Front page | perl.perl5.porters |
Postings from August 2009
Automated smoke report for 5.11.0 patch 3fdd68c85f28d09152c7018524193b48ec4da9b5 blead-1877-g3fdd68c
p5openbsd: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) (909 MHz) (i386/1 cpu)
on openbsd - 4.5
using cc version 3.3.5 (propolice)
smoketime 15 hours 55 minutes (average 1 hour 59 minutes)
Summary: FAIL(F)
O = OK F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during: - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
blead-1877-g3fdd68c Configuration (common) none
----------- ---------------------------------------------------------
F F F F
F F F F -Duse64bitint
F F F F -Duseithreads
F F F F -Duseithreads -Duse64bitint
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio
Locally applied patches:
SMOKE3fdd68c85f28d09152c7018524193b48ec4da9b5
Failures: (common-args) none
[stdio/perlio]
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duse64bitint
[perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../lib/File/Copy.t..........................................FAILED
Bad plan. You planned 461 tests but ran 82.
[stdio] -Duseithreads
../lib/File/Copy.t..........................................FAILED
Bad plan. You planned 461 tests but ran 82.
../t/io/errno.t.............................................FAILED
16
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../lib/File/Copy.t..........................................FAILED
Bad plan. You planned 461 tests but ran 82.
Inconsistent test results (between TEST and harness):
../t/io/errno.t.........................FAILED at test 9
Compiler messages(gcc):
Configure .../tmp//cczRBsnr.o(.text+0x3e): In function `main':
/tmp//ccEDgQrc.o(.text+0x5d): In function `main':
/tmp//cckytDCI.o(.text+0x1c): In function `xxx':
/tmp//ccErXeqH.o(.text+0xde): In function `main':
sv.o(.text+0x1d8b): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x242): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0x1d8b): In function `Perl_sv_2pv_flags':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definition
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definition
util.o(.text+0x1b3): In function `savestr':
str.o(.text+0x5d): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x1d8b): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccxLBsLA.o(.text+0x3e): In function `main':
/home/sts/source/p5-current/UU/try.c:20: warning: sprintf() is often misused, please use snprintf()
/tmp//ccYvnaFu.o(.text+0x5d): In function `main':
/home/sts/source/p5-current/UU/try.c:29: warning: sprintf() is often misused, please use snprintf()
/tmp//ccfkrpIn.o(.text+0x1c): In function `xxx':
/home/sts/source/p5-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()
/tmp//ccawDTJi.o(.text+0xde): In function `main':
/home/sts/source/p5-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()
sv.o(.text+0xb7ff): In function `Perl_sv_2pv_flags':
/home/sts/source/p5-current/sv.c:2774: warning: sprintf() is often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x556): In function `XS_DynaLoader_dl_load_file':
/home/sts/source/p5-current/ext/DynaLoader/DynaLoader.xs:171: warning: strcat() is almost always misused, please use strlcat()
libperl.a(sv.o)(.text+0xb7ff): In function `Perl_sv_2pv_flags':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definition
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definition
util.o(.text+0x283): In function `savestr':
/home/sts/source/p5-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()
str.o(.text+0x81): In function `str_2ptr':
/home/sts/source/p5-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()
../libperl.a(sv.o)(.text+0xb7ff): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccvPrAuq.o(.text+0x3e): In function `main':
/tmp//ccIEOboS.o(.text+0x5d): In function `main':
/tmp//ccRmLceD.o(.text+0x1c): In function `xxx':
/tmp//ccwLRLLE.o(.text+0xde): In function `main':
sv.o(.text+0x224f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x224f): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0x224f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccjtUUIf.o(.text+0x3e): In function `main':
/tmp//ccDxSWWt.o(.text+0x5d): In function `main':
/tmp//ccmJVSWy.o(.text+0x1c): In function `xxx':
/tmp//ccbwfBvC.o(.text+0xde): In function `main':
sv.o(.text+0xac26): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x55a): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0xac26): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0xac26): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccqUAzDi.o(.text+0x3e): In function `main':
/tmp//ccDeEABv.o(.text+0x5d): In function `main':
/tmp//ccbIxKum.o(.text+0x1c): In function `xxx':
/tmp//ccQsPmGk.o(.text+0xde): In function `main':
sv.o(.text+0x1ee7): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x4aa): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0x1ee7): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0x1ee7): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccLLQZkU.o(.text+0x3e): In function `main':
/tmp//ccIKkDZv.o(.text+0x5d): In function `main':
/tmp//ccHkWufm.o(.text+0x1c): In function `xxx':
/tmp//ccEqYRxm.o(.text+0xde): In function `main':
sv.o(.text+0xba3b): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8de): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0xba3b): In function `Perl_sv_2pv_flags':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definition
../libperl.a(sv.o)(.text+0xba3b): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccIgpdnz.o(.text+0x3e): In function `main':
/tmp//ccyUdTkI.o(.text+0x5d): In function `main':
/tmp//ccorhvrt.o(.text+0x1c): In function `xxx':
/tmp//ccRkqshY.o(.text+0xde): In function `main':
sv.o(.text+0x239b): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x239b): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0x239b): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccbtclxU.o(.text+0x3e): In function `main':
/tmp//ccbziibX.o(.text+0x5d): In function `main':
/tmp//ccofqHbp.o(.text+0x1c): In function `xxx':
/tmp//ccfWRgfh.o(.text+0xde): In function `main':
sv.o(.text+0xaebe): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0xaebe): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0xaebe): In function `Perl_sv_2pv_flags':
--
Report by Test::Smoke v1.40 build 1242 running on perl 5.10.0
(Reporter v0.035 / Smoker v0.044)