Front page | perl.perl5.porters |
Postings from February 2012
Starting my perl adventure
Thread Next
From:
Michael Andreacchio
Date:
February 27, 2012 07:58
Subject:
Starting my perl adventure
Message ID:
5.12.4_21850_1330334243@crevice.it.uts.edu.au
This is a thank-you report for perl from mandreacchio@atlassian.com,
generated with the help of perlbug 1.39 running under perl 5.12.4.
-----------------------------------------------------------------
Hi thanks for making Perl free and available for everyones use. Surely changed the world in many ways!
I'm just starting out, I'm currently not a programmer, more like a make-shift sys-admin but would like to go more places so I hope that Perl can take me there. I hope that I can only dedicate my time and effort towards getting this right and learning the best I can. So yeah thanks again for the tools, I'm sure I'll find them useful :)
-----------------------------------------------------------------
---
Flags:
category=thanks
severity=none
---
This perlbug was built using Perl 5.12.4 in the Fedora build system.
It is being executed now by Perl 5.12.4 - Fri Nov 4 16:22:36 UTC 2011.
Site configuration information for perl 5.12.4:
Configured by Red Hat, Inc. at Fri Nov 4 16:22:36 UTC 2011.
Summary of my perl5 (revision 5 version 12 subversion 4) configuration:
Platform:
osname=linux, osvers=2.6.32-131.2.1.el6.x86_64, archname=x86_64-linux-thread-multi
uname='linux x86-05.phx2.fedoraproject.org 2.6.32-131.2.1.el6.x86_64 #1 smp wed may 18 07:07:37 edt 2011 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Dccdlflags=-Wl,--enable-new-dtags -DDEBUGGING=-g -Dversion=5.12.4 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib64/perl5 -Dprivlib=/usr/share/perl5 -Dvendorlib=/usr/share/perl5 -Darchlib=/usr/lib64/perl5 -Dvendorarch=/usr/lib64/perl5 -Darchname=x86_64-linux-thread-multi -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Duseshrplib -Dusethreads -Duseithreads -Dusedtrace=/usr/bin/dtrace -Duselargefiles -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto
-Ud_endservent_r_proto -Ud_setservent_r_proto -Dscriptdir=/usr/bin -Dotherlibdirs=/usr/local/lib64/perl5/site_perl/5.10.0/x86_64-linux-thread-multi:/usr/local/lib/perl5/site_perl/5.10.0:/usr/lib64/perl5/vendor_perl/5.10.0/x86_64-linux-thread-multi:/usr/lib/perl5/vendor_perl:/usr/lib/perl5/site_perl'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.5.1 20100924 (Red Hat 4.5.1-4)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -fstack-protector'
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.13'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,--enable-new-dtags -Wl,-rpath,/usr/lib64/perl5/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic'
Locally applied patches:
---
@INC for perl 5.12.4:
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5
/usr/share/perl5
/usr/lib64/perl5
/usr/share/perl5
/usr/local/lib64/perl5/site_perl/5.10.0/x86_64-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib64/perl5/vendor_perl/5.10.0/x86_64-linux-thread-multi
/usr/lib/perl5/vendor_perl
/usr/lib/perl5/site_perl
.
---
Environment for perl 5.12.4:
HOME=/student/11158704
LANG=en_AU.UTF-8
LANGUAGE=
LD_LIBRARY_PATH (unset)
LOGDIR (unset)
PATH=/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/bluej:/opt/IHMC_CmapTools:/usr/NX/bin:/opt/bea10/wlserver_10.3:/student/11158704/bin:/usr/NX/bin:/usr/NX/bin
PERL_BADLANG (unset)
SHELL=/bin/bash
Thread Next
-
Starting my perl adventure
by Michael Andreacchio