develooper Front page | perl.perl5.porters | Postings from September 2012

Smoke [5.17.5] v5.17.4-65-g736be88 FAIL(m) linux 3.2.0-3-amd64[debian] (x86_64/2 cpu)

From:
njh
Date:
September 25, 2012 17:28
Subject:
Smoke [5.17.5] v5.17.4-65-g736be88 FAIL(m) linux 3.2.0-3-amd64[debian] (x86_64/2 cpu)
Message ID:
201209260028.q8Q0Saj1019638@compaq.bandsman.co.uk
Automated smoke report for 5.17.5 patch 736be88fdd627ea774a29942bde021e39c4e7d8e v5.17.4-65-g736be88
compaq.bandsman.co.uk: AMD Athlon(tm) Dual Core Processor 4450e (AuthenticAMD 2300MHz) (x86_64/2 cpu)
    on        linux - 3.2.0-3-amd64 [debian]
    using     cc version 4.7.2
    smoketime 2 minutes 26 seconds (average 2 minutes 26 seconds)

Summary: FAIL(m)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.17.4-65-g736be88  Configuration (common) -Accflags="-O2 -W -Wformat=2 -Wall -Wextra -pipe -mtune=native -march=native -fomit-frame-pointer -msse2 -msse -mmmx -mfpmath=sse -D_FORTIFY_SOURCE=2 -fstack-protector -Wstack-protector -Wfloat-equal"
----------- ---------------------------------------------------------
m - - -     -Duseithreads
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio  -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio


Locally applied patches:
    uncommitted-changes
    SMOKE736be88fdd627ea774a29942bde021e39c4e7d8e

Compiler messages(gcc):
Configure ...try.c: In function ‘main’:
try.c:1:14: warning: unused parameter ‘argc’ [-Wunused-parameter]
try.c:1:26: warning: unused parameter ‘argv’ [-Wunused-parameter]
try.c: In function ‘main’:
try.c: In function ‘blech’:
try.c:8:16: warning: unused parameter ‘s’ [-Wunused-parameter]
try.c: In function ‘blech_in_list’:
try.c:9:24: warning: unused parameter ‘s’ [-Wunused-parameter]
try.c:31:1: warning: control reaches end of non-void function [-Wreturn-type]
try.c:28:16: warning: unused parameter ‘x’ [-Wunused-parameter]
try.c:36:6: warning: ignoring return value of ‘pipe’, declared with attribute warn_unused_result [-Wunused-result]
try.c:37:6: warning: ignoring return value of ‘pipe’, declared with attribute warn_unused_result [-Wunused-result]
try.c:53:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
try.c:66:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
try.c:72:8: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
try.c:78:6: warning: ignoring return value of ‘read’, declared with attribute warn_unused_result [-Wunused-result]
try.c:8:16: warning: unused parameter ‘x’ [-Wunused-parameter]
try.c:3:15: warning: unused parameter ‘argc’ [-Wunused-parameter]
try.c:3:27: warning: unused parameter ‘argv’ [-Wunused-parameter]
try.c: In function ‘bletch’:
try.c:11:17: warning: unused parameter ‘s’ [-Wunused-parameter]
try.c:12:26: warning: unused parameter ‘argv’ [-Wunused-parameter]
try.c:52:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
op.c: In function ‘Perl_scalarvoid’:
op.c:1370:36: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c:1370:55: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perl.c: In function ‘Perl_eval_pv’:
perl.c:2868:27: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘S_new_logop’:
op.c:5842:26: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c:5843:26: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘Perl_newCONDOP’:
op.c:6002:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘Perl_newLOOPOP’:
op.c:6151:44: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
op.c: In function ‘Perl_newWHILEOP’:
op.c:6297:46: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perl.c: In function ‘S_init_tls_and_interp’:
perl.c:103:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
perl.c: In function ‘perl_parse’:
perl.c:1468:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
gv.c: In function ‘Perl_Gv_AMupdate’:
gv.c:2281:14: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
gv.c: In function ‘Perl_amagic_call’:
gv.c:2698:17: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
gv.c:3073:7: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
toke.c: In function ‘S_printbuf’:
toke.c:477:5: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
toke.c: In function ‘Perl_yylex’:
toke.c:7197:12: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
toke.c: In function ‘S_pending_ident’:
toke.c:8686:17: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
toke.c: In function ‘S_new_constant’:
toke.c:8922:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
regcomp.c: In function ‘S_make_trie’:
regcomp.c:1687:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
regcomp.c: In function ‘S_compile_runtime_code’:
regcomp.c:5123:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
toke.c: In function ‘S_missingterm’:
toke.c:577:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
dquote_static.c: In function ‘S_grok_bslash_c’:
dquote_static.c:45:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
dump.c: In function ‘Perl_sv_peek’:
dump.c:479:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
dump.c:490:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
util.c: In function ‘Perl_my_strftime’:
util.c:4042:3: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
util.c:4066:7: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
util.c: In function ‘S_write_no_mem’:
util.c:67:5: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
mg.c: In function ‘Perl_magic_setdbline’:
mg.c:2028:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
mg.c: In function ‘Perl_sighandler’:
mg.c:3225:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
hv.c: In function ‘Perl_hv_common’:
hv.c:505:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_fetch’:
av.c:236:36: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_store’:
av.c:327:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_delete’:
av.c:867:28: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c: In function ‘Perl_av_exists’:
av.c:957:28: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
av.c:980:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_and’:
pp_hot.c:104:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_cond_expr’:
pp_hot.c:221:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_or’:
pp_hot.c:390:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_hot.c: In function ‘Perl_pp_grepwhile’:
pp_hot.c:2437:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘S_sv_2iuv_non_preserve’:
sv.c:1951:29: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:1960:25: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘S_sv_2iuv_common’:
sv.c:2006:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:2049:14: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:2195:41: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_2pv_flags’:
sv.c:2890:16: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_2bool_flags’:
sv.c:3085:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:3089:12: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_inc_nomg’:
sv.c:7955:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_dec_nomg’:
sv.c:8140:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_true’:
sv.c:9001:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘S_F0convert’:
sv.c:9964:19: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_sv_vcatpvfn_flags’:
sv.c:10841:43: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c:10985:4: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c:10986:4: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c: In function ‘Perl_sv_cat_decode’:
sv.c:13793:8: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_report_uninit’:
sv.c:14420:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c:14424:7: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
sv.c: In function ‘Perl_dirp_dup’:
sv.c:11381:11: warning: ignoring return value of ‘fchdir’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:10086:7: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:10935:7: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:2899:6: warning: ignoring return value of ‘gcvt’, declared with attribute warn_unused_result [-Wunused-result]
pp.c: In function ‘Perl_pp_divide’:
pp.c:1469:12: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_pp_modulo’:
pp.c:1569:10: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c:1573:34: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_do_ncmp’:
pp.c:2044:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_pp_not’:
pp.c:2277:20: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp.c: In function ‘Perl_pp_rand’:
pp.c:2711:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_formline’:
pp_ctl.c:885:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
pp_ctl.c: In function ‘Perl_pp_range’:
pp_ctl.c:1146:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_flip’:
pp_ctl.c:1175:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_flop’:
pp_ctl.c:1268:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_xor’:
pp_ctl.c:1718:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:1718:25: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_return’:
pp_ctl.c:2424:44: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_leaveeval’:
pp_ctl.c:4191:24: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘S_matcher_matches_sv’:
pp_ctl.c:4363:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘S_do_smartmatch’:
pp_ctl.c:4473:22: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:4505:22: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:4716:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c:4777:11: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
sv.c: In function ‘Perl_varname’:
sv.c:13888:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
pp_ctl.c:4848:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘Perl_pp_enterwhen’:
pp_ctl.c:4873:52: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_ctl.c: In function ‘S_run_user_filter’:
pp_ctl.c:5361:22: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_stat’:
pp_sys.c:2842:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
pp_sys.c: In function ‘S_try_amagic_ftest’:
pp_sys.c:2988:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_ftis’:
pp_sys.c:3160:9: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sys.c: In function ‘Perl_pp_fttext’:
pp_sys.c:3398:3: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
pp_sys.c: In function ‘Perl_pp_gmtime’:
pp_sys.c:4517:11: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
doio.c: In function ‘Perl_do_openn’:
doio.c:541:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
doio.c: In function ‘Perl_my_stat_flags’:
doio.c:1326:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
doio.c: In function ‘Perl_my_lstat_flags’:
doio.c:1366:2: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
doio.c: In function ‘S_exec_failed’:
doio.c:1379:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
doio.c: In function ‘Perl_nextargv’:
doio.c:876:7: warning: ignoring return value of ‘fchown’, declared with attribute warn_unused_result [-Wunused-result]
regexec.c: In function ‘S_regmatch’:
regexec.c:4546:12: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
utf8.c: In function ‘Perl__core_swash_init’:
utf8.c:2876:11: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
utf8.c:2899:7: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
utf8.c: In function ‘Perl_swash_fetch’:
utf8.c:3050:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
utf8.c: In function ‘Perl__swash_to_invlist’:
utf8.c:3881:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
taint.c: In function ‘Perl_taint_proper’:
taint.c:69:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral]
universal.c: In function ‘Perl_sv_does_sv’:
universal.c:231:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_Internals_SvREADONLY’:
universal.c:910:6: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_PerlIO_get_layers’:
universal.c:987:16: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c:993:17: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c:999:18: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_re_regname’:
universal.c:1183:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
universal.c: In function ‘XS_re_regnames’:
universal.c:1216:23: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perlio.c: In function ‘XS_PerlIO__Layer__find’:
perlio.c:961:34: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perlio.c: In function ‘S_more_refcounted_fds’:
perlio.c:2341:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
perlio.c: In function ‘PerlIO_debug’:
perlio.c:476:2: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
perlio.c: In function ‘PerlIO_getc’:
perlio.c:4907:1: warning: stack protector not protecting function: all local arrays are less than 8 bytes long [-Wstack-protector]
numeric.c: In function ‘S_mulexp10’:
numeric.c:783:15: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_sv_ncmp’:
pp_sort.c:1894:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c:1894:27: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_ncmp’:
pp_sort.c:1935:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_i_ncmp’:
pp_sort.c:1956:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_cmp’:
pp_sort.c:1977:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
pp_sort.c: In function ‘S_amagic_cmp_locale’:
pp_sort.c:1998:13: warning: comparing floating point with == or != is unsafe [-Wfloat-equal]
perly.c:42:0: warning: "YYDEBUG" redefined [enabled by default]
perly.tab:237:32: error: ‘YY_NULL’ undeclared here (not in a function)

-- 
Report by Test::Smoke v1.44 build 1285 running on perl 5.14.2
(Reporter v0.035 / Smoker v0.045)



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About