develooper Front page | perl.perl5.porters | Postings from August 2008

Smoke [5.11.0] 34204 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu)

From:
Steve Hay
Date:
August 17, 2008 20:39
Subject:
Smoke [5.11.0] 34204 FAIL(F) MSWin32 WinXP/.Net SP3 (x86/2 cpu)
Message ID:
UKMAIL02Nm0QsTmlhnG000001dc@ukmail02.planit.group
Automated smoke report for 5.11.0 patch 34204
maldoror.bath.planit.group: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz(~2660 MHz) (x86/2 cpu)
    on        MSWin32 - WinXP/.Net SP3
    using     gcc version 3.4.2
    smoketime 5 hours 44 minutes (average 17 minutes 12 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

   34204     Configuration (common) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
----------- ---------------------------------------------------------
F F         
F F         -Dusemymalloc
F F         -Duselargefiles
F F         -Duselargefiles -Dusemymalloc
F F         -Duseithreads -Uuseimpsys
F F         -Duseithreads -Uuseimpsys -Dusemymalloc
F F         -Duseithreads -Uuseimpsys -Duselargefiles
F F         -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
F F         -Duseithreads
F F         -Duseithreads -Duselargefiles
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    DEVEL
    SMOKE34204

Failures: (common-args) -DINST_TOP=$(INST_DRV)\Smoke\doesntexist
[default] 
[default] -DDEBUGGING
[default] -DDEBUGGING -Dusemymalloc
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duselargefiles -Dusemymalloc
[default] -Duseithreads -Uuseimpsys
[default] -DDEBUGGING -Duseithreads -Uuseimpsys
[default] -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Dusemymalloc
[default] -Duseithreads -Uuseimpsys -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles
[default] -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -DDEBUGGING -Duseithreads -Uuseimpsys -Duselargefiles -Dusemymalloc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
comp/multiline.t............................................FAILED
    5-6
op/local.t..................................................FAILED
    121
../lib/Test/Harness/t/prove.t...............................FAILED
    83, 112, 141, 170, 199, 228, 257, 286, 315
    344, 373, 402, 431, 460, 489, 518, 547
    576, 605, 634, 663, 692, 722, 752, 782
    812, 842, 872, 902, 932, 962, 992, 1022
    1052, 1082, 1112, 1142, 1172, 1202, 1232
    1262, 1292, 1322, 1352, 1382, 1412, 1442
    1472, 1503, 1534, 1565, 1596

[default] -Dusemymalloc
comp/multiline.t............................................FAILED
    5-6
op/local.t..................................................FAILED
    121
op/rand.t...................................................FAILED
    5
../lib/Test/Harness/t/prove.t...............................FAILED
    83, 112, 141, 170, 199, 228, 257, 286, 315
    344, 373, 402, 431, 460, 489, 518, 547
    576, 605, 634, 663, 692, 722, 752, 782
    812, 842, 872, 902, 932, 962, 992, 1022
    1052, 1082, 1112, 1142, 1172, 1202, 1232
    1262, 1292, 1322, 1352, 1382, 1412, 1442
    1472, 1503, 1534, 1565, 1596

Compiler messages(gcc):
perlhost.h: In function `CPerlHost* IPerlMem2Host(IPerlMem*)':
perlhost.h:247: warning: invalid access to non-static data member `CPerlHost::m_hostperlMem' of NULL object
perlhost.h:247: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlMemShared2Host(IPerlMem*)':
perlhost.h:252: warning: invalid access to non-static data member `CPerlHost::m_hostperlMemShared' of NULL object
perlhost.h:252: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlMemParse2Host(IPerlMem*)':
perlhost.h:257: warning: invalid access to non-static data member `CPerlHost::m_hostperlMemParse' of NULL object
perlhost.h:257: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlEnv2Host(IPerlEnv*)':
perlhost.h:262: warning: invalid access to non-static data member `CPerlHost::m_hostperlEnv' of NULL object
perlhost.h:262: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlStdIO2Host(IPerlStdIO*)':
perlhost.h:267: warning: invalid access to non-static data member `CPerlHost::m_hostperlStdIO' of NULL object
perlhost.h:267: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlLIO2Host(IPerlLIO*)':
perlhost.h:272: warning: invalid access to non-static data member `CPerlHost::m_hostperlLIO' of NULL object
perlhost.h:272: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlDir2Host(IPerlDir*)':
perlhost.h:277: warning: invalid access to non-static data member `CPerlHost::m_hostperlDir' of NULL object
perlhost.h:277: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlSock2Host(IPerlSock*)':
perlhost.h:282: warning: invalid access to non-static data member `CPerlHost::m_hostperlSock' of NULL object
perlhost.h:282: warning: (perhaps the `offsetof' macro was used incorrectly)
perlhost.h: In function `CPerlHost* IPerlProc2Host(IPerlProc*)':
perlhost.h:287: warning: invalid access to non-static data member `CPerlHost::m_hostperlProc' of NULL object
perlhost.h:287: warning: (perhaps the `offsetof' macro was used incorrectly)

-- 
Report by Test::Smoke v1.34 build 1193 running on perl 5.11.0
(Reporter v0.033 / Smoker v0.040)




nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About