develooper Front page | perl.perl5.porters | Postings from March 2011

Smoke [5.13.11] v5.13.11-100-g167630b FAIL(F) openbsd 4.8 (i386/1 cpu)

From:
Steven Schubiger
Date:
March 24, 2011 09:41
Subject:
Smoke [5.13.11] v5.13.11-100-g167630b FAIL(F) openbsd 4.8 (i386/1 cpu)
Message ID:
4d8b742f.0d26e30a.5212.03a0@mx.google.com
Automated smoke report for 5.13.11 patch 167630b6ab7e291cbd4f89943a3aec8d6a1ecbfc v5.13.11-100-g167630b
p5openbsd: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) (909 MHz) (i386/1 cpu)
    on        openbsd - 4.8
    using     cc version 4.2.1 20070719
    smoketime 17 hours 40 minutes (average 2 hours 12 minutes)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.13.11-100-g167630b  Configuration (common) none
----------- ---------------------------------------------------------
O O O O     
O O O O     -Duse64bitint
F F F F     -Duseithreads
F F F F     -Duseithreads -Duse64bitint
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio  -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio


Locally applied patches:
    uncommitted-changes
    SMOKE167630b6ab7e291cbd4f89943a3aec8d6a1ecbfc

Failures: (common-args) none
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
    ../t/op/sigdispatch.t.......................................FAILED
        Bad plan.  You planned 15 tests but ran 0.

Compiler messages(gcc):
Configure .../tmp//ccHvrl8E.o(.text+0x29): In function `xxx':
/tmp//ccJ0Swpm.o(.text+0x159): In function `main':
sv.o(.text+0x4e0d): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x4e0d): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x775): In function `XS_DynaLoader_dl_load_file':
util.o(.text+0x2fc): In function `savestr':
str.o(.text+0x479): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x4e0d): In function `Perl_sv_2pv_flags':
Configure .../tmp//cc1twpu7.o(.text+0x29): In function `xxx':
/home/sts/source/p5-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()
/tmp//ccs00YdS.o(.text+0x159): In function `main':
/home/sts/source/p5-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()
sv.o(.text+0x1532f): In function `Perl_sv_2pv_flags':
/home/sts/source/p5-current/sv.c:2762: warning: sprintf() is often misused, please use snprintf()
libperl.a(sv.o)(.text+0x1532f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x172a): In function `XS_DynaLoader_dl_load_file':
/home/sts/source/p5-current/ext/DynaLoader/DynaLoader.xs:174: warning: strcat() is almost always misused, please use strlcat()
util.o(.text+0x40c): In function `savestr':
/home/sts/source/p5-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()
str.o(.text+0x483): In function `str_2ptr':
/home/sts/source/p5-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()
../libperl.a(sv.o)(.text+0x1532f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccOLeeBk.o(.text+0x29): In function `xxx':
/tmp//ccefLAsW.o(.text+0x159): In function `main':
sv.o(.text+0x509f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x509f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x785): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x509f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccYTpGbJ.o(.text+0x29): In function `xxx':
/tmp//ccKFHMDW.o(.text+0x159): In function `main':
sv.o(.text+0xe1a4): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0xe1a4): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x174a): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0xe1a4): In function `Perl_sv_2pv_flags':
Configure .../tmp//cc6Wf2Wa.o(.text+0x29): In function `xxx':
/tmp//cc0ibLPN.o(.text+0x159): In function `main':
sv.o(.text+0x8017): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x8017): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8c7): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x8017): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccjiRKPP.o(.text+0x29): In function `xxx':
/tmp//ccUauQjm.o(.text+0x159): In function `main':
sv.o(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x19e8): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccmhP9rA.o(.text+0x29): In function `xxx':
/tmp//ccrU7bZL.o(.text+0x159): In function `main':
sv.o(.text+0x8332): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x8332): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8d7): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x8332): In function `Perl_sv_2pv_flags':
Configure .../tmp//cch8FqTC.o(.text+0x29): In function `xxx':
/tmp//ccbAqAlP.o(.text+0x159): In function `main':
sv.o(.text+0x13264): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x13264): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x1a08): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x13264): In function `Perl_sv_2pv_flags':

-- 
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About