develooper Front page | perl.perl5.porters | Postings from February 2003

[MAINT] perl@18639

Thread Next
From:
Jarkko Hietaniemi
Date:
February 2, 2003 14:22
Subject:
[MAINT] perl@18639
Message ID:
20030202222156.GP2975@kosh.hut.fi
I felt it would be a good time for a maint snapshot.

	http://www.iki.fi/jhi/perl@18639.tgz
	http://www.iki.fi/jhi/perl@18639.tbz

Note that the above are the only places (well, of course besides the APC)
to get this snapshot.  There's no funet.fi snapshot or snapshot directory
for this.

Changes since the last:

____________________________________________________________________________
[ 18638] By: jhi                                   on 2003/02/02  20:26:13
        Log: Integrate:
             [ 18621]
             Fix and test for [perl #15549 Empty \Q\E not permitted]
             (test.pl-ise quotemeta.t, too)
             
             [ 18622]
             minitest wasn't working.  (The $^X /miniperl/ test in
             io/crlf.t didn't work in Tru64, $^X was "./perl", used
             the same 'eval q/use .../' trick everywhere.)
             
             [ 18624]
             Plan 9: doesn't really do Configure (undo #18585/#18586)
             
             [ 18626]
             Plan 9: No Configure.
             
             [ 18627]
             Plan 9: Update the list of object files.
             
             [ 18628]
             Plan 9: Update config.plan9 based on Russ Cox' work.
             
             [ 18629]
             Plan 9: Supply also Russ Cox' original config.h for 5.8.0.
             
             [ 18630]
             [perl #15397] seems to have been fixed; add its test.
             
             [ 18631]
             The [perl #7471] seems to have been fixed; add its test.
             
             [ 18632]
             Also [perl #3547] has been fixed; add its test case.
             
             [ 18633]
             Subject: [perl #18232] [PATCH] store PL_reg_match_utf8 in reganch
             From: Rafael Garcia-Suarez <rgarciasuarez@free.fr>
             Date: Wed, 22 Jan 2003 22:35:56 +0100
             Message-Id: <20030122223556.57d597a3.rgarciasuarez@free.fr>
             
             [ 18634]
             Subject: [PATCH] pod/perlfunc.pod
             From: abigail@abigail.nl
             Date: Sun, 2 Feb 2003 16:59:48 +0100
             Message-Id: <20030202155948.7971.qmail@abigail.nl>
             
             [ 18635]
             Plan 9: Add also config.sh sample for 5.8.0 from Russ Cox.
             
             [ 18636]
             Subject: Re: typo in checkin 18616
             From: Nick Ing-Simmons <nick@ing-simmons.net>
             Date: Sun, 02 Feb 2003 17:23:08 +0000
             Message-Id: <20030202172308.9244.1@bactrian.ni-s.u-net.com>
             
             [ 18637]
             Plan 9: Some time has passed.
     Branch: maint-5.8/perl
	  +> plan9/config_h.sample plan9/config_sh.sample
	  !> Configure MANIFEST XSUB.h mg.c plan9/buildinfo
	  !> plan9/config.plan9 plan9/mkfile pod/perlfunc.pod pp.c pp_ctl.c
	  !> pp_hot.c regexec.c regexp.h t/io/crlf.t t/op/pat.t
	  !> t/op/quotemeta.t t/uni/tr_7jis.t t/uni/tr_eucjp.t
	  !> t/uni/tr_sjis.t t/uni/tr_utf8.t toke.c
____________________________________________________________________________
[ 18619] By: jhi                                   on 2003/02/01  21:13:47
        Log: Integrate:
             [ 18618]
             Fix bug #15837, temporary from storable call hadn't gotten
             freed yet and was cloned but without a real (AvREAL)
             reference to it. @_ doesn't refcount!
     Branch: maint-5.8/perl
	  !> ext/threads/threads.xs
____________________________________________________________________________
[ 18617] By: jhi                                   on 2003/02/01  20:05:08
        Log: Integrate:
             [ 18616]
             Integrate from perlio:
             
             [ 18591]
             PERL_IMPLICIT_SYS does NOT vector PerlIO_xxx but PerlSIO_xxx, so
             correct XSUB.h 
             
             [ 18611]
             Michael Schroeder's fix for re-try if stdio ops after 
             interrupts. (Calls to PERL_ASYNC_CHECK added by NI-S).
             
             [ 18612]
             PerlIO friendly version of speed up of $/ = undef case.
             
             [ 18613]
             fflush() before invalidating stdio's fileno.
             
             [ 18615]
             Don't free thread before using it, breaks platforms that
             trust that I really want to free what I free, (like HPUX
             and AIX).
             
             [ 18614]
             Subject: Re: bleadperl: PerlIOStdio_invalidate_fileno breaks fclose semantics
             From: Nick Ing-Simmons <nick@ing-simmons.net>
             Date: Sat, 01 Feb 2003 13:03:52 +0000
             Message-Id: <20030201130352.1872.12@bactrian.ni-s.u-net.com>
             
             [ 18609]
             Go even further (back) than change #18608 and revert
             to the 5.8.0 code, since otherwise split.t #40 fails.
             The four new tests of pat.t should keep us more honest.
             
             [ 18608]
             Subject: [FIX] Re: UTF-8 failures (surprise!)
             From: Enache Adrian <enache@rdslink.ro>
             Date: Fri, 31 Jan 2003 09:20:59 +0200
             Message-ID: <20030131072059.GB6045@ratsnest.hole>
             
             [ 18607]
             Fix typo in version check ($[ to $]).
             
             [ 18606]
             Subject: [PATCH] Upper<->Lower case mistake in perlunicode.pod ?
             From: Jose.auguste-etienne@cgss-guyane.fr
             Date: Thu, 30 Jan 2003 12:40:53 -0300
             Message-ID: <OF8E7C1B73.22FEA7CE-ON03256CBE.00528AB8@Cgss-Guyane.fr>
             
             [ 18605]
             [perl #20616] code example in the FAQ that isn't strict-friendly.
             Subject: [perl #20616] Tie::IxHash doc error.
             From: Beckett Richard-qswi266 (via RT) <perlbug-followup@perl.org>
             Date: 30 Jan 2003 11:43:17 -0000
             Message-Id: <rt-20616-49904.16.891027432675@bugs6.perl.org>
             
             [ 18604]
             FAQ sync.
             
             [ 18603]
             Subject: [FIX] Re: UTF-8 failures (surprise!)
             From: Enache Adrian <enache@rdslink.ro>
             Date: Thu, 30 Jan 2003 10:48:09 +0200
             Message-ID: <20030130084809.GA16902@ratsnest.hole>
             
             Fix for half of the failures, with an expanded test.
             
             [ 18602]
             Updates to the openbsd hints
             
             Subject: [perl #20606] [no subject]
             Date: 29 Jan 2003 18:38:37 -0000
             From: "Todd C. Miller" (via RT) <perlbug-followup@perl.org>
             Message-Id: <rt-20606-49879.4.78874436094841@bugs6.perl.org>
             
             [ 18599]
             Fix a very small memory leak in op_free, by reserving the
             case op_seq == (U16)-1 for the compiler backend
             
             Subject: Re: Freeing code
             From: "Paul Johnson" <paul@pjcj.net>
             Date: Tue, 28 Jan 2003 14:13:09 +0100 (CET)
             Message-ID: <18918.193.134.254.145.1043759589.squirrel@wesley.pjcj.net>
             
             [ 18597]
             Subject: Re: [perl #20274] perlbug requires dynamic loading
             From: Slaven Rezic <slaven@rezic.de>
             Date: 14 Jan 2003 20:58:54 +0100
             Message-ID: <87n0m3v6yp.fsf@vran.herceg.de>
             
             [ 18596]
             Introduce the PUSHSUB_DB macro, equivalent to PUSHSUB, but
             without the lval context tweak. Used in OP_DBSTATE.
             Subject: Re: [PATCH] Re: change #9754: 5 x slowdown for perl -d
             From: Dave Mitchell <davem@fdgroup.com>
             Date: Sun, 26 Jan 2003 17:42:42 +0000
             Message-ID: <20030126174242.H16182@fdgroup.com>
             
             [ 18594]
             Update the pod list for Plan 9.
             
             [ 18593]
             When we copy things out of a hash and increment the 
             refcount of the shared scalar, we really must protect
             that refcount increase with a lock, or else it might not
             happen. Fixes segfault when objects would prematurely
             be killed.
             
             [ 18588]
             Lest people get worried about not having PerlIO.
     Branch: maint-5.8/perl
	  !> XSUB.h cop.h ext/Storable/t/restrict.t
	  !> ext/Sys/Hostname/Hostname.pm ext/threads/shared/shared.xs
	  !> ext/threads/threads.xs hints/openbsd.sh lib/utf8.t op.c
	  !> perlio.c plan9/mkfile pod/perlfaq.pod pod/perlfaq2.pod
	  !> pod/perlfaq3.pod pod/perlfaq4.pod pod/perlfaq5.pod
	  !> pod/perlfaq7.pod pod/perlfaq8.pod pod/perlunicode.pod
	  !> pod/perluniintro.pod pp_ctl.c regexec.c sv.c t/op/pat.t
____________________________________________________________________________
[ 18590] By: jhi                                   on 2003/01/26  13:21:03
        Log: Integrate:
             [ 18589]
             OPf_SPECIAL on OP_DBSTATE now indicates a breakpoint.
             
             Subject: Re: [PATCH] Re: change #9754: 5 x slowdown for perl -d
             From: Dave Mitchell <davem@fdgroup.com>
             Date: Fri, 24 Jan 2003 18:44:19 +0000
             Message-ID: <20030124184419.F11179@fdgroup.com>
     Branch: maint-5.8/perl
	  !> mg.c op.h pp_ctl.c
____________________________________________________________________________
[ 18587] By: jhi                                   on 2003/01/26  09:29:52
        Log: Integrate:
             [ 18583]
             Plan 9 compiler can't return quads from the ?: (condop).
             (There may be more spots like this, so a Configure test
             maybe in order, but this works for now.)  From Russ Cox.
             
             [ 18584]
             Plan 9 doesn't really have the symlink API, from Russ Cox.
             
             [ 18586]
             Plan 9 doesn't do nm, from Russ Cox.
     Branch: maint-5.8/perl
	  !> Configure ext/PerlIO/via/via.xs plan9/plan9ish.h
____________________________________________________________________________
[ 18582] By: jhi                                   on 2003/01/26  08:30:37
        Log: Integrate:
             [ 18579]
             Subject: Re: [perl #20408] SV's SvPVX get freed even when its SvLEN is zero
             From: Enache Adrian <enache@rdslink.ro>
             Date: Sun, 26 Jan 2003 04:55:48 +0200
             Message-Id: <20030126025548.GB812@ratsnest.hole>
             
             [ 18580]
             Subject: patch to speed up Perl's slurp mode
             From: Enache Adrian <enache@rdslink.ro>
             Date: Fri, 24 Jan 2003 06:23:54 +0200
             Message-Id: <20030124042354.GA30362@ratsnest.hole>
             
             [ 18581]
             Subject: Re: truncate using a globref
             From: Slaven Rezic <slaven@rezic.de>
             Date: Thu, 23 Jan 2003 15:48:52 +0100 (CET)
             Message-Id: <200301231448.h0NEmqnu022591@vran.herceg.de>
     Branch: maint-5.8/perl
	   ! sv.c
	  !> ext/Storable/Storable.xs pp_ctl.c pp_sys.c t/io/fs.t
____________________________________________________________________________
[ 18576] By: jhi                                   on 2003/01/23  13:52:39
        Log: The perlio->maint changes had somehow gotten of sync.
     Branch: maint-5.8/perl
	  !> perlio.c
____________________________________________________________________________
[ 18575] By: jhi                                   on 2003/01/23  12:33:38
        Log: Integrate:
             [ 18569]
             Fix [perl #19860] by adding a POSIX::fsync() stub.
     Branch: maint-5.8/perl
	  !> ext/POSIX/POSIX.pm ext/POSIX/POSIX.pod
____________________________________________________________________________
[ 18574] By: jhi                                   on 2003/01/23  12:28:19
        Log: Integrate:
             [ 18573]
             Fix Solaris 32-bit invalidate case.
     Branch: maint-5.8/perl
	  !> perlio.c
____________________________________________________________________________
[ 18568] By: jhi                                   on 2003/01/22  20:24:37
        Log: Add the POSIX::sigaction() trick by Slaven Rezic
             for [perl #17341].
     Branch: maint-5.8/perl
	   ! pod/perlfunc.pod pod/perlipc.pod
____________________________________________________________________________
[ 18567] By: jhi                                   on 2003/01/22  18:37:55
        Log: Integrate:
             [ 18545]
             Subject: [PATCH perl-current] AUTHORS correction
             From: Richard Soderberg <rs@crystalflame.net>
             Date: Wed, 22 Jan 2003 02:08:13 -0500
             Message-Id: <45B4D3AE-2DD8-11D7-8CF9-000393801F84@crystalflame.net>
             
             [ 18552]
             Subject: [PATCH] assert PV isn't RV
             From: Nicholas Clark <nick@unfortu.net>
             Date: Fri, 17 Jan 2003 19:40:45 +0000
             Message-ID: <20030117194044.GB297@Bagpuss.unfortu.net>
             
             [ 18553]
             Subject: Term::Complete problem + fix (Was: Re: muttprofile + perl 5.8)
             From: Martti Rahkila <martti.rahkila@hut.fi>
             Date: Sat, 18 Jan 2003 00:25:39 +0200
             Message-ID: <20030118002539.A30585@wurlitzer.hut.fi>
             
             (chose the 'even safer' version)
             
             [ 18554]
             Subject: [PATCH av.c] Re: [perl #15439] unreferenced scalar due to double DESTROY
             From: Dave Mitchell <davem@fdgroup.com>
             Date: Sun, 19 Jan 2003 16:43:54 +0000
             Message-ID: <20030119164353.B24444@fdgroup.com>
             
             [ 18556]
             Subject: [PATCH perlio.h] (was RE: [PATCH] %_ (was Re: [PATCH] operation on `PL_na' may be undefined))
             From: Robin Barker <Robin.Barker@npl.co.uk>
             Date: Mon, 20 Jan 2003 15:26:21 -0000
             Message-ID: <533D273D4014D411AB1D00062938C4D904046299@hotel.npl.co.uk>
             
             [ 18559]
             Upgrade to Encode 1.86.
     Branch: maint-5.8/perl
	  !> AUTHORS av.c dump.c ext/Encode/Changes ext/Encode/Encode.pm
	  !> ext/Encode/MANIFEST ext/Encode/Unicode/Unicode.xs
	  !> ext/Encode/encoding.pm ext/Encode/t/enc_eucjp.t
	  !> ext/Encode/t/enc_utf8.t lib/Term/Complete.pm perlio.h sv.h
	  !> t/op/array.t
____________________________________________________________________________
[ 18566] By: jhi                                   on 2003/01/22  18:32:41
        Log: Regen Configure.
     Branch: maint-5.8/perl
	   ! Configure config_h.SH
____________________________________________________________________________
[ 18565] By: jhi                                   on 2003/01/22  18:15:06
        Log: Integrate from perlio:
             [ 18539]
             Try the invalidate_fileno() idea for non-leaky stdio sockets.
             
             [ 18540]
             stdio does NOT set errno==EBADF on invalidated fileno
             
             [ 18547]
             Tweak APItest for new semantics of printf.
             Now printf() is always real printf() and not #define'd to 
             PerlIO_stdoutf() so PerlIO_flush() when STDOUT is redirected 
             back to original file does not affect stdout unless we are 
             using :stdio as implementation. So things printf()ed XS side 
             are not written to file (and turn up at end of test).
             So add an XS function which does fflush(stdout), modify .pm
             file to export it and .t file to call it.
             
             [ 18548]
             Add defined(__osf__) case to invalidate_fileno (for Tru64).
             
             [ 18549]
             Report layer name (without arg) on fail, and attempt to 
             autoload layer name. (Fix for [perl #20460]).
             
             [ 18550]
             #if defined(__irix__) (for stdio invalidate) from Jarkko.
             
             [ 18560]
             Fixes for open.pm which attempts to load layers:
             1. C equivalent of local $SIG{__WARN__} = sub {} 
             while loading layers to supress warnings lib/open.t does
             not want.
             2. The loading scheme does not recurse now so look for 
             new symptom of bad layer which is that a good module 
             fails to load (as we cannot open any files).
             
             NOTE: In my opinion open.pm should probably die on bad layer
             spec rather than just (maybe) warning and then allowing opens
             to fail.
     Branch: maint-5.8/perl
	  !> ext/XS/APItest/APItest.pm ext/XS/APItest/APItest.xs
	  !> ext/XS/APItest/t/printf.t lib/open.pm lib/open.t perlio.c
____________________________________________________________________________
[ 18564] By: jhi                                   on 2003/01/22  18:07:19
        Log: Use the aTHX_-less form (cousin of change #18544).
     Branch: maint-5.8/perl
	   ! sv.c
____________________________________________________________________________
[ 18563] By: jhi                                   on 2003/01/22  18:03:40
        Log: Integrate:
             [ 18541]
             Try to make including patchlevel.h a bit more
             robust (use <> instead of "") and in case of
             failure (PERL_VERSION didn't get defined) try
             to fail (by trying to #include an "obviously"
             named file that should not exist) (didn't use
             #error since IIRC older cpps do not have it)
             (Tries to address [perl #20276].)
             
             [ 18543]
             Update the MD5 checksums.
     Branch: maint-5.8/perl
	  !> ext/Data/Dumper/Dumper.xs ext/Devel/PPPort/PPPort.pm
	  !> ext/Digest/MD5/MD5.xs ext/Digest/MD5/t/files.t
	  !> ext/List/Util/Util.xs ext/Storable/Storable.xs
____________________________________________________________________________
[ 18562] By: jhi                                   on 2003/01/22  17:59:44
        Log: Integrate:
             [ 18536]
             Allow explicit -C enable/disable by -C:1/-C:0
             (suggested by Peter Haworth).
             
             (accept mainline's perlrun since somehow maint has gotten of sync)
     Branch: maint-5.8/perl
	  !> perl.c pod/perlrun.pod
____________________________________________________________________________
[ 18535] By: jhi                                   on 2003/01/21  02:49:55
        Log: Integrate:
             [ 18526]
             Subject: Re: When Storable and Devel::DProf mix, core dump [perl #19385]
             From: Blair Zajac <blair@orcaware.com>
             Date: Wed, 08 Jan 2003 12:28:35 -0800
             Message-ID: <3E1C89F3.2B4759C@orcaware.com>
             
             [ 18527]
             Subject: perl version reporting
             From: "H.Merijn Brand" <h.m.brand@hccnet.nl>
             Date: Wed, 18 Dec 2002 08:30:32 +0100
             Message-Id: <20021218081957.ABD8.H.M.BRAND@hccnet.nl>
             
             [ 18532]
             Subject: Re: [perl #19236] perlsyn: implicit localisation in while()
             From: Martien Verbruggen <mgjv@tradingpost.com.au>
             Date: Tue, 31 Dec 2002 16:42:28 +1100
             Message-Id: <slrnb12bi4.4tt.mgjv@martien.heliotrope.home>
             
             [ 18533]
             Subject: Re: [perl #17757] s///g fails when using English & study in 5.8.0
             From: hv@crypt.org
             Date: Thu, 02 Jan 2003 14:33:49 +0000
             Message-Id: <200301021433.h02EXno03562@crypt.compulink.co.uk>
             
             [ 18534]
             Subject: PATCH: perldoc in MAINT branch (probably unstable too)
             From: Chip Turner <cturner@redhat.com>
             Date: 02 Jan 2003 11:35:57 -0500
             Message-ID: <vzksmwb8q6q.fsf@minbar.devel.redhat.com>
     Branch: maint-5.8/perl
	  !> ext/Devel/DProf/Changes ext/Devel/DProf/DProf.pm
	  !> ext/Devel/DProf/DProf.xs ext/Devel/DProf/Makefile.PL
	  !> lib/Pod/Perldoc.pm perl.c pod/perlsyn.pod regexec.c
	  !> t/op/subst.t
____________________________________________________________________________
[ 18525] By: jhi                                   on 2003/01/20  17:54:12
        Log: Integrate:
             [ 18516]
             microperl update.
             
             [ 18519]
             Encode MANIFEST update.
             
             [ 18521]
             Retract #18154 (integrate of perlio #18507), not enough
             threadsafety.
             
             [ 18522]
             Subject: [perl #20408] SV's SvPVX get freed even when its SvLEN is zero
             From: "enache@rdslink.ro (via RT)" <perlbug-followup@perl.org>
             Date: 20 Jan 2003 01:54:07 -0000
             Message-Id: <rt-20408-49009.18.2567818321236@bugs6.perl.org>
             
             [ 18523]
             Upgrade to Digest 1.02.
             
             [ 18524]
             Integrate from perlio:
             [ 18520]
             Move #define printf out of perl.h into appropriate 
             PerlIO files.
     Branch: maint-5.8/perl
	  !> Makefile.micro ext/Encode/MANIFEST fakesdio.h lib/Digest.pm
	  !> lib/Digest.t nostdio.h perl.h perlio.c pp_hot.c uconfig.h
	  !> uconfig.sh
____________________________________________________________________________
[ 18515] By: jhi                                   on 2003/01/18  18:43:52
        Log: Integrate:
             [ 18474]
             Integrate from perlio:
             [ 18470]
             Fix #16306 and #16880
             
             (#16306 Big Badda leak in Sockets)
             (#16880 Memory leak with IO::Socket in Perl v5.8.0)
             
             [ 18475]
             Integrate from perlio:
             [ 18471]
             Fix #18711 and add test for it (and indeed tell on write
             handles at all !
             
             (#18711 Serious bug of tell() in perl)
             
             [ 18507]
             Thread-protection for dup/fclose/dup2 scheme of stdio leak
             avoidance.
             
             [ 18508]
             Subject: Re: 18457 on cygwin/20030113
             From: Nick Ing-Simmons <nick.ing-simmons@elixent.com>
             Date: Fri, 17 Jan 2003 15:10:34 +0000
             Message-Id: <20030117151034.2651.3@bactrian.elixent.com>
             
             [ 18509]
             Upgrade to Digest::MD5 2.22.
             
             [ 18510]
             Typo fixes from jmc@prioris.mini.pw.edu.pl (from openbsd.bugs)
             
             [ 18511]
             Upgrade to Digest 1.01.
             
             [ 18512]
             EPOC perl address updates.
             
             [ 18513]
             Slight pod reformatting based on [perl #20284].
             
             [ 18514]
             Integrate from perlio:
             [ 18507]
             Thread-protection for dup/fclose/dup2 scheme of stdio leak
             avoidance.
     Branch: maint-5.8/perl
	  !> README.epoc README.mint ext/Data/Dumper/Dumper.pm
	  !> ext/Digest/MD5/Changes ext/Digest/MD5/MD5.pm
	  !> ext/Digest/MD5/MD5.xs ext/Digest/MD5/README
	  !> ext/Digest/MD5/t/files.t lib/Digest.pm perlio.c t/io/tell.t
	  !> utils/libnetcfg.PL
____________________________________________________________________________
[ 18503] By: jhi                                   on 2003/01/16  23:29:57
        Log: Integrate:
             [ 18478]
             Upgrade to Encode 1.84.
             
             [ 18479]
             Add a test for encoding 'utf8'.
             
             [ 18480]
             Encode 1.84 broke the subtest #7, further study required.
             
             [ 18481]
             Apparently some stdios have bugs (no! don't tell it is so!)
             or there is a corner of stdio that is substandardised.
             
             [ 18483]
             Detypo.
             
             [ 18484]
             Upgrade to Time::HiRes 1.42.
             
             [ 18486]
             isa() and can() didn't work on magic variables
             see Message-Id: <20030114220737.2190ba7c.rgarciasuarez@free.fr>
             plus a test case by B. Goldberg
             
             [ 18487]
             Add a test case for bug [perl #19545]
             
             [ 18488]
             Subject: [PATCH 5.8.0] diagnostics.pm: useful apropos description for splain
             From: Brendan O'Dea <bod@debian.org>
             Date: Sun, 12 Jan 2003 06:17:30 +1100
             Message-ID: <20030111191730.GA19420@londo.c47.org>
             
             [ 18489]
             Subject: [PATCH 5.8.0] perlrun.pod: fix -i examples
             From: Brendan O'Dea <bod@debian.org>
             Date: Sun, 12 Jan 2003 06:18:32 +1100
             Message-ID: <20030111191832.GA19441@londo.c47.org>
             
             [ 18490]
             Make the locale-induced UTF-8-ification of STD fhs
             and the default file open layer explicit (either -C
             or PERL_UTF8_LOCALE), instead of implicit (and unasked-for).
             
             [ 18491]
             if (0) the PL_widesyscalls code for now: Sarathy
             should take another look to see whether it is really
             safe to remove the code, too.
             
             [ 18492]
             Subject: Update for ext/Digest/MD5/
             From: Gisle Aas <gisle@ActiveState.com>
             Date: 30 Dec 2002 07:38:16 -0800
             Message-ID: <lrd6njzfdj.fsf@caliper.activestate.com>
             
             [ 18493]
             Subject: Update for ext/MIME/Base64/
             From: Gisle Aas <gisle@ActiveState.com>
             Date: 30 Dec 2002 07:34:34 -0800
             Message-ID: <lrhecvzfjp.fsf@caliper.activestate.com>
             
             [ 18494]
             Upgrade to CGI.pm 2.89.
             
             [ 18495]
             It seems the binmode() is needed with UTF-8 locales enabled.
             
             [ 18496]
             Fix 'use encoding' I/O for code points 0x80..0xFF;
             code changes from Inaba Hiroto; test tweaks by jhi.
             
             [ 18501]
             Subject: Re: [perl #19977] unlocalized $_ in File::Find clobbers upstream $_
             From: "Jos I. Boumans" <kane@dwim.org>
             Date: Thu, 16 Jan 2003 14:04:48 +0100
             Message-ID: <3E26ADF0.6010605@dwim.org>
             (with test tweaks)
             
             [ 18502]
             Integrate from maint-5.6:
             [ 18477]
             search utility doesn't skip exe/lib/pdb files properly on windows
     Branch: maint-5.8/perl
	  +> ext/Encode/t/enc_eucjp.t ext/Encode/t/enc_utf8.t
	  !> (integrate 57 files)
____________________________________________________________________________
[ 18466] By: jhi                                   on 2003/01/09  14:07:25
        Log: Integrate:
             [ 18459]
             PerlFAQ sync.
             
             [ 18465]
             Fix the doc for splitpath() in the File::Spec modules :
             this function doesn't return undef in any case.
     Branch: maint-5.8/perl
	  !> lib/File/Spec.pm lib/File/Spec/Mac.pm lib/File/Spec/OS2.pm
	  !> lib/File/Spec/Unix.pm lib/File/Spec/Win32.pm pod/perlfaq.pod
	  !> pod/perlfaq1.pod pod/perlfaq2.pod pod/perlfaq3.pod
	  !> pod/perlfaq4.pod pod/perlfaq5.pod pod/perlfaq6.pod
	  !> pod/perlfaq7.pod pod/perlfaq8.pod pod/perlfaq9.pod
____________________________________________________________________________
[ 18458] By: jhi                                   on 2003/01/08  19:43:26
        Log: Integrate:
             [ 18438]
             Subject: Re: [PATCH] Tiny nits in perlre.pod
             From: andreas.koenig@anima.de (Andreas J. Koenig)
             Date: Fri, 03 Jan 2003 00:57:15 +0100
             Message-ID: <m33cob14x0.fsf@k242.linux.bogus>
             
             [ 18439]
             Subject: [PATCH] [perl #15184] ExtUtils/t/Embed.t fails with -Duseshrplib -Dlibperl=...
             From: Rafael Garcia-Suarez <rgarciasuarez@free.fr>
             Date: Fri, 13 Dec 2002 00:54:43 +0100
             Message-Id: <20021213005443.3077a229.rgarciasuarez@free.fr>
             Same as change 18403 for maint-5.8 branch
             
             [ 18441]
             Subject: [DOCPATCH] File::Copy's synopsis
             From: Nicholas Clark <nick@unfortu.net>
             Date: Wed, 1 Jan 2003 21:09:30 +0000
             Message-ID: <20030101210930.GE296@Bagpuss.unfortu.net>
             
             [ 18451]
             Subject: [PATCH perl@18746] VMS test adjustments
             Date: Sat, 04 Jan 2003 11:26:00 -0600
             From: "Craig A. Berry" <craigberry@mac.com>
             Message-ID: <3E171928.1040100@mac.com>
             
             [ 18453]
             Change the value of ${^TAINT} : 0 without taint checks,
             1 with -T, and -1 with -t or -TU.
             
             [ 18454]
             Integrate podlators-1.25
             
             [ 18455]
             Subject: [PATCH] integrate more with report_evil_fh
             From: Nicholas Clark <nick@unfortu.net>
             Date: Thu, 26 Dec 2002 20:56:21 +0000
             Message-ID: <20021226205620.GA16584@Bagpuss.unfortu.net>
     Branch: maint-5.8/perl
	  !> ext/Devel/Peek/Peek.t ext/Filter/t/call.t
	  !> lib/ExtUtils/t/Embed.t lib/File/Copy.pm lib/Pod/Man.pm
	  !> lib/Pod/t/man.t lib/charnames.t mg.c pod/perlre.pod
	  !> pod/perlvar.pod pp_sys.c t/op/taint.t t/run/runenv.t
	  !> t/run/switchI.t t/run/switcht.t
____________________________________________________________________________
[ 18457] By: jhi                                   on 2003/01/08  01:47:02
        Log: Upgrade to Time::HiRes 1.42.
     Branch: maint-5.8/perl
	   + ext/Time/HiRes/fallback/const-c.inc
	   + ext/Time/HiRes/fallback/const-xs.inc
	   ! MANIFEST ext/Time/HiRes/Changes ext/Time/HiRes/HiRes.pm
	   ! ext/Time/HiRes/HiRes.xs ext/Time/HiRes/Makefile.PL
____________________________________________________________________________
[ 18452] By: jhi                                   on 2003/01/06  13:47:59
        Log: Regen Configure.
     Branch: maint-5.8/perl
	   ! Configure
____________________________________________________________________________
[ 18450] By: jhi                                   on 2003/01/06  04:44:28
        Log: Tiny output tweak.
     Branch: maint-5.8/perl
	   ! t/op/pat.t
____________________________________________________________________________
[ 18449] By: jhi                                   on 2003/01/05  16:12:26
        Log: Update Changes.
     Branch: maint-5.8/perl
	   ! Changes patchlevel.h
____________________________________________________________________________

-- 
Jarkko Hietaniemi <jhi@iki.fi> http://www.iki.fi/jhi/ "There is this special
biologist word we use for 'stable'.  It is 'dead'." -- Jack Cohen

Thread Next


nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About