develooper Front page | perl.perl5.porters | Postings from March 2000

[ID 20000310.002] Not OK: Perl 5.6.0-RC1 on MSWin32-x86 (MSVC)

From:
Moore, Paul
Date:
March 10, 2000 02:58
Subject:
[ID 20000310.002] Not OK: Perl 5.6.0-RC1 on MSWin32-x86 (MSVC)
Message ID:
714DFA46B9BBD0119CD000805FC1F53BDC3A21@UKRUX002.rundc.uk.origin-it.com
The build failed, with a link error trying to build perl56.dll (unresolved
external Perl_load_module_nocontext). Attached is a snapshot of the error,
plus my Makefile.

Paul Moore.

---- Error messages ----

C:\Data\Perl\perl-5.6.0-RC1\win32\dl_win32.xs =>
C:\Data\Perl\perl-5.6.0-RC1\ext\DynaLoader\dl_win32.xs
     1 file copied
        if not exist ..\lib\auto mkdir ..\lib\auto
        cd ..\ext\DynaLoader
        ..\..\miniperl.exe -I..\..\lib DynaLoader_pm.PL
        ..\..\miniperl.exe -I..\..\lib XSLoader_pm.PL
        cd ..\..\win32
        xcopy /f /r /i /d ..\ext\DynaLoader\DynaLoader.pm ..\lib\
C:\Data\Perl\perl-5.6.0-RC1\ext\DynaLoader\DynaLoader.pm ->
C:\Data\Perl\perl-5.6.0-RC1\lib\DynaLoader.pm
1 File(s) copied
        xcopy /f /r /i /d ..\ext\DynaLoader\XSLoader.pm ..\lib\
C:\Data\Perl\perl-5.6.0-RC1\ext\DynaLoader\XSLoader.pm ->
C:\Data\Perl\perl-5.6.0-RC1\lib\XSLoader.pm
1 File(s) copied
        cd ..\ext\DynaLoader
        ..\..\miniperl.exe -I..\..\lib ..\..\lib\ExtUtils\xsubpp  -C++
-prototypes dl_win32.xs > DynaLoader.c
        cd ..\..\win32
        cl -c -I..\ext\DynaLoader -nologo -Gf -W3 -I..\lib\CORE -I.\include
-I.
-I.. -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DPERLDLL -DPERL_CORE
-O
1 -MD -DNDEBUG  -DPERL_MSVCRT_READFIX -Fo..\ext\DynaLoader\DynaLoader.obj
..\ext
\DynaLoader\DynaLoader.c
DynaLoader.c
        link -dll -def:perldll.def -out:..\perl56.dll @C:\TEMP\nmb00282.
perldll.def : error LNK2001: unresolved external symbol
Perl_load_module_nocontext
..\perl56.lib : fatal error LNK1120: 1 unresolved externals
LINK : fatal error LNK1141: failure during build of exports file
NMAKE : fatal error U1077: 'link' : return code '0x475'
Stop.

---- Makefile ----

#
# Makefile to build perl on Windows NT using Microsoft NMAKE.
#
# This is set up to build a perl.exe that runs off a shared library
# (perl.dll).  Also makes individual DLLs for the XS extensions.
#

##
## Make sure you read README.win32 *before* you mess with anything here!
##

##
## Build configuration.  Edit the values below to suit your needs.
##

#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
#
INST_DRV	= C:
INST_TOP	= $(INST_DRV)\Applications\DevPerl

#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location.  Leaving it enabled is
# the safest route, as perl adds the extra version directory to all the
# locations it installs files to.  If you disable it, an alternative
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
#INST_VER	= \5.6.0

#
# Comment this out if you DON'T want your perl installation to have
# architecture specific components.  This means that architecture-
# specific files will be installed along with the architecture-neutral
# files.  Leaving it enabled is safer and more flexible, in case you
# want to build multiple flavors of perl and install them together in
# the same location.  Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
INST_ARCH	= \$(ARCHNAME)

#
# uncomment to enable multiple interpreters.  This is need for fork()
# emulation.
#
#USE_MULTI	= define

#
# XXX WARNING! This option is still very experimental.  May be broken.
#
# Beginnings of interpreter cloning/threads; still very incomplete.
# This should be enabled to get the fork() emulation.  This needs
# USE_MULTI as well.
#
#USE_ITHREADS	= define

#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl.  This needs USE_MULTI above.  This is also needed to
# get fork().
#
#USE_IMP_SYS	= define

#
# WARNING! This option is deprecated and will eventually go away (enable
# USE_ITHREADS instead).
#
# uncomment to enable threads-capabilities.  This is incompatible with
# USE_ITHREADS, and is only here for people who may have come to rely
# on the experimental Thread support that was in 5.005.
#
#USE_5005THREADS= define

#
# WARNING! This option is deprecated and will eventually go away (enable
# USE_MULTI instead).
#
# uncomment next line if you want to use the PERL_OBJECT build option.
# DO NOT ENABLE unless you have legacy code that relies on the C++
# CPerlObj class that was available in 5.005.  This cannot be enabled
# if you ask for USE_5005THREADS above.
#
#USE_OBJECT	= define

#
# uncomment one of the following lines if you are using either
# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
#
#CCTYPE		= MSVC20
CCTYPE		= MSVC60

#
# uncomment next line if you want debug version of perl (big,slow)
#
#CFG		= Debug

#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
# Not recommended if you have VC 6.x and you're not running Windows 9x.
#
#USE_PERLCRT	= define

#
# uncomment to enable linking with setargv.obj under the Visual C
# compiler. Setting this options enables perl to expand wildcards in
# arguments, but it may be harder to use alternate methods like
# File::DosGlob that are more powerful.  This option is supported only with
# Visual C.
#
#USE_SETARGV	= define

#
# if you have the source for des_fcrypt(), uncomment this and make sure the
# file exists (see README.win32).  File should be located in the same
# directory as this file.
#
#CRYPT_SRC	= fcrypt.c

#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment this, and make sure the library exists (see
README.win32)
# Specify the full pathname of the library.
#
CRYPT_LIB	= C:\LOCAL\Lib\MD\libdes.lib

#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with
extensions
# you may have compiled with/without it.  Be prepared to recompile all
# extensions if you change the default.  Currently, this cannot be enabled
# if you ask for USE_IMP_SYS above.
#
#PERL_MALLOC	= define

#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
# so you may have to set CCHOME explicitly (spaces in the path name should
# not be quoted)
#
#CCHOME		= f:\msvc20
CCHOME		= C:\VisualStudio\VC98
CCINCDIR	= $(CCHOME)\include
CCLIBDIR	= $(CCHOME)\lib

#
# Additional compiler flags can be specified here.
#

#
# This should normally be disabled.  Adding -DPERL_POLLUTE enables support
# for old symbols by default, at the expense of extreme pollution.  You most
# probably just want to build modules that won't compile with
#         perl Makefile.PL POLLUTE=1
# instead of enabling this.  Please report such modules to the respective
# authors.
#
#BUILDOPT	= $(BUILDOPT) -DPERL_POLLUTE

#
# This should normally be disabled.  Enabling it will disable the File::Glob
# implementation of CORE::glob.
#
#BUILDOPT	= $(BUILDOPT) -DPERL_EXTERNAL_GLOB

#
# This should normally be disabled.  Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
#BUILDOPT	= $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS

#
# This should normally be disabled.  Enabling it runs a cloned toplevel
# interpreter (*EXPERIMENTAL*, fails tests)
#BUILDOPT	= $(BUILDOPT) -DTOP_CLONE

#
# specify semicolon-separated list of extra directories that modules will
# look for libraries (spaces in path names need not be quoted)
#
EXTRALIBDIRS	=

#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
#
EMAIL		= gustav@morpheus.demon.co.uk

##
## Build configuration ends.
##

##################### CHANGE THESE ONLY IF YOU MUST #####################

!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
D_CRYPT		= undef
!ELSE
D_CRYPT		= define
CRYPT_FLAG	= -DHAVE_DES_FCRYPT
!ENDIF

!IF "$(USE_OBJECT)" == "define"
PERL_MALLOC	= undef
USE_5005THREADS	= undef
USE_MULTI	= undef
USE_IMP_SYS	= define
!ENDIF

!IF "$(PERL_MALLOC)" == ""
PERL_MALLOC	= undef
!ENDIF

!IF "$(USE_5005THREADS)" == ""
USE_5005THREADS	= undef
!ENDIF

!IF "$(USE_5005THREADS)" == "define"
USE_ITHREADS	= undef
!ENDIF

!IF "$(USE_IMP_SYS)" == "define"
PERL_MALLOC	= undef
!ENDIF

!IF "$(USE_MULTI)" == ""
USE_MULTI	= undef
!ENDIF

!IF "$(USE_OBJECT)" == ""
USE_OBJECT	= undef
!ENDIF

!IF "$(USE_ITHREADS)" == ""
USE_ITHREADS	= undef
!ENDIF

!IF "$(USE_IMP_SYS)" == ""
USE_IMP_SYS	= undef
!ENDIF

!IF "$(USE_PERLCRT)" == ""
USE_PERLCRT	= undef
!ENDIF

!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" ==
"defineundefundefundef"
USE_MULTI	= define
!ENDIF

!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
USE_MULTI	= define
USE_5005THREADS	= undef
!ENDIF

!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
!ENDIF

!IF "$(USE_IMP_SYS)" != "undef"
BUILDOPT	= $(BUILDOPT) -DPERL_IMPLICIT_SYS
!ENDIF

!IF "$(PROCESSOR_ARCHITECTURE)" == ""
PROCESSOR_ARCHITECTURE	= x86
!ENDIF

!IF "$(USE_OBJECT)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-object
!ELSE
!IF "$(USE_5005THREADS)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
!IF "$(USE_MULTI)" == "define"
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
!ELSE
ARCHNAME	= MSWin32-$(PROCESSOR_ARCHITECTURE)
!ENDIF
!ENDIF
!ENDIF

!IF "$(USE_ITHREADS)" == "define"
ARCHNAME	= $(ARCHNAME)-thread
!ENDIF

# Visual Studio 98 specific
!IF "$(CCTYPE)" == "MSVC60"

# VC 6.0 can load the socket dll on demand.  Makes the test suite
# run in about 10% less time.
DELAYLOAD	= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib


# VC 6.0 seems capable of compiling perl correctly with optimizations
# enabled.  Anything earlier fails tests.
!IF "$(CFG)" == ""
CFG		= Optimize
!ENDIF
!ENDIF

ARCHDIR		= ..\lib\$(ARCHNAME)
COREDIR		= ..\lib\CORE
AUTODIR		= ..\lib\auto
LIBDIR		= ..\lib
EXTDIR		= ..\ext
PODDIR		= ..\pod
EXTUTILSDIR	= $(LIBDIR)\ExtUtils

#
INST_SCRIPT	= $(INST_TOP)$(INST_VER)\bin
INST_BIN	= $(INST_SCRIPT)$(INST_ARCH)
INST_LIB	= $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB	= $(INST_LIB)$(INST_ARCH)
INST_COREDIR	= $(INST_ARCHLIB)\CORE
INST_POD	= $(INST_LIB)\pod
INST_HTML	= $(INST_POD)\html

#
# Programs to compile, build .lib files and link
#

CC		= cl
LINK32		= link
LIB32		= $(LINK32) -lib
RSC		= rc

#
# Options
#

RUNTIME		= -MD
INCLUDES	= -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS	= -Fpc:\temp\vcmoduls.pch -YX 
DEFINES		= -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS		= -DPERLDLL -DPERL_CORE
SUBSYS		= console
CXX_FLAG	= -TP -GX

!IF "$(USE_PERLCRT)" != "define"
!   IF  "$(CFG)" == "Debug"
PERLCRTLIBC	= msvcrtd.lib
!   ELSE
PERLCRTLIBC	= msvcrt.lib
!   ENDIF
!ELSE
!   IF  "$(CFG)" == "Debug"
PERLCRTLIBC	= PerlCRTD.lib
!   ELSE
PERLCRTLIBC	= PerlCRT.lib
!   ENDIF
!ENDIF

PERLEXE_RES	=
PERLDLL_RES	=

!IF "$(RUNTIME)" == "-MD"
LIBC		= $(PERLCRTLIBC)
!ELSE
LIBC		= libcmt.lib
!ENDIF

!IF  "$(CFG)" == "Debug"
!  IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE	= -Od $(RUNTIME) -Z7 -D_DEBUG -DDEBUGGING
!  ELSE
OPTIMIZE	= -Od $(RUNTIME)d -Zi -D_DEBUG -DDEBUGGING
!  ENDIF
LINK_DBG	= -debug -pdb:none
!ELSE
!  IF  "$(CFG)" == "Optimize"
# -O1 yields smaller code, which turns out to be faster than -O2
#OPTIMIZE	= -O2 $(RUNTIME) -DNDEBUG
OPTIMIZE	= -O1 $(RUNTIME) -DNDEBUG
!  ELSE
OPTIMIZE	= -Od $(RUNTIME) -DNDEBUG
!  ENDIF
LINK_DBG	= -release
!ENDIF

!IF "$(USE_OBJECT)" == "define"
OPTIMIZE	= $(OPTIMIZE) $(CXX_FLAG)
BUILDOPT	= $(BUILDOPT) -DPERL_OBJECT
!ENDIF

!IF "$(USE_PERLCRT)" != "define"
BUILDOPT	= $(BUILDOPT) -DPERL_MSVCRT_READFIX
!ENDIF

LIBBASEFILES	= $(DELAYLOAD) $(CRYPT_LIB) \
		oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
\
		comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib
\
		netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
		version.lib odbc32.lib odbccp32.lib

# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES	= $(LIBBASEFILES) $(LIBC)

CFLAGS		= -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
		$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS	= -nologo -nodefaultlib $(LINK_DBG) \
		-libpath:"$(INST_COREDIR)" \
		-machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG	= -Fo
EXEOUT_FLAG	= -Fe

CFLAGS_O	= $(CFLAGS) $(BUILDOPT)

#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############

o = .obj

#
# Rules
# 

.SUFFIXES : .c $(o) .dll .lib .exe .rc .res

.c$(o):
	$(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<

.y.c:
	$(NOOP)

$(o).dll:
	$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
	    -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)  

.rc.res:
	$(RSC) -i.. $<

#
# various targets
PERLIMPLIB	= ..\perl56.lib
PERLDLL		= ..\perl56.dll

MINIPERL	= ..\miniperl.exe
MINIDIR		= .\mini
PERLEXE		= ..\perl.exe
WPERLEXE	= ..\wperl.exe
GLOBEXE		= ..\perlglob.exe
CONFIGPM	= ..\lib\Config.pm
MINIMOD		= ..\lib\ExtUtils\Miniperl.pm
X2P		= ..\x2p\a2p.exe

PL2BAT		= bin\pl2bat.pl
GLOBBAT		= bin\perlglob.bat

UTILS		=			\
		..\utils\h2ph		\
		..\utils\splain		\
		..\utils\dprofpp	\
		..\utils\perlbug	\
		..\utils\pl2pm 		\
		..\utils\c2ph		\
		..\utils\h2xs		\
		..\utils\perldoc	\
		..\utils\perlcc		\
		..\pod\checkpods	\
		..\pod\pod2html		\
		..\pod\pod2latex	\
		..\pod\pod2man		\
		..\pod\pod2text		\
		..\pod\pod2usage	\
		..\pod\podchecker	\
		..\pod\podselect	\
		..\x2p\find2perl	\
		..\x2p\s2p		\
		bin\exetype.pl		\
		bin\runperl.pl		\
		bin\pl2bat.pl		\
		bin\perlglob.pl		\
		bin\search.pl

MAKE		= nmake -nologo

CFGSH_TMPL	= config.vc
CFGH_TMPL	= config_H.vc

XCOPY		= xcopy /f /r /i /d
RCOPY		= xcopy /f /r /i /e /d
NOOP		= @echo
NULL		=

#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
XSUBPP		= ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
		-C++ -prototypes

MICROCORE_SRC	=		\
		..\av.c		\
		..\deb.c	\
		..\doio.c	\
		..\doop.c	\
		..\dump.c	\
		..\globals.c	\
		..\gv.c		\
		..\hv.c		\
		..\mg.c		\
		..\op.c		\
		..\perl.c	\
		..\perlapi.c	\
		..\perly.c	\
		..\pp.c		\
		..\pp_ctl.c	\
		..\pp_hot.c	\
		..\pp_sys.c	\
		..\regcomp.c	\
		..\regexec.c	\
		..\run.c	\
		..\scope.c	\
		..\sv.c		\
		..\taint.c	\
		..\toke.c	\
		..\universal.c	\
		..\utf8.c	\
		..\util.c	\
		..\xsutils.c

EXTRACORE_SRC	= $(EXTRACORE_SRC) perllib.c

!IF "$(PERL_MALLOC)" == "define"
EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\malloc.c
!ENDIF

!IF "$(USE_OBJECT)" != "define"
EXTRACORE_SRC	= $(EXTRACORE_SRC) ..\perlio.c
!ENDIF

WIN32_SRC	=		\
		.\win32.c	\
		.\win32sck.c	\
		.\win32thread.c 

!IF "$(CRYPT_SRC)" != ""
WIN32_SRC	= $(WIN32_SRC) .\$(CRYPT_SRC)
!ENDIF

DLL_SRC		= $(DYNALOADER).c

X2P_SRC		=		\
		..\x2p\a2p.c	\
		..\x2p\hash.c	\
		..\x2p\str.c	\
		..\x2p\util.c	\
		..\x2p\walk.c

CORE_NOCFG_H	=		\
		..\av.h		\
		..\cop.h	\
		..\cv.h		\
		..\dosish.h	\
		..\embed.h	\
		..\form.h	\
		..\gv.h		\
		..\handy.h	\
		..\hv.h		\
		..\iperlsys.h	\
		..\mg.h		\
		..\nostdio.h	\
		..\op.h		\
		..\opcode.h	\
		..\perl.h	\
		..\perlapi.h	\
		..\perlsdio.h	\
		..\perlsfio.h	\
		..\perly.h	\
		..\pp.h		\
		..\proto.h	\
		..\regexp.h	\
		..\scope.h	\
		..\sv.h		\
		..\thread.h	\
		..\unixish.h	\
		..\utf8.h	\
		..\util.h	\
		..\warnings.h	\
		..\XSUB.h	\
		..\EXTERN.h	\
		..\perlvars.h	\
		..\intrpvar.h	\
		..\thrdvar.h	\
		.\include\dirent.h	\
		.\include\netdb.h	\
		.\include\sys\socket.h	\
		.\win32.h

CORE_H		= $(CORE_NOCFG_H) .\config.h

MICROCORE_OBJ	= $(MICROCORE_SRC:.c=.obj)
CORE_OBJ	= $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
WIN32_OBJ	= $(WIN32_SRC:.c=.obj)
MINICORE_OBJ	= $(MICROCORE_OBJ:..\=.\mini\)	\
		  $(MINIDIR)\miniperlmain$(o)	\
		  $(MINIDIR)\perlio$(o)
MINIWIN32_OBJ	= $(WIN32_OBJ:.\=.\mini\)
MINI_OBJ	= $(MINICORE_OBJ) $(MINIWIN32_OBJ)
DLL_OBJ		= $(DLL_SRC:.c=.obj)
X2P_OBJ		= $(X2P_SRC:.c=.obj)

PERLDLL_OBJ	= $(CORE_OBJ)
PERLEXE_OBJ	= perlmain$(o)

PERLDLL_OBJ	= $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
#PERLEXE_OBJ	= $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)

!IF "$(USE_SETARGV)" != ""
SETARGV_OBJ	= setargv$(o)
!ENDIF

DYNAMIC_EXT	= Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
		Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
		Sys/Hostname
STATIC_EXT	= DynaLoader
NONXS_EXT	= Errno

DYNALOADER	= $(EXTDIR)\DynaLoader\DynaLoader
SOCKET		= $(EXTDIR)\Socket\Socket
FCNTL		= $(EXTDIR)\Fcntl\Fcntl
OPCODE		= $(EXTDIR)\Opcode\Opcode
SDBM_FILE	= $(EXTDIR)\SDBM_File\SDBM_File
IO		= $(EXTDIR)\IO\IO
POSIX		= $(EXTDIR)\POSIX\POSIX
ATTRS		= $(EXTDIR)\attrs\attrs
THREAD		= $(EXTDIR)\Thread\Thread
B		= $(EXTDIR)\B\B
RE		= $(EXTDIR)\re\re
DUMPER		= $(EXTDIR)\Data\Dumper\Dumper
ERRNO		= $(EXTDIR)\Errno\Errno
PEEK		= $(EXTDIR)\Devel\Peek\Peek
BYTELOADER	= $(EXTDIR)\ByteLoader\ByteLoader
DPROF		= $(EXTDIR)\Devel\DProf\DProf
GLOB		= $(EXTDIR)\File\Glob\Glob
HOSTNAME	= $(EXTDIR)\Sys\Hostname\Hostname

SOCKET_DLL	= $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL	= $(AUTODIR)\Fcntl\Fcntl.dll
OPCODE_DLL	= $(AUTODIR)\Opcode\Opcode.dll
SDBM_FILE_DLL	= $(AUTODIR)\SDBM_File\SDBM_File.dll
IO_DLL		= $(AUTODIR)\IO\IO.dll
POSIX_DLL	= $(AUTODIR)\POSIX\POSIX.dll
ATTRS_DLL	= $(AUTODIR)\attrs\attrs.dll
THREAD_DLL	= $(AUTODIR)\Thread\Thread.dll
B_DLL		= $(AUTODIR)\B\B.dll
DUMPER_DLL	= $(AUTODIR)\Data\Dumper\Dumper.dll
PEEK_DLL	= $(AUTODIR)\Devel\Peek\Peek.dll
RE_DLL		= $(AUTODIR)\re\re.dll
BYTELOADER_DLL	= $(AUTODIR)\ByteLoader\ByteLoader.dll
DPROF_DLL	= $(AUTODIR)\Devel\DProf\DProf.dll
GLOB_DLL	= $(AUTODIR)\File\Glob\Glob.dll
HOSTNAME_DLL	= $(AUTODIR)\Sys\Hostname\Hostname.dll

ERRNO_PM	= $(LIBDIR)\Errno.pm

EXTENSION_C	= 		\
		$(SOCKET).c	\
		$(FCNTL).c	\
		$(OPCODE).c	\
		$(SDBM_FILE).c	\
		$(IO).c		\
		$(POSIX).c	\
		$(ATTRS).c	\
		$(THREAD).c	\
		$(RE).c		\
		$(DUMPER).c	\
		$(PEEK).c	\
		$(B).c		\
		$(BYTELOADER).c	\
		$(DPROF).c	\
		$(GLOB).c	\
		$(HOSTNAME).c

EXTENSION_DLL	= 		\
		$(SOCKET_DLL)	\
		$(FCNTL_DLL)	\
		$(OPCODE_DLL)	\
		$(SDBM_FILE_DLL)\
		$(IO_DLL)	\
		$(POSIX_DLL)	\
		$(ATTRS_DLL)	\
		$(DUMPER_DLL)	\
		$(PEEK_DLL)	\
		$(B_DLL)	\
		$(RE_DLL)	\
		$(THREAD_DLL)	\
		$(BYTELOADER_DLL)	\
		$(DPROF_DLL)	\
		$(GLOB_DLL)	\
		$(HOSTNAME_DLL)

EXTENSION_PM	=		\
		$(ERRNO_PM)

POD2HTML	= $(PODDIR)\pod2html
POD2MAN		= $(PODDIR)\pod2man
POD2LATEX	= $(PODDIR)\pod2latex
POD2TEXT	= $(PODDIR)\pod2text

CFG_VARS	=					\
		"INST_DRV=$(INST_DRV)"			\
		"INST_TOP=$(INST_TOP)"			\
		"INST_VER=$(INST_VER)"			\
		"INST_ARCH=$(INST_ARCH)"		\
		"archname=$(ARCHNAME)"			\
		"cc=$(CC)"				\
		"ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)"	\
		"cf_email=$(EMAIL)"			\
		"d_crypt=$(D_CRYPT)"			\
		"d_mymalloc=$(PERL_MALLOC)"		\
		"libs=$(LIBFILES)"			\
		"incpath=$(CCINCDIR:"=\")"		\
		"libperl=$(PERLIMPLIB:..\=)"		\
		"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")"	\
		"libc=$(LIBC)"				\
		"make=nmake"				\
		"static_ext=$(STATIC_EXT)"		\
		"dynamic_ext=$(DYNAMIC_EXT)"		\
		"nonxs_ext=$(NONXS_EXT)"		\
		"use5005threads=$(USE_5005THREADS)"	\
		"useithreads=$(USE_ITHREADS)"		\
		"usethreads=$(USE_5005THREADS)"		\
		"usemultiplicity=$(USE_MULTI)"		\
		"LINK_FLAGS=$(LINK_FLAGS:"=\")"		\
		"optimize=$(OPTIMIZE:"=\")"

#
# Top targets
#

all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
	$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)

$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c

#------------------------------------------------------------

$(GLOBEXE) : perlglob$(o)
	$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
	    perlglob$(o) setargv$(o) 

perlglob$(o)  : perlglob.c

config.w32 : $(CFGSH_TMPL)
	copy $(CFGSH_TMPL) config.w32

.\config.h : $(CFGH_TMPL)
	-del /f config.h
	copy $(CFGH_TMPL) config.h

..\config.sh : config.w32 $(MINIPERL) config_sh.PL
	$(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 >
..\config.sh

# this target is for when changes to the main config.sh happen
# edit config.{b,v,g}c and make this target once for each supported
# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
regen_config_h:
	perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
	cd ..
	-del /f perl.exe
	perl configpm
	cd win32
	-del /f $(CFGH_TMPL)
	-mkdir $(COREDIR)
	-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
	rename config.h $(CFGH_TMPL)

$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
	cd .. && miniperl configpm
	if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
	$(XCOPY) ..\*.h $(COREDIR)\*.*
	$(XCOPY) *.h $(COREDIR)\*.*
	$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
	$(RCOPY) include $(COREDIR)\*.*
	$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
	    || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)

$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
	$(LINK32) -subsystem:console -out:$@ @<<
	$(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
<<

$(MINIDIR) :
	if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"

$(MINICORE_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c

$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
	$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c

# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
perllib$(o)	: perllib.c .\perlhost.h .\vdir.h .\vmem.h
	$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
!ENDIF

# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
$(MINI_OBJ)	: $(CORE_NOCFG_H)

$(WIN32_OBJ)	: $(CORE_H)
$(CORE_OBJ)	: $(CORE_H)
$(DLL_OBJ)	: $(CORE_H)
$(X2P_OBJ)	: $(CORE_H)

perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
	$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES)
$(BUILDOPT) \
	    CCTYPE=$(CCTYPE) > perldll.def

$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
	$(LINK32) -dll -def:perldll.def -out:$@ @<<
		$(LINK_FLAGS) /base:0x28000000 $(LIBFILES) $(PERLDLL_OBJ)
$(PERLDLL_RES)
<<
	$(XCOPY) $(PERLIMPLIB) $(COREDIR)

$(MINIMOD) : $(MINIPERL) ..\minimod.pl
	cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm

..\x2p\a2p$(o) : ..\x2p\a2p.c
	$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c

..\x2p\hash$(o) : ..\x2p\hash.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c

..\x2p\str$(o) : ..\x2p\str.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c

..\x2p\util$(o) : ..\x2p\util.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c

..\x2p\walk$(o) : ..\x2p\walk.c
	$(CC) -I..\x2p  $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c

$(X2P) : $(MINIPERL) $(X2P_OBJ)
	$(MINIPERL) ..\x2p\find2perl.PL
	$(MINIPERL) ..\x2p\s2p.PL
	$(LINK32) -subsystem:console -out:$@ @<<
		$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
<<

perlmain.c : runperl.c 
	copy runperl.c perlmain.c

perlmain$(o) : perlmain.c
	$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c

$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
	$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
	    $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
	copy $(PERLEXE) $(WPERLEXE)
	$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
	copy splittree.pl .. 
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)

$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
	if not exist $(AUTODIR) mkdir $(AUTODIR)
	cd $(EXTDIR)\$(*B)
	..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
	..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
	cd ..\..\win32
	$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
	$(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
	cd $(EXTDIR)\$(*B)
	$(XSUBPP) dl_win32.xs > $(*B).c
	cd ..\..\win32

$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
	copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs

$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
	cd $(EXTDIR)\Data\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
	cd $(EXTDIR)\Devel\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
	cd $(EXTDIR)\File\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
	cd $(EXTDIR)\Devel\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(RE_DLL): $(PERLEXE) $(RE).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(B_DLL): $(PERLEXE) $(B).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(IO_DLL): $(PERLEXE) $(IO).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
	cd $(EXTDIR)\Sys\$(*B)
	..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\..\win32

$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
	cd $(EXTDIR)\$(*B)
	..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
	$(MAKE)
	cd ..\..\win32

doc: $(PERLEXE)
	$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
	    --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)"
\
	    --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse

utils: $(PERLEXE) $(X2P)
	cd ..\utils
	$(MAKE) PERL=$(MINIPERL)
	cd ..\pod
	copy ..\README.win32 .\perlwin32.pod
	$(MAKE) -f ..\win32\pod.mak converters
	cd ..\win32
	$(PERLEXE) $(PL2BAT) $(UTILS)

distclean: clean
	-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
		$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
	-del /f *.def *.map
	-del /f $(EXTENSION_DLL) $(EXTENSION_PM)
	-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
	-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
	-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
	-del /f $(LIBDIR)\XSLoader.pm
	-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
	-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
	-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm
$(LIBDIR)\POSIX.pm
	-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
	-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
	-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
	-del /f $(LIBDIR)\File\Glob.pm
	-rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
	-rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
	-rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
	-rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
	-del /f $(PODDIR)\*.html
	-del /f $(PODDIR)\*.bat
	cd ..\utils
	-del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp
	-del /f *.bat
	cd ..\win32
	cd ..\x2p
	-del /f find2perl s2p
	-del /f *.bat
	cd ..\win32
	-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c
config.h.new
	-del /f $(CONFIGPM)
	-del /f bin\*.bat
	cd $(EXTDIR)
	-del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
	cd ..\win32
	-rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
	-rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)

install : all installbare # installhtml

installbare : utils
	$(PERLEXE) ..\installperl
	if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
	$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
	$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*

installhtml : doc
	$(RCOPY) html\*.* $(INST_HTML)\*.*

inst_lib : $(CONFIGPM)
	copy splittree.pl .. 
	$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
	$(RCOPY) ..\lib $(INST_LIB)\*.*

minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
	$(XCOPY) $(MINIPERL) ..\t\perl.exe
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
	attrib -r ..\t\*.*
	copy test ..\t
	cd ..\t
	$(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t
pragma/*.t
	cd ..\win32

test-prep : all utils
	$(XCOPY) $(PERLEXE) ..\t\$(NULL)
	$(XCOPY) $(PERLDLL) ..\t\$(NULL)
	$(XCOPY) $(GLOBEXE) ..\t\$(NULL)

test : test-prep
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

test-notty : test-prep
	set PERL_SKIP_TTY_TEST=1
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

test-wide : test-prep
	set HARNESS_PERL_SWITCHES=-C
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

test-wide-notty : test-prep
	set PERL_SKIP_TTY_TEST=1
	set HARNESS_PERL_SWITCHES=-C
	cd ..\t
	$(PERLEXE) -I..\lib harness
	cd ..\win32

clean : 
	-@erase miniperlmain$(o)
	-@erase $(MINIPERL)
	-@erase perlglob$(o)
	-@erase perlmain$(o)
	-@erase config.w32
	-@erase /f config.h
	-@erase $(GLOBEXE)
	-@erase $(PERLEXE)
	-@erase $(WPERLEXE)
	-@erase $(PERLDLL)
	-@erase $(CORE_OBJ)
	-rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
	-@erase $(WIN32_OBJ)
	-@erase $(DLL_OBJ)
	-@erase $(X2P_OBJ)
	-@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
	-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
	-@erase ..\x2p\*.exe ..\x2p\*.bat
	-@erase *.ilk
	-@erase *.pdb

nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About