develooper Front page | perl.perl5.porters | Postings from September 2008

Re: Perl-5.8.6 or Perl-5.8.5 Install/Build process on AIX 5.3 Make problem make: 1254-002 Cannot find a rule to create target <command-line> from dependencies. Stop.

Thread Previous | Thread Next
From:
Arshad
Date:
September 2, 2008 06:39
Subject:
Re: Perl-5.8.6 or Perl-5.8.5 Install/Build process on AIX 5.3 Make problem make: 1254-002 Cannot find a rule to create target <command-line> from dependencies. Stop.
Message ID:
5c63c0bb0809011153n40a4cb2cnf9dc62ec73929c7c@mail.gmail.com
Thanks for All the support and Quick reply.....


I have  installed perl-5.8.8 on AIX 5.3 and i an trying to build DBI-1.16
and DBD-Oracle-1.22

DBI-1.16 I have no issues...but when I try and install DBD-Oracle in make
step i am getting prob please help.....

Err
-----

"Makefile" 1040 lines, 31088 characters
PROD $ /usr/local/bin/make
cp Oracle.pm blib/lib/DBD/Oracle.pm
cp oraperl.ph blib/lib/oraperl.ph
cp dbdimp.h blib/arch/auto/DBD/Oracle/dbdimp.h
cp ocitrace.h blib/arch/auto/DBD/Oracle/ocitrace.h
cp Oraperl.pm blib/lib/Oraperl.pm
cp Oracle.h blib/arch/auto/DBD/Oracle/Oracle.h
cp lib/DBD/Oracle/GetInfo.pm blib/lib/DBD/Oracle/GetInfo.pm
cp mk.pm blib/arch/auto/DBD/Oracle/mk.pm
/usr/local/bin/perl -e 'use ExtUtils::Mksymlists; \
Mksymlists("NAME" => "DBD::Oracle", "DL_FUNCS" => {  }, "FUNCLIST" => [],
"DL_VARS" => []);'
/usr/local/bin/perl -p -e "s/~DRIVER~/Oracle/g"
/usr/local/lib/perl5/site_perl/5.8.8/aix/auto/DBI/Driver.xst > Oracle.xsi
/usr/local/bin/perl /usr/local/lib/perl5/5.8.8/ExtUtils/xsubpp  -typemap
/usr/local/lib/perl5/5.8.8/ExtUtils/typemap  Oracle.xs > Oracle.xsc && mv
Oracle.xsc Oracle.c
Error: 'OCILobLocator *' not in typemap in Oracle.xs, line 277
Error: 'OCILobLocator *' not in typemap in Oracle.xs, line 331
Error: 'OCILobLocator *' not in typemap in Oracle.xs, line 385
Error: 'OCILobLocator *' not in typemap in Oracle.xs, line 433
Error: 'OCILobLocator *' not in typemap in Oracle.xs, line 451
Error: 'OCILobLocator *' not in typemap in Oracle.xs, line 470
make: *** [Oracle.c] Error 1
PROD $

*I am very close to Finish this..please ...help...*

Thanks...



On Mon, Sep 1, 2008 at 10:17 PM, Arshad <arshad.moin@famsoft.com> wrote:

>  cd t
>        ./perl harness
>
> Test results
> ========
> pod/poderrs.................................ok
> pod/podselect...............................ok
> pod/special_seqs............................ok
> x2p/s2p.....................................ok
> Failed Test Stat Wstat Total Fail  Failed  List of Failed
>
> -------------------------------------------------------------------------------
> op/stat.t                 86    1   1.16%  38
> 58 tests and 240 subtests skipped.
> Failed 1/994 test scripts, 99.90% okay. 1/116881 subtests failed, 100.00%
> okay.
> -bash-3.00#
>
> Also tell me..how to set env to currectly refllect perl version.
>
> please guide me about the path LIBPATH
>
> Perl version is not reflecting please tell me how to set path.
>
> how to setevn on AIX 5.3 i have  2 instances of Oracle running
> i will work towards DBI and DBD-Oracle install now..and make
> to Oracle from perl scripts...
>
> Thanks for very quick reply....  once perl-5.8.8 install is done i am
> working towards DBI and DBD-Oracle install on AIX...
>
>
>
>
> On Mon, Sep 1, 2008 at 9:54 PM, Andy Dougherty <doughera@lafayette.edu>wrote:
>
>> On Mon, 1 Sep 2008, Arshad wrote:
>>
>> > Hello All,
>> >
>> > make is success and make test gives me this output... i am almost
>> > there..please advice
>>
>> Please follow the instructions in the output you quote below.  That is,
>> >
>> > t/pod/poderrs.............................ok
>> > t/pod/podselect...........................ok
>> > t/pod/special_seqs........................ok
>> > t/x2p/s2p.................................ok
>> > Failed 1 test script out of 933, 99.89% okay.
>> > ### Since not all tests were successful, you may want to run some of
>> > ### them individually and examine any diagnostic messages they produce.
>> > ### See the INSTALL document's section on "make test".
>> > ### You have a good chance to get more information by running
>> > ###   ./perl harness
>> > ### in the 't' directory since most (>=80%) of the tests succeeded.
>>
>> Please now run
>>
>>        cd t
>>        ./perl harness
>>
>> This will tell you which test failed.  Without knowing which test failed,
>> it is impossible to guess whether the failure is important or not.
>>
>> Once you know which test failed, you can run that individual test for more
>> information.  Sett eh INSTALL document's section on "make test".
>>
>> If you have configured a shared libperl.so, you also have to follow these
>> instructions:
>>
>> > ### You may have to set your dynamic library search path,
>> > ### LIBPATH, to point to the build directory:
>> > ###   setenv LIBPATH `pwd`; cd t; ./perl harness
>> > ###   LIBPATH=`pwd`; export LIBPATH; cd t; ./perl harness
>> > ###   export LIBPATH=`pwd`; cd t; ./perl harness
>> > ### for csh-style shells, like tcsh; or for traditional/modern
>> > ### Bourne-style shells, like bash, ksh, and zsh, respectively.
>>
>> --
>>     Andy Dougherty              doughera@lafayette.edu
>>
>
>
>
> --
> Thanks and Regards
> Mohammed Arshad
> Software Engineer
> FAMSOFT.
> www.famsoft.com
>



-- 
Thanks and Regards
Mohammed Arshad
Software Engineer
FAMSOFT.
www.famsoft.com

Thread Previous | Thread Next


nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About