develooper Front page | perl.perl5.porters | Postings from July 2009

Smoke [5.11.0] blead-1676-g1784bd3 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu)

From:
Steve Hay
Date:
July 26, 2009 20:51
Subject:
Smoke [5.11.0] blead-1676-g1784bd3 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu)
Message ID:
UKMAIL02oqFXfyY0QUU000004c6@ukmail02.planit.group
Automated smoke report for 5.11.0 patch 1784bd3e6b92cb1a7ca22884ab34a333c2b251bd blead-1676-g1784bd3
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     gcc version 3.4.2
    smoketime 4 hours 55 minutes (average 29 minutes 32 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

blead-1676-g1784bd3  Configuration (common) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duselargefiles -Duseithreads -Uuseimpsys
F F         -Duselargefiles -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duselargefiles -Duseithreads
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    SMOKE1784bd3e6b92cb1a7ca22884ab34a333c2b251bd

Failures: (common-args) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duselargefiles -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duselargefiles -Duseithreads -Uuseimpsys
[default] -Duselargefiles -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duselargefiles -Duseithreads
[default] -DDEBUGGING -Duselargefiles -Duseithreads
../t/run/switchC.t..........................................FAILED
    7-9
../t/op/reg_60508.t.........................................FAILED

Compiler messages(gcc):
Bzip2.xs: In function `GetErrorString':
Bzip2.xs:136: warning: unused variable `Perl___notused'
Bzip2.xs: In function `deRef':
Bzip2.xs:266: warning: unused variable `Perl___notused'
Bzip2.xs: In function `deRef_l':
Bzip2.xs:300: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_constant':
Bzip2.c:401: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_bzlibversion':
Bzip2.c:513: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_new':
Bzip2.c:534: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_new':
Bzip2.c:633: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_DispStream':
Bzip2.c:739: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_bzdeflate':
Bzip2.c:777: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_DESTROY':
Bzip2.c:869: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_bzclose':
Bzip2.c:899: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_bzflush':
Bzip2.c:985: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_total_in_lo32':
Bzip2.c:1073: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_total_out_lo32':
Bzip2.c:1105: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_compressedBytes':
Bzip2.c:1137: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bzip2_uncompressedBytes':
Bzip2.c:1169: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_DispStream':
Bzip2.c:1201: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_bzinflate':
Bzip2.c:1239: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_inflateCount':
Bzip2.c:1393: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_DESTROY':
Bzip2.c:1425: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_status':
Bzip2.c:1455: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_total_in_lo32':
Bzip2.c:1487: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_total_out_lo32':
Bzip2.c:1519: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_compressedBytes':
Bzip2.c:1551: warning: unused variable `Perl___notused'
Bzip2.c: In function `XS_Compress__Raw__Bunzip2_uncompressedBytes':
Bzip2.c:1583: warning: unused variable `Perl___notused'
Bzip2.c: In function `boot_Compress__Raw__Bzip2':
Bzip2.c:1617: warning: unused variable `Perl___notused'
Bzip2.xs:136: warning: unused variable `my_perl'
Bzip2.xs:266: warning: unused variable `my_perl'
Bzip2.xs:300: warning: unused variable `my_perl'
perlhost.h: In function `CPerlHost* IPerlMem2Host(IPerlMem*)':
perlhost.h:248: warning: invalid access to non-static data member `CPerlHost::m_hostperlMem' of NULL object
perlhost.h:248: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlMemShared2Host(IPerlMem*)':
perlhost.h:253: warning: invalid access to non-static data member `CPerlHost::m_hostperlMemShared' of NULL object
perlhost.h:253: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlMemParse2Host(IPerlMem*)':
perlhost.h:258: warning: invalid access to non-static data member `CPerlHost::m_hostperlMemParse' of NULL object
perlhost.h:258: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlEnv2Host(IPerlEnv*)':
perlhost.h:263: warning: invalid access to non-static data member `CPerlHost::m_hostperlEnv' of NULL object
perlhost.h:263: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlStdIO2Host(IPerlStdIO*)':
perlhost.h:268: warning: invalid access to non-static data member `CPerlHost::m_hostperlStdIO' of NULL object
perlhost.h:268: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlLIO2Host(IPerlLIO*)':
perlhost.h:273: warning: invalid access to non-static data member `CPerlHost::m_hostperlLIO' of NULL object
perlhost.h:273: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlDir2Host(IPerlDir*)':
perlhost.h:278: warning: invalid access to non-static data member `CPerlHost::m_hostperlDir' of NULL object
perlhost.h:278: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlSock2Host(IPerlSock*)':
perlhost.h:283: warning: invalid access to non-static data member `CPerlHost::m_hostperlSock' of NULL object
perlhost.h:283: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlProc2Host(IPerlProc*)':
perlhost.h:288: warning: invalid access to non-static data member `CPerlHost::m_hostperlProc' of NULL object
perlhost.h:288: warning: (perhaps the `offsetof' macro was used incorrectly)

-- 
Report by Test::Smoke v1.39 build 1235 running on perl 5.11.0
(Reporter v0.035 / Smoker v0.044)




nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About