.o.
Finding dependencies for toke.o.
Finding dependencies for util.o.
Finding dependencies for deb.o.
Finding dependencies for run.o.
Finding dependencies for universal.o.
Finding dependencies for pad.o.
Finding dependencies for globals.o.
Finding dependencies for keywords.o.
Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for mathoms.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for caretx.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for opmini.o.
Finding dependencies for perlmini.o.
Updating makefile...
Now you must run 'make'.

If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.

[perl5-threaded] $ /bin/bash -xe /tmp/hudson4824442068319985330.sh
+ make -j8
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall pad.c
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall regcomp.c
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall dump.c
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall mg.c
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall keywords.c
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall reentr.c
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall util.c
ccache g++ -c -DPERL_CORE -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -O2 -Wall mro.c
In file included from regexp.h:273,
                 from perl.h:3661,
                 from reentr.c:27:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
In file included from regexp.h:273,
                 from perl.h:3661,
                 from keywords.c:9:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
In file included from regexp.h:273,
                 from perl.h:3661,
                 from pad.c:143:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
In file included from regexp.h:273,
                 from perl.h:3661,
                 from dump.c:29:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
In file included from regexp.h:273,
                 from perl.h:3661,
                 from util.c:26:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
In file included from regexp.h:273,
                 from perl.h:3661,
                 from regcomp.c:75:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
In file included from regexp.h:273,
                 from perl.h:3661,
                 from mg.c:43:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
In file included from regexp.h:273,
                 from perl.h:3661,
                 from mro.c:27:
op_reg_common.h:104:30: error: missing binary operator before token "2147483647"
make: *** [reentr.o] Error 1
make: *** Waiting for unfinished jobs....
make: *** [mro.o] Error 1
make: *** [pad.o] Error 1
make: *** [mg.o] Error 1
make: *** [util.o] Error 1
make: *** [keywords.o] Error 1
make: *** [dump.o] Error 1
make: *** [regcomp.o] Error 1
Build step 'Execute shell' marked build as failure

Thread Next


nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About