develooper Front page | perl.perl5.porters | Postings from November 2005

Re: Smoke [5.9.3] 26213 FAIL(M) linux 2.6.13-15-default [SuSE](i686/1 cpu)

From:
H.Merijn Brand
Date:
November 27, 2005 06:47
Subject:
Re: Smoke [5.9.3] 26213 FAIL(M) linux 2.6.13-15-default [SuSE](i686/1 cpu)
Message ID:
20051127154623.561ce232@pc09
On Sun, 27 Nov 2005 03:22 +0100, "H.Merijn Brand" <h.m.brand@xs4all.nl> wrote:

> Automated smoke report for 5.9.3 patch 26213
> pc09: Intel(R) Pentium(R) 4 CPU 1.70GHz (GenuineIntel 1695MHz) (i686/1 cpu)
>     on        linux - 2.6.13-15-default [SuSE]
>     using     cc version 4.0.2 20050901 (prerelease) (SUSE Linux)
>     smoketime 5 hours 1 minute (average 18 minutes 51 seconds)
> 
> Summary: FAIL(M)
> 
> O = OK  F = Failure(s), extended report at the bottom
> X = Failure(s) under TEST but not under harness
> ? = still running or test results not (yet) available
> Build failures during:       - = unknown or N/A
> c = Configure, m = make, M = make (after miniperl), t = make test-prep
> 
>    26213     Configuration (common) none
> ----------- ---------------------------------------------------------
> O O O O O O 
> O O O O O O -Duse64bitint
> M - - M - - -Duselongdouble
> M - - M - - -Dusemorebits

cc -L/pro/local/lib -o miniperl \
    miniperlmain.o opmini.o libperl.a -lnsl -ldl -lm -lcrypt -lutil -lc
./miniperl -w -Ilib -MExporter -e '<?>' || make minitest
/bin/sh: line 1: 26569 Segmentation fault      ./miniperl -w -Ilib -MExporter -e '<?>'
make[1]: Entering directory `/pro/3gl/CPAN/perl-current'
cp ext/re/re.pm lib/re.pm
make[2]: Entering directory `/pro/3gl/CPAN/perl-current'
./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm
make[2]: *** [lib/Config.pod] Segmentation fault
make[2]: Leaving directory `/pro/3gl/CPAN/perl-current'
make[1]: [minitest.prep] Error 2 (ignored)

You may see some irrelevant test failures if you have been unable
to build lib/Config.pm, lib/lib.pm or the Unicode data files.

cd t && (rm -f perl; /bin/ln -s ../miniperl perl) \
        &&  ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
/bin/sh: line 1: 26585 Segmentation fault      ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
make[1]: [minitest] Error 139 (ignored)
make[1]: Leaving directory `/pro/3gl/CPAN/perl-current'
./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm
make: *** [lib/Config.pod] Segmentation fault

pc09:/pro/3gl/CPAN/perl-current 114 > gdb miniperl
GNU gdb 6.2
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu"...Using host libthread_db library "/lib/tls/libthread_db.so.1".

(gdb) r -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm
Starting program: /pro/3gl/CPAN/perl-current/miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm

Program received signal SIGSEGV, Segmentation fault.
0x080b8d76 in Perl_sv_setpvn ()
(gdb) where
#0  0x080b8d76 in Perl_sv_setpvn ()
#1  0x080b8e04 in Perl_newSVpvn ()
#2  0x0809b852 in S_mess_alloc ()
#3  0x0809b8d1 in Perl_vmess ()
#4  0x0809ba5a in S_vdie_croak_common ()
#5  0x0809b1d2 in Perl_vcroak ()
#6  0x0809b2a9 in Perl_croak ()
#7  0x080b7408 in Perl_sv_upgrade ()
#8  0x080b8d80 in Perl_sv_setpvn ()
#9  0x080b8e04 in Perl_newSVpvn ()
#10 0x0809b852 in S_mess_alloc ()
#11 0x0809b8d1 in Perl_vmess ()
#12 0x0809ba5a in S_vdie_croak_common ()
#13 0x0809b1d2 in Perl_vcroak ()
#14 0x0809b2a9 in Perl_croak ()
#15 0x080b7408 in Perl_sv_upgrade ()
#16 0x080b8d80 in Perl_sv_setpvn ()
#17 0x080b8e04 in Perl_newSVpvn ()
#18 0x0809b852 in S_mess_alloc ()
#19 0x0809b8d1 in Perl_vmess ()
#20 0x0809ba5a in S_vdie_croak_common ()
#21 0x0809b1d2 in Perl_vcroak ()
#22 0x0809b2a9 in Perl_croak ()
#23 0x080b7408 in Perl_sv_upgrade ()
#24 0x080b8d80 in Perl_sv_setpvn ()
#25 0x080b8e04 in Perl_newSVpvn ()
#26 0x0809b852 in S_mess_alloc ()
#27 0x0809b8d1 in Perl_vmess ()
#28 0x0809ba5a in S_vdie_croak_common ()
#29 0x0809b1d2 in Perl_vcroak ()
#30 0x0809b2a9 in Perl_croak ()
#31 0x080b7408 in Perl_sv_upgrade ()
#32 0x080b8d80 in Perl_sv_setpvn ()
#33 0x080b8e04 in Perl_newSVpvn ()
#34 0x0809b852 in S_mess_alloc ()
#35 0x0809b8d1 in Perl_vmess ()
#36 0x0809ba5a in S_vdie_croak_common ()
#37 0x0809b1d2 in Perl_vcroak ()
#38 0x0809b2a9 in Perl_croak ()
#39 0x080b7408 in Perl_sv_upgrade ()
#40 0x080b8d80 in Perl_sv_setpvn ()
#41 0x080b8e04 in Perl_newSVpvn ()
#42 0x0809b852 in S_mess_alloc ()
#43 0x0809b8d1 in Perl_vmess ()
#44 0x0809ba5a in S_vdie_croak_common ()
#45 0x0809b1d2 in Perl_vcroak ()
#46 0x0809b2a9 in Perl_croak ()
#47 0x080b7408 in Perl_sv_upgrade ()
#48 0x080b8d80 in Perl_sv_setpvn ()
#49 0x080b8e04 in Perl_newSVpvn ()
#50 0x0809b852 in S_mess_alloc ()
#51 0x0809b8d1 in Perl_vmess ()
#52 0x0809ba5a in S_vdie_croak_common ()
#53 0x0809b1d2 in Perl_vcroak ()
#54 0x0809b2a9 in Perl_croak ()
#55 0x080b7408 in Perl_sv_upgrade ()
#56 0x080b8d80 in Perl_sv_setpvn ()
#57 0x080b8e04 in Perl_newSVpvn ()
#58 0x0809b852 in S_mess_alloc ()
#59 0x0809b8d1 in Perl_vmess ()
#60 0x0809ba5a in S_vdie_croak_common ()
#61 0x0809b1d2 in Perl_vcroak ()
#62 0x0809b2a9 in Perl_croak ()
#63 0x080b7408 in Perl_sv_upgrade ()
#64 0x080b8d80 in Perl_sv_setpvn ()
#65 0x080b8e04 in Perl_newSVpvn ()
#66 0x0809b852 in S_mess_alloc ()
#67 0x0809b8d1 in Perl_vmess ()
#68 0x0809ba5a in S_vdie_croak_common ()
#69 0x0809b1d2 in Perl_vcroak ()
#70 0x0809b2a9 in Perl_croak ()
#71 0x080b7408 in Perl_sv_upgrade ()
#72 0x080b8d80 in Perl_sv_setpvn ()
#73 0x080b8e04 in Perl_newSVpvn ()
#74 0x0809b852 in S_mess_alloc ()
#75 0x0809b8d1 in Perl_vmess ()
#76 0x0809ba5a in S_vdie_croak_common ()
#77 0x0809b1d2 in Perl_vcroak ()
#78 0x0809b2a9 in Perl_croak ()
#79 0x080b7408 in Perl_sv_upgrade ()
#80 0x080b8d80 in Perl_sv_setpvn ()
#81 0x080b8e04 in Perl_newSVpvn ()
#82 0x0809b852 in S_mess_alloc ()
#83 0x0809b8d1 in Perl_vmess ()
#84 0x0809ba5a in S_vdie_croak_common ()
#85 0x0809b1d2 in Perl_vcroak ()
#86 0x0809b2a9 in Perl_croak ()
#87 0x080b7408 in Perl_sv_upgrade ()
#88 0x080b8d80 in Perl_sv_setpvn ()
#89 0x080b8e04 in Perl_newSVpvn ()
#90 0x0809b852 in S_mess_alloc ()
#91 0x0809b8d1 in Perl_vmess ()
#92 0x0809ba5a in S_vdie_croak_common ()
#93 0x0809b1d2 in Perl_vcroak ()
#94 0x0809b2a9 in Perl_croak ()
#95 0x080b7408 in Perl_sv_upgrade ()
#96 0x080b8d80 in Perl_sv_setpvn ()
#97 0x080b8e04 in Perl_newSVpvn ()
#98 0x0809b852 in S_mess_alloc ()
#99 0x0809b8d1 in Perl_vmess ()
#100 0x0809ba5a in S_vdie_croak_common ()
#101 0x0809b1d2 in Perl_vcroak ()

I don't think I need to go on

-- 
H.Merijn Brand        Amsterdam Perl Mongers (http://amsterdam.pm.org/)
using Perl 5.6.2, 5.8.0, 5.8.5, & 5.9.2  on HP-UX 10.20, 11.00 & 11.11,
 AIX 4.3 & 5.2, SuSE 9.2 & 9.3, and Cygwin. http://www.cmve.net/~merijn
Smoking perl: http://www.test-smoke.org,    perl QA: http://qa.perl.org
 reports  to: smokers-reports@perl.org,                perl-qa@perl.org



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About