develooper Front page | perl.perl5.porters | Postings from September 2009

Smoke [5.11.0] blead-2353-g9988b53 FAIL(t) openbsd 4.5 (i386/1 cpu)

From:
Steven Schubiger
Date:
September 20, 2009 17:48
Subject:
Smoke [5.11.0] blead-2353-g9988b53 FAIL(t) openbsd 4.5 (i386/1 cpu)
Message ID:
4ab6cd68.1c05d00a.3374.ffff9f90@mx.google.com
Automated smoke report for 5.11.0 patch 9988b539d419b6c4e886f8919681acc06cd5d04a blead-2353-g9988b53
p5openbsd: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) (909 MHz) (i386/1 cpu)
    on        openbsd - 4.5
    using     cc version 3.3.5 (propolice)
    smoketime 2 hours 33 minutes (average 19 minutes 8 seconds)

Summary: FAIL(t)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

blead-2353-g9988b53  Configuration (common) none
----------- ---------------------------------------------------------
t - t -     
t - t -     -Duse64bitint
t - t -     -Duseithreads
t - t -     -Duseithreads -Duse64bitint
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio  -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio


Locally applied patches:
    SMOKE9988b539d419b6c4e886f8919681acc06cd5d04a

Compiler messages(gcc):
Configure .../tmp//ccEpTgoa.o(.text+0x3e): In function `main':
/tmp//cchapDsG.o(.text+0x5d): In function `main':
/tmp//ccsfeqPR.o(.text+0x1c): In function `xxx':
/tmp//ccmZlorm.o(.text+0xde): In function `main':
sv.o(.text+0x1d8b): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x242): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0x1d8b): In function `Perl_sv_2pv_flags':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definition
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definition
util.o(.text+0x1b3): In function `savestr':
str.o(.text+0x5d): In function `str_2ptr':
Configure .../tmp//ccjkMtGC.o(.text+0x3e): In function `main':
/home/sts/source/p5-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()
/tmp//ccySgZIi.o(.text+0x5d): In function `main':
/home/sts/source/p5-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()
/tmp//ccXOEQmg.o(.text+0x1c): In function `xxx':
/home/sts/source/p5-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()
/tmp//ccFKRQlk.o(.text+0xde): In function `main':
/home/sts/source/p5-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()
sv.o(.text+0xb7ff): In function `Perl_sv_2pv_flags':
/home/sts/source/p5-current/sv.c:2774: warning: sprintf() is often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x556): In function `XS_DynaLoader_dl_load_file':
/home/sts/source/p5-current/ext/DynaLoader/DynaLoader.xs:171: warning: strcat() is almost always misused, please use strlcat()
libperl.a(sv.o)(.text+0xb7ff): In function `Perl_sv_2pv_flags':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definition
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definition
util.o(.text+0x283): In function `savestr':
/home/sts/source/p5-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()
str.o(.text+0x81): In function `str_2ptr':
/home/sts/source/p5-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()
Configure .../tmp//ccmqKrEk.o(.text+0x3e): In function `main':
/tmp//ccRnGNee.o(.text+0x5d): In function `main':
/tmp//ccrqrxmZ.o(.text+0x1c): In function `xxx':
/tmp//ccXPBMKS.o(.text+0xde): In function `main':
sv.o(.text+0x224f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x224f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccpmAldc.o(.text+0x3e): In function `main':
/tmp//ccwSnqfs.o(.text+0x5d): In function `main':
/tmp//ccdLvFtP.o(.text+0x1c): In function `xxx':
/tmp//ccHFqkAJ.o(.text+0xde): In function `main':
regexec.c: In function `Perl_regexec_flags':
regexec.c:1826: warning: long long unsigned int format, different type arg (arg 3)
regexec.c:1833: warning: long long int format, different type arg (arg 3)
regexec.c:1840: warning: long long unsigned int format, different type arg (arg 3)
sv.o(.text+0xac26): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x55a): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0xac26): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccFNSCOx.o(.text+0x3e): In function `main':
/tmp//ccjQtMyI.o(.text+0x5d): In function `main':
/tmp//ccAmmkge.o(.text+0x1c): In function `xxx':
/tmp//ccOnAbGA.o(.text+0xde): In function `main':
sv.o(.text+0x1ee7): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x4aa): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0x1ee7): In function `Perl_sv_2pv_flags':
Configure .../tmp//cciWQvJP.o(.text+0x3e): In function `main':
/tmp//ccZOZcpu.o(.text+0x5d): In function `main':
/tmp//ccbkwTxs.o(.text+0x1c): In function `xxx':
/tmp//ccaGhxED.o(.text+0xde): In function `main':
sv.o(.text+0xba3b): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8de): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0xba3b): In function `Perl_sv_2pv_flags':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definition
Configure .../tmp//ccEATpAl.o(.text+0x3e): In function `main':
/tmp//ccIQTXfS.o(.text+0x5d): In function `main':
/tmp//cclEviqo.o(.text+0x1c): In function `xxx':
/tmp//ccnxXQci.o(.text+0xde): In function `main':
sv.o(.text+0x239b): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x239b): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccxkyHvT.o(.text+0x3e): In function `main':
/tmp//cchYIZbd.o(.text+0x5d): In function `main':
/tmp//ccddROJR.o(.text+0x1c): In function `xxx':
/tmp//ccjCBudr.o(.text+0xde): In function `main':
sv.o(.text+0xaebe): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0xaebe): In function `Perl_sv_2pv_flags':

-- 
Report by Test::Smoke v1.40 build 1242 running on perl 5.10.0
(Reporter v0.035 / Smoker v0.044)



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About