develooper Front page | perl.perl5.porters | Postings from March 2011

Smoke [5.13.11] v5.13.11-277-ga27ff1b FAIL(F) openbsd 4.8 (i386/1 cpu)

From:
Steven Schubiger
Date:
March 26, 2011 09:41
Subject:
Smoke [5.13.11] v5.13.11-277-ga27ff1b FAIL(F) openbsd 4.8 (i386/1 cpu)
Message ID:
4d8e1718.dd25e30a.648c.469a@mx.google.com
Automated smoke report for 5.13.11 patch a27ff1be2567c0c790cb0164b86f0ed0ee47cf37 v5.13.11-277-ga27ff1b
p5openbsd: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) (909 MHz) (i386/1 cpu)
    on        openbsd - 4.8
    using     cc version 4.2.1 20070719
    smoketime 17 hours 40 minutes (average 2 hours 12 minutes)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.13.11-277-ga27ff1b  Configuration (common) none
----------- ---------------------------------------------------------
O O O O     
O O O O     -Duse64bitint
F F F F     -Duseithreads
F F F F     -Duseithreads -Duse64bitint
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio  -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio


Locally applied patches:
    uncommitted-changes
    SMOKEa27ff1be2567c0c790cb0164b86f0ed0ee47cf37

Failures: (common-args) none
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
    ../t/op/sigdispatch.t.......................................FAILED
        Bad plan.  You planned 15 tests but ran 0.

Compiler messages(gcc):
Configure .../tmp//ccnbhPk9.o(.text+0x29): In function `xxx':
/tmp//ccP7oUdG.o(.text+0x159): In function `main':
sv.o(.text+0x4e0d): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x4e0d): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x775): In function `XS_DynaLoader_dl_load_file':
util.o(.text+0x2fc): In function `savestr':
str.o(.text+0x479): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x4e0d): In function `Perl_sv_2pv_flags':
Configure .../tmp//cckF9OLE.o(.text+0x29): In function `xxx':
/home/sts/source/p5-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()
/tmp//ccDiNk29.o(.text+0x159): In function `main':
/home/sts/source/p5-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()
sv.o(.text+0x1532f): In function `Perl_sv_2pv_flags':
/home/sts/source/p5-current/sv.c:2762: warning: sprintf() is often misused, please use snprintf()
libperl.a(sv.o)(.text+0x1532f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x172a): In function `XS_DynaLoader_dl_load_file':
/home/sts/source/p5-current/ext/DynaLoader/DynaLoader.xs:174: warning: strcat() is almost always misused, please use strlcat()
util.o(.text+0x40c): In function `savestr':
/home/sts/source/p5-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()
str.o(.text+0x483): In function `str_2ptr':
/home/sts/source/p5-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()
../libperl.a(sv.o)(.text+0x1532f): In function `Perl_sv_2pv_flags':
Configure .../tmp//cczaWYa1.o(.text+0x29): In function `xxx':
/tmp//ccao9GyE.o(.text+0x159): In function `main':
sv.o(.text+0x509f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x509f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x785): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x509f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccNagh99.o(.text+0x29): In function `xxx':
/tmp//ccz0nIua.o(.text+0x159): In function `main':
sv.o(.text+0xe1a4): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0xe1a4): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x174a): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0xe1a4): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccaUvF00.o(.text+0x29): In function `xxx':
/tmp//ccrMUB72.o(.text+0x159): In function `main':
sv.o(.text+0x8017): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x8017): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8c7): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x8017): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccpuznvk.o(.text+0x29): In function `xxx':
/tmp//cceJvieF.o(.text+0x159): In function `main':
sv.o(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x19e8): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccRoEMHA.o(.text+0x29): In function `xxx':
/tmp//ccP9s2Ig.o(.text+0x159): In function `main':
sv.o(.text+0x8332): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x8332): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8d7): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x8332): In function `Perl_sv_2pv_flags':
Configure .../tmp//cceRpJ87.o(.text+0x29): In function `xxx':
/tmp//ccWAC8Fh.o(.text+0x159): In function `main':
sv.o(.text+0x13264): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x13264): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x1a08): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x13264): In function `Perl_sv_2pv_flags':

-- 
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About