develooper Front page | perl.perl5.changes | Postings from September 2019

[perl.git] branch blead updated. v5.31.4-5-g3e14cc163c

From:
Max Maischein
Date:
September 20, 2019 22:30
Subject:
[perl.git] branch blead updated. v5.31.4-5-g3e14cc163c
Message ID:
E1iBRPo-0002PY-0a@git.dc.perl.space
In perl.git, the branch blead has been updated

<https://perl5.git.perl.org/perl.git/commitdiff/3e14cc163c638e063c3e2a746616e50ecf58e23e?hp=2d2b4f8f613846dcd1124d970233d5c75d2b428a>

- Log -----------------------------------------------------------------
commit 3e14cc163c638e063c3e2a746616e50ecf58e23e
Author: Max Maischein <corion@corion.net>
Date:   Sat Sep 21 00:19:04 2019 +0200

    Add 5.31.5 to Module::CoreList data

commit ad5045a4c453d4f92f1a0b4511c26f59bb876b45
Author: Max Maischein <corion@corion.net>
Date:   Sat Sep 21 00:09:56 2019 +0200

    Bump Version from 5.31.4 to 5.31.5 in various places

commit 74c14c97b42a9e8fc0a872f65af787755ee009fe
Author: Max Maischein <corion@corion.net>
Date:   Fri Sep 20 23:59:28 2019 +0200

    new perldelta for 5.31.4

-----------------------------------------------------------------------

Summary of changes:
 Cross/config.sh-arm-linux                         |  40 +--
 Cross/config.sh-arm-linux-n770                    |  40 +--
 INSTALL                                           |  32 +-
 MANIFEST                                          |   1 +
 META.json                                         |   2 +-
 META.yml                                          |   2 +-
 Makefile.SH                                       |   8 +-
 NetWare/Makefile                                  |   4 +-
 NetWare/config_H.wc                               |  10 +-
 Porting/Maintainers.pl                            |   2 +-
 Porting/config.sh                                 |  42 +--
 Porting/config_H                                  |  18 +-
 Porting/perldelta_template.pod                    |   2 +-
 README.haiku                                      |   4 +-
 README.macosx                                     |   8 +-
 README.os2                                        |   2 +-
 README.vms                                        |   4 +-
 dist/Module-CoreList/lib/Module/CoreList.pm       |  17 ++
 dist/Module-CoreList/lib/Module/CoreList/Utils.pm |   7 +
 hints/catamount.sh                                |   4 +-
 lib/B/Op_private.pm                               |   2 +-
 patchlevel.h                                      |   4 +-
 plan9/config.plan9                                |  10 +-
 plan9/config_sh.sample                            |  38 +--
 pod/.gitignore                                    |   2 +-
 pod/perl.pod                                      |   1 +
 pod/{perldelta.pod => perl5314delta.pod}          |   2 +-
 pod/perldelta.pod                                 | 348 ++++++++++++++++------
 vms/descrip_mms.template                          |   2 +-
 win32/GNUmakefile                                 |   6 +-
 win32/Makefile                                    |   6 +-
 win32/makefile.mk                                 |   6 +-
 win32/pod.mak                                     |   4 +
 33 files changed, 444 insertions(+), 236 deletions(-)
 copy pod/{perldelta.pod => perl5314delta.pod} (99%)

diff --git a/Cross/config.sh-arm-linux b/Cross/config.sh-arm-linux
index 9bc9903ed8..f0ad143138 100644
--- a/Cross/config.sh-arm-linux
+++ b/Cross/config.sh-arm-linux
@@ -31,12 +31,12 @@ afsroot='/afs'
 alignbytes='4'
 aphostname='/bin/hostname'
 api_revision='5'
-api_subversion='4'
+api_subversion='5'
 api_version='31'
-api_versionstring='5.31.4'
+api_versionstring='5.31.5'
 ar='ar'
-archlib='/usr/lib/perl5/5.31.4/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.31.4/armv4l-linux'
+archlib='/usr/lib/perl5/5.31.5/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.31.5/armv4l-linux'
 archname64=''
 archname='armv4l-linux'
 archobjs=''
@@ -55,7 +55,7 @@ castflags='0'
 cat='cat'
 cc='cc'
 cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.31.4/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.31.5/armv4l-linux/CORE'
 ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccname='arm-linux-gcc'
@@ -821,7 +821,7 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.31.4/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.31.5/armv4l-linux'
 installbin='./install_me_here/usr/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -829,13 +829,13 @@ installman1dir='./install_me_here/usr/share/man/man1'
 installman3dir='./install_me_here/usr/share/man/man3'
 installprefix='./install_me_here/usr'
 installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.31.4'
+installprivlib='./install_me_here/usr/lib/perl5/5.31.5'
 installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.31.4/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.31.5/armv4l-linux'
 installsitebin='./install_me_here/usr/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.31.4'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.31.5'
 installsiteman1dir='./install_me_here/usr/share/man/man1'
 installsiteman3dir='./install_me_here/usr/share/man/man3'
 installsitescript='./install_me_here/usr/bin'
@@ -969,8 +969,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/usr/lib/perl5/5.31.4'
-privlibexp='/usr/lib/perl5/5.31.4'
+privlib='/usr/lib/perl5/5.31.5'
+privlibexp='/usr/lib/perl5/5.31.5'
 procselfexe='"/proc/self/exe"'
 prototype='define'
 ptrsize='4'
@@ -1035,17 +1035,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
 sig_size='68'
 signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.31.4/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.31.4/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.31.5/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.31.5/armv4l-linux'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.31.4'
+sitelib='/usr/lib/perl5/site_perl/5.31.5'
 sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.31.4'
+sitelibexp='/usr/lib/perl5/site_perl/5.31.5'
 siteman1dir='/usr/share/man/man1'
 siteman1direxp='/usr/share/man/man1'
 siteman3dir='/usr/share/man/man3'
@@ -1084,7 +1084,7 @@ stdio_stream_array=''
 strerror_r_proto='0'
 strings='/usr/include/string.h'
 submit=''
-subversion='4'
+subversion='5'
 sysman='/usr/share/man/man1'
 tail=''
 tar=''
@@ -1175,8 +1175,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.31.4'
-version_patchlevel_string='version 31 subversion 4'
+version='5.31.5'
+version_patchlevel_string='version 31 subversion 5'
 versiononly='undef'
 vi=''
 xlibpth='/usr/lib/386 /lib/386'
@@ -1190,9 +1190,9 @@ config_args=''
 config_argc=0
 PERL_REVISION=5
 PERL_VERSION=31
-PERL_SUBVERSION=4
+PERL_SUBVERSION=5
 PERL_API_REVISION=5
 PERL_API_VERSION=31
-PERL_API_SUBVERSION=4
+PERL_API_SUBVERSION=5
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true
diff --git a/Cross/config.sh-arm-linux-n770 b/Cross/config.sh-arm-linux-n770
index 5382163779..2bbc8218d8 100644
--- a/Cross/config.sh-arm-linux-n770
+++ b/Cross/config.sh-arm-linux-n770
@@ -31,12 +31,12 @@ afsroot='/afs'
 alignbytes='4'
 aphostname='/bin/hostname'
 api_revision='5'
-api_subversion='4'
+api_subversion='5'
 api_version='31'
-api_versionstring='5.31.4'
+api_versionstring='5.31.5'
 ar='ar'
-archlib='/usr/lib/perl5/5.31.4/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.31.4/armv4l-linux'
+archlib='/usr/lib/perl5/5.31.5/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.31.5/armv4l-linux'
 archname64=''
 archname='armv4l-linux'
 archobjs=''
@@ -54,7 +54,7 @@ castflags='0'
 cat='cat'
 cc='arm-none-linux-gnueabi-gcc'
 cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.31.4/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.31.5/armv4l-linux/CORE'
 ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccname='arm-linux-gcc'
@@ -819,7 +819,7 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.31.4/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.31.5/armv4l-linux'
 installbin='./install_me_here/usr/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -827,13 +827,13 @@ installman1dir='./install_me_here/usr/share/man/man1'
 installman3dir='./install_me_here/usr/share/man/man3'
 installprefix='./install_me_here/usr'
 installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.31.4'
+installprivlib='./install_me_here/usr/lib/perl5/5.31.5'
 installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.31.4/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.31.5/armv4l-linux'
 installsitebin='./install_me_here/usr/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.31.4'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.31.5'
 installsiteman1dir='./install_me_here/usr/share/man/man1'
 installsiteman3dir='./install_me_here/usr/share/man/man3'
 installsitescript='./install_me_here/usr/bin'
@@ -967,8 +967,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/usr/lib/perl5/5.31.4'
-privlibexp='/usr/lib/perl5/5.31.4'
+privlib='/usr/lib/perl5/5.31.5'
+privlibexp='/usr/lib/perl5/5.31.5'
 procselfexe='"/proc/self/exe"'
 prototype='define'
 ptrsize='4'
@@ -1033,17 +1033,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
 sig_size='68'
 signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.31.4/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.31.4/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.31.5/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.31.5/armv4l-linux'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.31.4'
+sitelib='/usr/lib/perl5/site_perl/5.31.5'
 sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.31.4'
+sitelibexp='/usr/lib/perl5/site_perl/5.31.5'
 siteman1dir='/usr/share/man/man1'
 siteman1direxp='/usr/share/man/man1'
 siteman3dir='/usr/share/man/man3'
@@ -1082,7 +1082,7 @@ stdio_stream_array=''
 strerror_r_proto='0'
 strings='/usr/include/string.h'
 submit=''
-subversion='4'
+subversion='5'
 sysman='/usr/share/man/man1'
 tail=''
 tar=''
@@ -1173,8 +1173,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.31.4'
-version_patchlevel_string='version 31 subversion 4'
+version='5.31.5'
+version_patchlevel_string='version 31 subversion 5'
 versiononly='undef'
 vi=''
 xlibpth='/usr/lib/386 /lib/386'
@@ -1188,9 +1188,9 @@ config_args=''
 config_argc=0
 PERL_REVISION=5
 PERL_VERSION=31
-PERL_SUBVERSION=4
+PERL_SUBVERSION=5
 PERL_API_REVISION=5
 PERL_API_VERSION=31
-PERL_API_SUBVERSION=4
+PERL_API_SUBVERSION=5
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true
diff --git a/INSTALL b/INSTALL
index 4d1d6ff2f1..8c096899a9 100644
--- a/INSTALL
+++ b/INSTALL
@@ -609,7 +609,7 @@ The directories set up by Configure fall into three broad categories.
 
 =item Directories for the perl distribution
 
-By default, Configure will use the following directories for 5.31.4.
+By default, Configure will use the following directories for 5.31.5.
 $version is the full perl version number, including subversion, e.g.
 5.12.3, and $archname is a string like sun4-sunos,
 determined by Configure.  The full definitions of all Configure
@@ -2436,11 +2436,11 @@ L<http://www.chiark.greenend.org.uk/~sgtatham/bugs.html>
 
 =head1 Coexistence with earlier versions of perl 5
 
-Perl 5.31.4 is not binary compatible with earlier versions of Perl.
+Perl 5.31.5 is not binary compatible with earlier versions of Perl.
 In other words, you will have to recompile your XS modules.
 
 In general, you can usually safely upgrade from one version of Perl
-(e.g.  5.31.3) to another similar minor version (e.g. 5.31.4))) without
+(e.g.  5.31.3) to another similar minor version (e.g. 5.31.5))) without
 re-compiling all of your extensions.  You can also safely leave the old
 version around in case the new version causes you problems for some
 reason.
@@ -2511,9 +2511,9 @@ won't interfere with another version.  (The defaults guarantee this for
 libraries after 5.6.0, but not for executables. TODO?)  One convenient
 way to do this is by using a separate prefix for each version, such as
 
-	sh Configure -Dprefix=/opt/perl5.31.4
+	sh Configure -Dprefix=/opt/perl5.31.5
 
-and adding /opt/perl5.31.4/bin to the shell PATH variable.  Such users
+and adding /opt/perl5.31.5/bin to the shell PATH variable.  Such users
 may also wish to add a symbolic link /usr/local/bin/perl so that
 scripts can still start with #!/usr/local/bin/perl.
 
@@ -2526,13 +2526,13 @@ seriously consider using a separate directory, since development
 subversions may not have all the compatibility wrinkles ironed out
 yet.
 
-=head2 Upgrading from 5.31.3 or earlier
+=head2 Upgrading from 5.31.4 or earlier
 
-B<Perl 5.31.4 may not be binary compatible with Perl 5.31.3 or
+B<Perl 5.31.5 may not be binary compatible with Perl 5.31.4 or
 earlier Perl releases.>  Perl modules having binary parts
 (meaning that a C compiler is used) will have to be recompiled to be
-used with 5.31.4.  If you find you do need to rebuild an extension with
-5.31.4, you may safely do so without disturbing the older
+used with 5.31.5.  If you find you do need to rebuild an extension with
+5.31.5, you may safely do so without disturbing the older
 installations.  (See L<"Coexistence with earlier versions of perl 5">
 above.)
 
@@ -2565,15 +2565,15 @@ Firstly, the bare minimum to run this script
      print("$f\n");
   }
 
-in Linux with perl-5.31.4 is as follows (under $Config{prefix}):
+in Linux with perl-5.31.5 is as follows (under $Config{prefix}):
 
   ./bin/perl
-  ./lib/perl5/5.31.4/strict.pm
-  ./lib/perl5/5.31.4/warnings.pm
-  ./lib/perl5/5.31.4/i686-linux/File/Glob.pm
-  ./lib/perl5/5.31.4/feature.pm
-  ./lib/perl5/5.31.4/XSLoader.pm
-  ./lib/perl5/5.31.4/i686-linux/auto/File/Glob/Glob.so
+  ./lib/perl5/5.31.5/strict.pm
+  ./lib/perl5/5.31.5/warnings.pm
+  ./lib/perl5/5.31.5/i686-linux/File/Glob.pm
+  ./lib/perl5/5.31.5/feature.pm
+  ./lib/perl5/5.31.5/XSLoader.pm
+  ./lib/perl5/5.31.5/i686-linux/auto/File/Glob/Glob.so
 
 Secondly, for perl-5.10.1, the Debian perl-base package contains 591
 files, (of which 510 are for lib/unicore) totaling about 3.5MB in its
diff --git a/MANIFEST b/MANIFEST
index 1bc5c813a4..f99fa51250 100644
--- a/MANIFEST
+++ b/MANIFEST
@@ -5001,6 +5001,7 @@ pod/perl5310delta.pod		Perl changes in version 5.31.0
 pod/perl5311delta.pod		Perl changes in version 5.31.1
 pod/perl5312delta.pod		Perl changes in version 5.31.2
 pod/perl5313delta.pod		Perl changes in version 5.31.3
+pod/perl5314delta.pod		Perl changes in version 5.31.4
 pod/perl561delta.pod		Perl changes in version 5.6.1
 pod/perl56delta.pod		Perl changes in version 5.6
 pod/perl581delta.pod		Perl changes in version 5.8.1
diff --git a/META.json b/META.json
index a1a5923936..4696ae5386 100644
--- a/META.json
+++ b/META.json
@@ -127,6 +127,6 @@
          "url" : "http://perl5.git.perl.org/"
       }
    },
-   "version" : "5.031004",
+   "version" : "5.031005",
    "x_serialization_backend" : "JSON::PP version 4.04"
 }
diff --git a/META.yml b/META.yml
index bf63edc345..dc87a0e630 100644
--- a/META.yml
+++ b/META.yml
@@ -114,5 +114,5 @@ resources:
   homepage: http://www.perl.org/
   license: http://dev.perl.org/licenses/
   repository: http://perl5.git.perl.org/
-version: '5.031004'
+version: '5.031005'
 x_serialization_backend: 'CPAN::Meta::YAML version 0.018'
diff --git a/Makefile.SH b/Makefile.SH
index b3cf668da7..44cf79303c 100755
--- a/Makefile.SH
+++ b/Makefile.SH
@@ -589,7 +589,7 @@ esac
 
 $spitshell >>$Makefile <<'!NO!SUBS!'
 
-perltoc_pod_prereqs = extra.pods pod/perl5314delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
+perltoc_pod_prereqs = extra.pods pod/perl5315delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
 generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
 generated_headers = uudmap.h bitcount.h mg_data.h
 
@@ -1153,9 +1153,9 @@ pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc
 pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
 	$(MINIPERL) pod/perlmodlib.PL -q
 
-pod/perl5314delta.pod: pod/perldelta.pod
-	$(RMS) pod/perl5314delta.pod
-	$(LNS) perldelta.pod pod/perl5314delta.pod
+pod/perl5315delta.pod: pod/perldelta.pod
+	$(RMS) pod/perl5315delta.pod
+	$(LNS) perldelta.pod pod/perl5315delta.pod
 
 extra.pods: $(MINIPERL_EXE)
 	-@test ! -f extra.pods || rm -f `cat extra.pods`
diff --git a/NetWare/Makefile b/NetWare/Makefile
index 9b26816d07..59236ae8ca 100644
--- a/NetWare/Makefile
+++ b/NetWare/Makefile
@@ -86,7 +86,7 @@ NLM_VERSION    = 3,20,0
 
 
 # Here comes the CW tools - TO BE FILLED TO BUILD WITH CW -
-MODULE_DESC     = "Perl 5.31.4 for NetWare"
+MODULE_DESC     = "Perl 5.31.5 for NetWare"
 CCTYPE          = CodeWarrior
 C_COMPILER		= mwccnlm -c
 CPP_COMPILER	= mwccnlm
@@ -462,7 +462,7 @@ INST_NW_TOP2 = $(INST_NW_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-INST_VER	= \5.31.4
+INST_VER	= \5.31.5
 
 #
 # Comment this out if you DON'T want your perl installation to have
diff --git a/NetWare/config_H.wc b/NetWare/config_H.wc
index 8348d439f5..8c57defdaa 100644
--- a/NetWare/config_H.wc
+++ b/NetWare/config_H.wc
@@ -887,7 +887,7 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "c:\\perl\\5.31.4\\lib\\NetWare-x86-multi-thread"		/**/
+#define ARCHLIB "c:\\perl\\5.31.5\\lib\\NetWare-x86-multi-thread"		/**/
 /*#define ARCHLIB_EXP ""	/**/
 
 /* ARCHNAME:
@@ -918,8 +918,8 @@
  *	This symbol is the filename expanded version of the BIN symbol, for
  *	programs that do not want to deal with that at run-time.
  */
-#define BIN "c:\\perl\\5.31.4\\bin\\NetWare-x86-multi-thread"	/**/
-#define BIN_EXP "c:\\perl\\5.31.4\\bin\\NetWare-x86-multi-thread"	/**/
+#define BIN "c:\\perl\\5.31.5\\bin\\NetWare-x86-multi-thread"	/**/
+#define BIN_EXP "c:\\perl\\5.31.5\\bin\\NetWare-x86-multi-thread"	/**/
 
 /* BYTEORDER:
  *	This symbol holds the hexadecimal constant defined in byteorder,
@@ -2878,7 +2878,7 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "c:\\perl\\site\\5.31.4\\lib\\NetWare-x86-multi-thread"		/**/
+#define SITEARCH "c:\\perl\\site\\5.31.5\\lib\\NetWare-x86-multi-thread"		/**/
 /*#define SITEARCH_EXP ""	/**/
 
 /* SITELIB:
@@ -2901,7 +2901,7 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "c:\\perl\\site\\5.31.4\\lib"		/**/
+#define SITELIB "c:\\perl\\site\\5.31.5\\lib"		/**/
 /*#define SITELIB_EXP ""	/**/
 #define SITELIB_STEM ""		/**/
 
diff --git a/Porting/Maintainers.pl b/Porting/Maintainers.pl
index 46d82e286c..4792b6ef1a 100755
--- a/Porting/Maintainers.pl
+++ b/Porting/Maintainers.pl
@@ -789,7 +789,7 @@ use File::Glob qw(:case);
     },
 
     'Module::CoreList' => {
-        'DISTRIBUTION' => 'BINGOS/Module-CoreList-5.20190820.tar.gz',
+        'DISTRIBUTION' => 'BINGOS/Module-CoreList-5.20190920.tar.gz',
         'FILES'        => q[dist/Module-CoreList],
     },
 
diff --git a/Porting/config.sh b/Porting/config.sh
index ebcbd06ea2..30b42b0d44 100644
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -44,12 +44,12 @@ afsroot='/afs'
 alignbytes='8'
 aphostname=''
 api_revision='5'
-api_subversion='4'
+api_subversion='5'
 api_version='31'
-api_versionstring='5.31.4'
+api_versionstring='5.31.5'
 ar='ar'
-archlib='/opt/perl/lib/5.31.4/x86_64-linux'
-archlibexp='/opt/perl/lib/5.31.4/x86_64-linux'
+archlib='/opt/perl/lib/5.31.5/x86_64-linux'
+archlibexp='/opt/perl/lib/5.31.5/x86_64-linux'
 archname64=''
 archname='x86_64-linux'
 archobjs=''
@@ -845,7 +845,7 @@ incpath=''
 incpth='/usr/lib/gcc/x86_64-linux-gnu/4.9/include /usr/local/include /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/include'
 inews=''
 initialinstalllocation='/opt/perl/bin'
-installarchlib='/opt/perl/lib/5.31.4/x86_64-linux'
+installarchlib='/opt/perl/lib/5.31.5/x86_64-linux'
 installbin='/opt/perl/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -853,13 +853,13 @@ installman1dir='/opt/perl/man/man1'
 installman3dir='/opt/perl/man/man3'
 installprefix='/opt/perl'
 installprefixexp='/opt/perl'
-installprivlib='/opt/perl/lib/5.31.4'
+installprivlib='/opt/perl/lib/5.31.5'
 installscript='/opt/perl/bin'
-installsitearch='/opt/perl/lib/site_perl/5.31.4/x86_64-linux'
+installsitearch='/opt/perl/lib/site_perl/5.31.5/x86_64-linux'
 installsitebin='/opt/perl/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='/opt/perl/lib/site_perl/5.31.4'
+installsitelib='/opt/perl/lib/site_perl/5.31.5'
 installsiteman1dir='/opt/perl/man/man1'
 installsiteman3dir='/opt/perl/man/man3'
 installsitescript='/opt/perl/bin'
@@ -984,7 +984,7 @@ perl_patchlevel=''
 perl_static_inline='static __inline__'
 perladmin='yourname@yourhost.yourplace.com'
 perllibs='-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc'
-perlpath='/opt/perl/bin/perl5.31.4'
+perlpath='/opt/perl/bin/perl5.31.5'
 pg='pg'
 phostname=''
 pidtype='pid_t'
@@ -993,8 +993,8 @@ pmake=''
 pr=''
 prefix='/opt/perl'
 prefixexp='/opt/perl'
-privlib='/opt/perl/lib/5.31.4'
-privlibexp='/opt/perl/lib/5.31.4'
+privlib='/opt/perl/lib/5.31.5'
+privlibexp='/opt/perl/lib/5.31.5'
 procselfexe='"/proc/self/exe"'
 ptrsize='8'
 quadkind='2'
@@ -1059,17 +1059,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 6, 17, 29, 31, 0'
 sig_size='69'
 signal_t='void'
-sitearch='/opt/perl/lib/site_perl/5.31.4/x86_64-linux'
-sitearchexp='/opt/perl/lib/site_perl/5.31.4/x86_64-linux'
+sitearch='/opt/perl/lib/site_perl/5.31.5/x86_64-linux'
+sitearchexp='/opt/perl/lib/site_perl/5.31.5/x86_64-linux'
 sitebin='/opt/perl/bin'
 sitebinexp='/opt/perl/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/opt/perl/lib/site_perl/5.31.4'
+sitelib='/opt/perl/lib/site_perl/5.31.5'
 sitelib_stem='/opt/perl/lib/site_perl'
-sitelibexp='/opt/perl/lib/site_perl/5.31.4'
+sitelibexp='/opt/perl/lib/site_perl/5.31.5'
 siteman1dir='/opt/perl/man/man1'
 siteman1direxp='/opt/perl/man/man1'
 siteman3dir='/opt/perl/man/man3'
@@ -1095,7 +1095,7 @@ src='.'
 ssizetype='ssize_t'
 st_ino_sign='1'
 st_ino_size='8'
-startperl='#!/opt/perl/bin/perl5.31.4'
+startperl='#!/opt/perl/bin/perl5.31.5'
 startsh='#!/bin/sh'
 static_ext=' '
 stdchar='char'
@@ -1107,7 +1107,7 @@ stdio_ptr='((fp)->_IO_read_ptr)'
 stdio_stream_array=''
 strerror_r_proto='0'
 submit=''
-subversion='4'
+subversion='5'
 sysman='/usr/share/man/man1'
 sysroot=''
 tail=''
@@ -1205,8 +1205,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.31.4'
-version_patchlevel_string='version 31 subversion 4'
+version='5.31.5'
+version_patchlevel_string='version 31 subversion 5'
 versiononly='define'
 vi=''
 xlibpth='/usr/lib/386 /lib/386'
@@ -1216,10 +1216,10 @@ zcat=''
 zip='zip'
 PERL_REVISION=5
 PERL_VERSION=31
-PERL_SUBVERSION=4
+PERL_SUBVERSION=5
 PERL_API_REVISION=5
 PERL_API_VERSION=31
-PERL_API_SUBVERSION=4
+PERL_API_SUBVERSION=5
 PERL_PATCHLEVEL=''
 PERL_CONFIG_SH=true
 : Variables propagated from previous config.sh file.
diff --git a/Porting/config_H b/Porting/config_H
index 758a1b2291..00d95655ac 100644
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -1239,8 +1239,8 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "/opt/perl/lib/5.31.4/x86_64-linux"		/**/
-#define ARCHLIB_EXP "/opt/perl/lib/5.31.4/x86_64-linux"		/**/
+#define ARCHLIB "/opt/perl/lib/5.31.5/x86_64-linux"		/**/
+#define ARCHLIB_EXP "/opt/perl/lib/5.31.5/x86_64-linux"		/**/
 
 /* BIN:
  *	This symbol holds the path of the bin directory where the package will
@@ -1293,8 +1293,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/opt/perl/lib/5.31.4"		/**/
-#define PRIVLIB_EXP "/opt/perl/lib/5.31.4"		/**/
+#define PRIVLIB "/opt/perl/lib/5.31.5"		/**/
+#define PRIVLIB_EXP "/opt/perl/lib/5.31.5"		/**/
 
 /* SITEARCH:
  *	This symbol contains the name of the private library for this package.
@@ -1311,8 +1311,8 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "/opt/perl/lib/site_perl/5.31.4/x86_64-linux"		/**/
-#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.31.4/x86_64-linux"		/**/
+#define SITEARCH "/opt/perl/lib/site_perl/5.31.5/x86_64-linux"		/**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.31.5/x86_64-linux"		/**/
 
 /* SITELIB:
  *	This symbol contains the name of the private library for this package.
@@ -1334,8 +1334,8 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/opt/perl/lib/site_perl/5.31.4"		/**/
-#define SITELIB_EXP "/opt/perl/lib/site_perl/5.31.4"		/**/
+#define SITELIB "/opt/perl/lib/site_perl/5.31.5"		/**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl/5.31.5"		/**/
 #define SITELIB_STEM "/opt/perl/lib/site_perl"		/**/
 
 /* PERL_VENDORARCH:
@@ -4109,7 +4109,7 @@
  *	script to make sure (one hopes) that it runs with perl and not
  *	some shell.
  */
-#define STARTPERL "#!/opt/perl/bin/perl5.31.4"		/**/
+#define STARTPERL "#!/opt/perl/bin/perl5.31.5"		/**/
 
 /* HAS_STDIO_STREAM_ARRAY:
  *	This symbol, if defined, tells that there is an array
diff --git a/Porting/perldelta_template.pod b/Porting/perldelta_template.pod
index 84a39140da..fd7b9e529e 100644
--- a/Porting/perldelta_template.pod
+++ b/Porting/perldelta_template.pod
@@ -403,7 +403,7 @@ died, add a short obituary here.
 
 XXX Generate this with:
 
-  perl Porting/acknowledgements.pl v5.31.4..HEAD
+  perl Porting/acknowledgements.pl v5.31.5..HEAD
 
 =head1 Reporting Bugs
 
diff --git a/README.haiku b/README.haiku
index 3a726373d4..5c40ad104c 100644
--- a/README.haiku
+++ b/README.haiku
@@ -22,9 +22,9 @@ The build procedure is completely standard:
 Make perl executable and create a symlink for libperl:
 
   chmod a+x /boot/common/bin/perl
-  cd /boot/common/lib; ln -s perl5/5.31.4/BePC-haiku/CORE/libperl.so .
+  cd /boot/common/lib; ln -s perl5/5.31.5/BePC-haiku/CORE/libperl.so .
 
-Replace C<5.31.4> with your respective version of Perl.
+Replace C<5.31.5> with your respective version of Perl.
 
 =head1 KNOWN PROBLEMS
 
diff --git a/README.macosx b/README.macosx
index 074f002ecb..0797c99233 100644
--- a/README.macosx
+++ b/README.macosx
@@ -10,9 +10,9 @@ perlmacosx - Perl under Mac OS X
 
 This document briefly describes Perl under Mac OS X.
 
-  curl -O http://www.cpan.org/src/perl-5.31.4.tar.gz
-  tar -xzf perl-5.31.4.tar.gz
-  cd perl-5.31.4
+  curl -O http://www.cpan.org/src/perl-5.31.5.tar.gz
+  tar -xzf perl-5.31.5.tar.gz
+  cd perl-5.31.5
   ./Configure -des -Dprefix=/usr/local/
   make
   make test
@@ -20,7 +20,7 @@ This document briefly describes Perl under Mac OS X.
 
 =head1 DESCRIPTION
 
-The latest Perl release (5.31.4 as of this writing) builds without changes
+The latest Perl release (5.31.5 as of this writing) builds without changes
 under all versions of Mac OS X from 10.3 "Panther" onwards. 
 
 In order to build your own version of Perl you will need 'make',
diff --git a/README.os2 b/README.os2
index 7741e7effa..2487ff0809 100644
--- a/README.os2
+++ b/README.os2
@@ -619,7 +619,7 @@ C<set PERLLIB_PREFIX> in F<Config.sys>, see L</"C<PERLLIB_PREFIX>">.
 
 =item Additional Perl modules
 
-  unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.31.4/
+  unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.31.5/
 
 Same remark as above applies.  Additionally, if this directory is not
 one of directories on @INC (and @INC is influenced by C<PERLLIB_PREFIX>), you
diff --git a/README.vms b/README.vms
index 74886c275f..89cbcc1409 100644
--- a/README.vms
+++ b/README.vms
@@ -142,11 +142,11 @@ You may need to set up a foreign symbol for the unpacking utility of
 choice.  Once you have done so, use a command like the following to
 unpack the archive:
 
-    vmstar -xvf perl-5^.31^.4.tar
+    vmstar -xvf perl-5^.31^.5.tar
 
 Then set default to the top-level source directory like so:
 
-    set default [.perl-5^.31^.4]
+    set default [.perl-5^.31^.5]
 
 and proceed with configuration as described in the next section.
 
diff --git a/dist/Module-CoreList/lib/Module/CoreList.pm b/dist/Module-CoreList/lib/Module/CoreList.pm
index eace194993..9a27ada526 100644
--- a/dist/Module-CoreList/lib/Module/CoreList.pm
+++ b/dist/Module-CoreList/lib/Module/CoreList.pm
@@ -354,6 +354,7 @@ sub changes_between {
     5.031002 => '2019-07-20',
     5.031003 => '2019-08-20',
     5.031004 => '2019-09-20',
+    5.031005 => '2019-10-20',
   );
 
 for my $version ( sort { $a <=> $b } keys %released ) {
@@ -16823,6 +16824,15 @@ for my $version ( sort { $a <=> $b } keys %released ) {
         removed => {
         }
     },
+    5.031005 => {
+        delta_from => 5.031004,
+        changed => {
+            'B::Op_private'         => '5.031005',
+            'Config'                => '5.031005',
+        },
+        removed => {
+        }
+    },
 );
 
 sub is_core
@@ -17860,6 +17870,13 @@ sub is_core
         removed => {
         }
     },
+    5.031005 => {
+        delta_from => 5.031004,
+        changed => {
+        },
+        removed => {
+        }
+    },
 );
 
 %deprecated = _undelta(\%deprecated);
diff --git a/dist/Module-CoreList/lib/Module/CoreList/Utils.pm b/dist/Module-CoreList/lib/Module/CoreList/Utils.pm
index 7a4d252a3d..03f2d3cbe7 100644
--- a/dist/Module-CoreList/lib/Module/CoreList/Utils.pm
+++ b/dist/Module-CoreList/lib/Module/CoreList/Utils.pm
@@ -1537,6 +1537,13 @@ my %delta = (
         removed => {
         }
     },
+    5.031005 => {
+        delta_from => 5.031004,
+        changed => {
+        },
+        removed => {
+        }
+    },
 );
 
 %utilities = Module::CoreList::_undelta(\%delta);
diff --git a/hints/catamount.sh b/hints/catamount.sh
index d0d29ec46d..07488374c9 100644
--- a/hints/catamount.sh
+++ b/hints/catamount.sh
@@ -31,11 +31,11 @@
 # mkdir -p /opt/perl-catamount
 # mkdir -p /opt/perl-catamount/include
 # mkdir -p /opt/perl-catamount/lib
-# mkdir -p /opt/perl-catamount/lib/perl5/5.31.4
+# mkdir -p /opt/perl-catamount/lib/perl5/5.31.5
 # mkdir -p /opt/perl-catamount/bin
 # cp *.h /opt/perl-catamount/include
 # cp libperl.a /opt/perl-catamount/lib
-# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.31.4
+# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.31.5
 # cp miniperl perl run.sh cc.sh /opt/perl-catamount/lib
 #
 # With the headers and the libperl.a you can embed Perl to your Catamount
diff --git a/lib/B/Op_private.pm b/lib/B/Op_private.pm
index fac34f7bca..55347b18b9 100644
--- a/lib/B/Op_private.pm
+++ b/lib/B/Op_private.pm
@@ -118,7 +118,7 @@ package B::Op_private;
 our %bits;
 
 
-our $VERSION = "5.031004";
+our $VERSION = "5.031005";
 
 $bits{$_}{3} = 'OPpENTERSUB_AMPER' for qw(entersub rv2cv);
 $bits{$_}{6} = 'OPpENTERSUB_DB' for qw(entersub rv2cv);
diff --git a/patchlevel.h b/patchlevel.h
index 715bedba3e..8b4a36c77a 100644
--- a/patchlevel.h
+++ b/patchlevel.h
@@ -15,7 +15,7 @@
 
 #define PERL_REVISION	5		/* age */
 #define PERL_VERSION	31		/* epoch */
-#define PERL_SUBVERSION	4		/* generation */
+#define PERL_SUBVERSION	5		/* generation */
 
 /* The following numbers describe the earliest compatible version of
    Perl ("compatibility" here being defined as sufficient binary/API
@@ -36,7 +36,7 @@
 */
 #define PERL_API_REVISION	5
 #define PERL_API_VERSION	31
-#define PERL_API_SUBVERSION	4
+#define PERL_API_SUBVERSION	5
 /*
    XXX Note:  The selection of non-default Configure options, such
    as -Duselonglong may invalidate these settings.  Currently, Configure
diff --git a/plan9/config.plan9 b/plan9/config.plan9
index efe6488dfd..2cae922a5b 100644
--- a/plan9/config.plan9
+++ b/plan9/config.plan9
@@ -3131,8 +3131,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/sys/lib/perl/5.31.4"		/**/
-#define PRIVLIB_EXP "/sys/lib/perl/5.31.4"		/**/
+#define PRIVLIB "/sys/lib/perl/5.31.5"		/**/
+#define PRIVLIB_EXP "/sys/lib/perl/5.31.5"		/**/
 
 /* PTRSIZE:
  *	This symbol contains the size of a pointer, so that the C preprocessor
@@ -3259,9 +3259,9 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/sys/lib/perl/5.31.4/site_perl"		/**/
-#define SITELIB_EXP "/sys/lib/perl/5.31.4/site_perl"		/**/
-#define SITELIB_STEM "/sys/lib/perl/5.31.4/site_perl"		/**/
+#define SITELIB "/sys/lib/perl/5.31.5/site_perl"		/**/
+#define SITELIB_EXP "/sys/lib/perl/5.31.5/site_perl"		/**/
+#define SITELIB_STEM "/sys/lib/perl/5.31.5/site_perl"		/**/
 
 /* Size_t_size:
  *	This symbol holds the size of a Size_t in bytes.
diff --git a/plan9/config_sh.sample b/plan9/config_sh.sample
index 6b2d0d4f61..5f9d6067c3 100644
--- a/plan9/config_sh.sample
+++ b/plan9/config_sh.sample
@@ -31,12 +31,12 @@ afsroot='/afs'
 alignbytes='4'
 aphostname='/bin/uname -n'
 api_revision='5'
-api_subversion='4'
+api_subversion='5'
 api_version='31'
-api_versionstring='5.31.4'
+api_versionstring='5.31.5'
 ar='ar'
-archlib='/sys/lib/perl5/5.31.4/386'
-archlibexp='/sys/lib/perl5/5.31.4/386'
+archlib='/sys/lib/perl5/5.31.5/386'
+archlibexp='/sys/lib/perl5/5.31.5/386'
 archname64=''
 archname='386'
 archobjs=''
@@ -815,17 +815,17 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='/sys/lib/perl/5.31.4/386'
+installarchlib='/sys/lib/perl/5.31.5/386'
 installbin='/usr/bin'
 installman1dir='/sys/man/1pub'
 installman3dir='/sys/man/2pub'
 installprefix='/usr'
 installprefixexp='/usr'
-installprivlib='/sys/lib/perl/5.31.4'
+installprivlib='/sys/lib/perl/5.31.5'
 installscript='/usr/bin'
-installsitearch='/sys/lib/perl/5.31.4/site_perl/386'
+installsitearch='/sys/lib/perl/5.31.5/site_perl/386'
 installsitebin='/usr/bin'
-installsitelib='/sys/lib/perl/5.31.4/site_perl'
+installsitelib='/sys/lib/perl/5.31.5/site_perl'
 installstyle='lib/perl5'
 installusrbinperl='undef'
 installvendorarch=''
@@ -950,8 +950,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/sys/lib/perl/5.31.4'
-privlibexp='/sys/lib/perl/5.31.4'
+privlib='/sys/lib/perl/5.31.5'
+privlibexp='/sys/lib/perl/5.31.5'
 procselfexe=''
 prototype='define'
 ptrsize='4'
@@ -1016,13 +1016,13 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 0'
 sig_size='50'
 signal_t='void'
-sitearch='/sys/lib/perl/5.31.4/site_perl/386'
+sitearch='/sys/lib/perl/5.31.5/site_perl/386'
 sitearchexp='/sys/lib/perl/site_perl/386'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
-sitelib='/sys/lib/perl/5.31.4/site_perl'
-sitelib_stem='/sys/lib/perl/5.31.4/site_perl'
-sitelibexp='/sys/lib/perl/5.31.4/site_perl'
+sitelib='/sys/lib/perl/5.31.5/site_perl'
+sitelib_stem='/sys/lib/perl/5.31.5/site_perl'
+sitelibexp='/sys/lib/perl/5.31.5/site_perl'
 siteprefix='/usr'
 siteprefixexp='/usr'
 sizesize='4'
@@ -1055,7 +1055,7 @@ stdio_stream_array=''
 strerror_r_proto='0'
 strings='/sys/include/ape/string.h'
 submit=''
-subversion='4'
+subversion='5'
 sysman='/sys/man/1pub'
 tail=''
 tar=''
@@ -1136,8 +1136,8 @@ vendorlib_stem=''
 vendorlibexp=''
 vendorprefix=''
 vendorprefixexp=''
-version='5.31.4'
-version_patchlevel_string='version 31 subversion 4'
+version='5.31.5'
+version_patchlevel_string='version 31 subversion 5'
 versiononly='undef'
 vi=''
 xlibpth=''
@@ -1151,9 +1151,9 @@ config_args=''
 config_argc=0
 PERL_REVISION=5
 PERL_VERSION=31
-PERL_SUBVERSION=4
+PERL_SUBVERSION=5
 PERL_API_REVISION=5
 PERL_API_VERSION=31
-PERL_API_SUBVERSION=4
+PERL_API_SUBVERSION=5
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true
diff --git a/pod/.gitignore b/pod/.gitignore
index 5a74c4df52..cb0375b0af 100644
--- a/pod/.gitignore
+++ b/pod/.gitignore
@@ -49,7 +49,7 @@
 /roffitall
 
 # generated
-/perl5314delta.pod
+/perl5315delta.pod
 /perlapi.pod
 /perlintern.pod
 /perlmodlib.pod
diff --git a/pod/perl.pod b/pod/perl.pod
index e7cd295f9d..fba112f282 100644
--- a/pod/perl.pod
+++ b/pod/perl.pod
@@ -181,6 +181,7 @@ aux h2ph h2xs perlbug pl2pm pod2html pod2man splain xsubpp
 
     perlhist		Perl history records
     perldelta		Perl changes since previous version
+    perl5314delta	Perl changes in version 5.31.4
     perl5313delta	Perl changes in version 5.31.3
     perl5312delta	Perl changes in version 5.31.2
     perl5311delta	Perl changes in version 5.31.1
diff --git a/pod/perldelta.pod b/pod/perl5314delta.pod
similarity index 99%
copy from pod/perldelta.pod
copy to pod/perl5314delta.pod
index 0b04894f03..40c3249434 100644
--- a/pod/perldelta.pod
+++ b/pod/perl5314delta.pod
@@ -2,7 +2,7 @@
 
 =head1 NAME
 
-perldelta - what is new for perl v5.31.4
+perl5314delta - what is new for perl v5.31.4
 
 =head1 DESCRIPTION
 
diff --git a/pod/perldelta.pod b/pod/perldelta.pod
index 0b04894f03..337e4c286f 100644
--- a/pod/perldelta.pod
+++ b/pod/perldelta.pod
@@ -2,98 +2,157 @@
 
 =head1 NAME
 
-perldelta - what is new for perl v5.31.4
+[ this is a template for a new perldelta file.  Any text flagged as XXX needs
+to be processed before release. ]
+
+perldelta - what is new for perl v5.31.5
 
 =head1 DESCRIPTION
 
-This document describes differences between the 5.31.3 release and the 5.31.4
+This document describes differences between the 5.31.4 release and the 5.31.5
 release.
 
-If you are upgrading from an earlier release such as 5.31.2, first read
-L<perl5313delta>, which describes differences between 5.31.2 and 5.31.3.
+If you are upgrading from an earlier release such as 5.31.3, first read
+L<perl5314delta>, which describes differences between 5.31.3 and 5.31.4.
 
 =head1 Notice
 
-I<None>
+XXX Any important notices here
 
 =head1 Core Enhancements
 
-=head2 Now can dump compiled patterns before optimization
+XXX New core language features go here.  Summarize user-visible core language
+enhancements.  Particularly prominent performance optimisations could go
+here, but most should go in the L</Performance Enhancements> section.
+
+[ List each enhancement as a =head2 entry ]
+
+=head1 Security
 
-This is primarily useful for tracking down bugs in the regular
-expression compiler.  This dump happens on C<-DDEBUGGING> perls, if you
-specify C<-Drv> on the command line; or on any perl if the pattern is
-compiled within the scope of S<C<use re qw(Debug DUMP_PRE_OPTIMIZE)>> or
-S<C<use re qw(Debug COMPILE EXTRA)>>.  (All but the 2nd case display
-other information as well.)
+XXX Any security-related notices go here.  In particular, any security
+vulnerabilities closed should be noted here rather than in the
+L</Selected Bug Fixes> section.
+
+[ List each security issue as a =head2 entry ]
 
 =head1 Incompatible Changes
 
-    There are no changes intentionally incompatible with 5.31.3
+XXX For a release on a stable branch, this section aspires to be:
+
+    There are no changes intentionally incompatible with 5.XXX.XXX
     If any exist, they are bugs, and we request that you submit a
     report.  See L</Reporting Bugs> below.
 
+[ List each incompatible change as a =head2 entry ]
+
 =head1 Deprecations
 
+XXX Any deprecated features, syntax, modules etc. should be listed here.
+
 =head2 Module removals
 
-I<None>
+XXX Remove this section if not applicable.
 
-=head1 Performance Enhancements
+The following modules will be removed from the core distribution in a
+future release, and will at that time need to be installed from CPAN.
+Distributions on CPAN which require these modules will need to list them as
+prerequisites.
 
-I<None>
+The core versions of these modules will now issue C<"deprecated">-category
+warnings to alert you to this fact.  To silence these deprecation warnings,
+install the modules in question from CPAN.
 
-=head1 Modules and Pragmata
+Note that these are (with rare exceptions) fine modules that you are encouraged
+to continue to use.  Their disinclusion from core primarily hinges on their
+necessity to bootstrapping a fully functional, CPAN-capable Perl installation,
+not usually on concerns over their design.
 
-=head2 New Modules and Pragmata
+=over
 
-I<None>
+=item XXX
 
-=head2 Updated Modules and Pragmata
+XXX Note that deprecated modules should be listed here even if they are listed
+as an updated module in the L</Modules and Pragmata> section.
+
+=back
+
+[ List each other deprecation as a =head2 entry ]
+
+=head1 Performance Enhancements
+
+XXX Changes which enhance performance without changing behaviour go here.
+There may well be none in a stable release.
+
+[ List each enhancement as an =item entry ]
 
 =over 4
 
 =item *
 
-L<ExtUtils::MakeMaker> has been upgraded from version 7.36 to 7.38.
+XXX
 
-=item *
+=back
 
-L<I18N::Langinfo> has been upgraded from version 0.18 to 0.19.
+=head1 Modules and Pragmata
 
-=item *
+XXX All changes to installed files in F<cpan/>, F<dist/>, F<ext/> and F<lib/>
+go here.  If Module::CoreList is updated, generate an initial draft of the
+following sections using F<Porting/corelist-perldelta.pl>.  A paragraph summary
+for important changes should then be added by hand.  In an ideal world,
+dual-life modules would have a F<Changes> file that could be cribbed.
 
-L<Module::CoreList> has been upgraded from version 5.20190820 to 5.20190920.
+The list of new and updated modules is modified automatically as part of
+preparing a Perl release, so the only reason to manually add entries here is if
+you're summarising the important changes in the module update. (Also, if the
+manually-added details don't match the automatically-generated ones, the
+release manager will have to investigate the situation carefully.)
 
-=item *
+[ Within each section, list entries as an =item entry ]
+
+=head2 New Modules and Pragmata
 
-L<Module::Metadata> has been upgraded from version 1.000036 to 1.000037.
+=over 4
 
 =item *
 
-L<re> has been upgraded from version 0.37 to 0.38.
+XXX Remove this section if not applicable.
 
-=item *
+=back
 
-L<Scalar::Util> has been upgraded from version 1.50 to 1.52.
+=head2 Updated Modules and Pragmata
+
+=over 4
 
 =item *
 
-L<Test::Simple> has been upgraded from version 1.302166 to 1.302168.
+L<XXX> has been upgraded from version A.xx to B.yy.
 
-=item *
+If there was something important to note about this change, include that here.
+
+=back
 
-L<Time::HiRes> has been upgraded from version 1.9762 to 1.9763.
+=head2 Removed Modules and Pragmata
+
+=over 4
 
 =item *
 
-L<XS::APItest> has been upgraded from version 1.02 to 1.03.
+XXX
 
 =back
 
-=head2 Removed Modules and Pragmata
+=head1 Documentation
+
+XXX Changes to files in F<pod/> go here.  Consider grouping entries by
+file and be sure to link to the appropriate page, e.g. L<perlfunc>.
 
-I<None>
+=head2 New Documentation
+
+XXX Changes which create B<new> files in F<pod/> go here.
+
+=head3 L<XXX>
+
+XXX Description of the purpose of the new file here
 
 =head2 Changes to Existing Documentation
 
@@ -101,16 +160,19 @@ We have attempted to update the documentation to reflect the changes
 listed in this document.  If you find any we have missed, send email
 to L<perlbug@perl.org|mailto:perlbug@perl.org>.
 
+XXX Changes which significantly change existing files in F<pod/> go here.
+However, any changes to F<pod/perldiag.pod> should go in the L</Diagnostics>
+section.
+
 Additionally, the following selected changes have been made:
 
-=head3 L<perlapi>, L<perlintern>
+=head3 L<XXX>
 
 =over 4
 
 =item *
 
-Documentation has been added for a dozen or two functions that were
-lacking it before.
+XXX Description of the change here
 
 =back
 
@@ -120,45 +182,168 @@ The following additions or changes have been made to diagnostic output,
 including warnings and fatal error messages.  For the complete list of
 diagnostic messages, see L<perldiag>.
 
+XXX New or changed warnings emitted by the core's C<C> code go here.  Also
+include any changes in L<perldiag> that reconcile it to the C<C> code.
+
 =head2 New Diagnostics
 
-I<None>
+XXX Newly added diagnostic messages go under here, separated into New Errors
+and New Warnings
+
+=head3 New Errors
+
+=over 4
+
+=item *
+
+XXX L<message|perldiag/"message">
+
+=back
+
+=head3 New Warnings
+
+=over 4
+
+=item *
+
+XXX L<message|perldiag/"message">
+
+=back
+
+=head2 Changes to Existing Diagnostics
+
+XXX Changes (i.e. rewording) of diagnostic messages go here
+
+=over 4
+
+=item *
+
+XXX Describe change here
+
+=back
+
+=head1 Utility Changes
+
+XXX Changes to installed programs such as F<perlbug> and F<xsubpp> go here.
+Most of these are built within the directory F<utils>.
+
+[ List utility changes as a =head2 entry for each utility and =item
+entries for each change
+Use L<XXX> with program names to get proper documentation linking. ]
+
+=head2 L<XXX>
+
+=over 4
+
+=item *
+
+XXX
+
+=back
 
 =head1 Configuration and Compilation
 
+XXX Changes to F<Configure>, F<installperl>, F<installman>, and analogous tools
+go here.  Any other changes to the Perl build process should be listed here.
+However, any platform-specific changes should be listed in the
+L</Platform Support> section, instead.
+
+[ List changes as an =item entry ].
+
 =over 4
 
 =item *
 
-Improvements in F<Configure> to detection in C++ and clang++.  Work ongoing by
-Andy Dougherty. [perl #134171]
+XXX
 
 =back
 
 =head1 Testing
 
+XXX Any significant changes to the testing of a freshly built perl should be
+listed here.  Changes which create B<new> files in F<t/> go here as do any
+large changes to the testing harness (e.g. when parallel testing was added).
+Changes to existing files in F<t/> aren't worth summarizing, although the bugs
+that they represent may be covered elsewhere.
+
+XXX If there were no significant test changes, say this:
+
 Tests were added and changed to reflect the other additions and changes
 in this release.
 
+XXX If instead there were significant changes, say this:
+
+Tests were added and changed to reflect the other additions and
+changes in this release.  Furthermore, these significant changes were
+made:
+
+[ List each test improvement as an =item entry ]
+
+=over 4
+
+=item *
+
+XXX
+
+=back
+
 =head1 Platform Support
 
-=head2 Platform-Specific Notes
+XXX Any changes to platform support should be listed in the sections below.
+
+[ Within the sections, list each platform as an =item entry with specific
+changes as paragraphs below it. ]
+
+=head2 New Platforms
+
+XXX List any platforms that this version of perl compiles on, that previous
+versions did not.  These will either be enabled by new files in the F<hints/>
+directories, or new subdirectories and F<README> files at the top level of the
+source tree.
+
+=over 4
+
+=item XXX-some-platform
+
+XXX
+
+=back
+
+=head2 Discontinued Platforms
+
+XXX List any platforms that this version of perl no longer compiles on.
 
 =over 4
 
-=item Win32
+=item XXX-some-platform
+
+XXX
+
+=back
+
+=head2 Platform-Specific Notes
 
-The locale tests could crash on Win32 due to a Windows bug, and
-separately due to the CRT throwing an exception if the locale name
-wasn't validly encoded in the current code page.
+XXX List any changes for specific platforms.  This could include configuration
+and compilation changes or changes in portability/compatibility.  However,
+changes within modules for platforms should generally be listed in the
+L</Modules and Pragmata> section.
+
+=over 4
 
-For the second we now decode the locale name ourselves, and always
-decode it as UTF-8.  [perl #133981]
+=item XXX-some-platform
+
+XXX
 
 =back
 
 =head1 Internal Changes
 
+XXX Changes which affect the interface available to C<XS> code go here.  Other
+significant internal changes for future core maintainers should be noted as
+well.
+
+[ List each change as an =item entry ]
+
 =over 4
 
 =item *
@@ -169,63 +354,56 @@ XXX
 
 =head1 Selected Bug Fixes
 
+XXX Important bug fixes in the core language are summarized here.  Bug fixes in
+files in F<ext/> and F<lib/> are best summarized in L</Modules and Pragmata>.
+
+[ List each fix as an =item entry ]
+
 =over 4
 
 =item *
 
-Perl no longer treats strings starting with "0x" or "0b" as hex or
-binary numbers respectively when converting a string to a number.
-This reverts a change in behaviour inadvertently introduced in perl
-5.30.0 intended to improve precision when converting a string to a
-floating point number. [perl #134230]
+XXX
 
-=item *
+=back
 
-Matching a non-C<SVf_UTF8> string against a regular expression
-containing unicode literals could leak a SV on each match attempt.
-[perl #134390]
+=head1 Known Problems
+
+XXX Descriptions of platform agnostic bugs we know we can't fix go here.  Any
+tests that had to be C<TODO>ed for the release would be noted here.  Unfixed
+platform specific bugs also go here.
+
+[ List each fix as an =item entry ]
+
+=over 4
 
 =item *
 
-Overloads for octal and binary floating point literals were always
-passed a string with a C<0x> prefix instead of the appropriate C<0> or
-C<0b> prefix.  [perl #125557]
+XXX
 
 =back
 
-=head1 Known Problems
+=head1 Errata From Previous Releases
 
-I<None>
+=over 4
 
-=head1 Acknowledgements
+=item *
 
-Perl 5.31.4 represents approximately 4 weeks of development since Perl
-5.31.3 and contains approximately 6,700 lines of changes across 260 files
-from 18 authors.
+XXX Add anything here that we forgot to add, or were mistaken about, in
+the perldelta of a previous release.
 
-Excluding auto-generated files, documentation and release tools, there were
-approximately 3,900 lines of changes to 180 .pm, .t, .c and .h files.
+=back
 
-Perl continues to flourish into its fourth decade thanks to a vibrant
-community of users and developers. The following people are known to have
-contributed the improvements that became Perl 5.31.4:
+=head1 Obituary
 
-Chad Granum, Chris 'BinGOs' Williams, Craig A. Berry, Dan Book, David
-Mitchell, Florian Weimer, Hauke D, H.Merijn Brand, James E Keenan, Kang-min
-Liu, Karl Williamson, Max Maischein, Pali, Sisyphus, Tomasz Konojacki, Tom
-Hukins, Tony Cook, VanL.
+XXX If any significant core contributor or member of the CPAN community has
+died, add a short obituary here.
 
-The list above is almost certainly incomplete as it is automatically
-generated from version control history. In particular, it does not include
-the names of the (very much appreciated) contributors who reported issues to
-the Perl bug tracker.
+=head1 Acknowledgements
 
-Many of the changes included in this version originated in the CPAN modules
-included in Perl's core. We're grateful to the entire CPAN community for
-helping Perl to flourish.
+XXX Generate this with:
 
-For a more complete list of all of Perl's historical contributors, please
-see the F<AUTHORS> file in the Perl source distribution.
+  perl Porting/acknowledgements.pl v5.31.4..HEAD
 
 =head1 Reporting Bugs
 
diff --git a/vms/descrip_mms.template b/vms/descrip_mms.template
index 25bc7fd0d6..7be734e21f 100644
--- a/vms/descrip_mms.template
+++ b/vms/descrip_mms.template
@@ -313,7 +313,7 @@ utils : $(utils1) $(utils2) $(utils3) $(utils4) $(utils5)
 extra.pods : miniperl
 	@ @extra_pods.com
 
-PERLDELTA_CURRENT = [.pod]perl5314delta.pod
+PERLDELTA_CURRENT = [.pod]perl5315delta.pod
 
 $(PERLDELTA_CURRENT) : [.pod]perldelta.pod
 	Copy/NoConfirm/Log $(MMS$SOURCE) $(PERLDELTA_CURRENT)
diff --git a/win32/GNUmakefile b/win32/GNUmakefile
index bad4db8107..59dbfdab08 100644
--- a/win32/GNUmakefile
+++ b/win32/GNUmakefile
@@ -64,7 +64,7 @@ INST_TOP := $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER	:= \5.31.4
+#INST_VER	:= \5.31.5
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -1761,7 +1761,7 @@ utils: $(HAVEMINIPERL) ..\utils\Makefile
 	copy ..\README.tw       ..\pod\perltw.pod
 	copy ..\README.vos      ..\pod\perlvos.pod
 	copy ..\README.win32    ..\pod\perlwin32.pod
-	copy ..\pod\perldelta.pod ..\pod\perl5314delta.pod
+	copy ..\pod\perldelta.pod ..\pod\perl5315delta.pod
 	$(MINIPERL) -I..\lib $(PL2BAT) $(UTILS)
 	$(MINIPERL) -I..\lib ..\autodoc.pl ..
 	$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
@@ -1859,7 +1859,7 @@ distclean: realclean
 	-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
 	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
 	-cd $(PODDIR) && del /f *.html *.bat roffitall \
-	    perl5314delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+	    perl5315delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
 	    perlapi.pod perlbs2000.pod perlcn.pod perlcygwin.pod \
 	    perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
 	    perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
diff --git a/win32/Makefile b/win32/Makefile
index b5cdb287b2..29ae90d4f6 100644
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -38,7 +38,7 @@ INST_TOP	= $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER	= \5.31.4
+#INST_VER	= \5.31.5
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -1282,7 +1282,7 @@ utils: $(PERLEXE) ..\utils\Makefile
 	copy ..\README.tw       ..\pod\perltw.pod
 	copy ..\README.vos      ..\pod\perlvos.pod
 	copy ..\README.win32    ..\pod\perlwin32.pod
-	copy ..\pod\perldelta.pod ..\pod\perl5314delta.pod
+	copy ..\pod\perldelta.pod ..\pod\perl5315delta.pod
 	cd ..\win32
 	$(PERLEXE) $(PL2BAT) $(UTILS)
 	$(MINIPERL) -I..\lib ..\autodoc.pl ..
@@ -1381,7 +1381,7 @@ distclean: realclean
 	-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
 	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
 	-cd $(PODDIR) && del /f *.html *.bat roffitall \
-	    perl5314delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+	    perl5315delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
 	    perlapi.pod perlbs2000.pod perlcn.pod perlcygwin.pod \
 	    perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
 	    perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
diff --git a/win32/makefile.mk b/win32/makefile.mk
index e11de053d9..9d40c6cfc5 100644
--- a/win32/makefile.mk
+++ b/win32/makefile.mk
@@ -45,7 +45,7 @@ INST_TOP	*= $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER	*= \5.31.4
+#INST_VER	*= \5.31.5
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -1678,7 +1678,7 @@ utils: $(HAVEMINIPERL) ..\utils\Makefile
 	copy ..\README.tw       ..\pod\perltw.pod
 	copy ..\README.vos      ..\pod\perlvos.pod
 	copy ..\README.win32    ..\pod\perlwin32.pod
-	copy ..\pod\perldelta.pod ..\pod\perl5314delta.pod
+	copy ..\pod\perldelta.pod ..\pod\perl5315delta.pod
 	$(MINIPERL) -I..\lib $(PL2BAT) $(UTILS)
 	$(MINIPERL) -I..\lib ..\autodoc.pl ..
 	$(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q ..
@@ -1776,7 +1776,7 @@ distclean: realclean
 	-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
 	-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
 	-cd $(PODDIR) && del /f *.html *.bat roffitall \
-	    perl5314delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
+	    perl5315delta.pod perlaix.pod perlamiga.pod perlandroid.pod \
 	    perlapi.pod perlbs2000.pod perlcn.pod perlcygwin.pod \
 	    perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
 	    perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
diff --git a/win32/pod.mak b/win32/pod.mak
index f53881338b..7311b99db3 100644
--- a/win32/pod.mak
+++ b/win32/pod.mak
@@ -63,6 +63,7 @@ POD = perl.pod	\
 	perl5312delta.pod	\
 	perl5313delta.pod	\
 	perl5314delta.pod	\
+	perl5315delta.pod	\
 	perl561delta.pod	\
 	perl56delta.pod	\
 	perl581delta.pod	\
@@ -221,6 +222,7 @@ MAN = perl.man	\
 	perl5312delta.man	\
 	perl5313delta.man	\
 	perl5314delta.man	\
+	perl5315delta.man	\
 	perl561delta.man	\
 	perl56delta.man	\
 	perl581delta.man	\
@@ -379,6 +381,7 @@ HTML = perl.html	\
 	perl5312delta.html	\
 	perl5313delta.html	\
 	perl5314delta.html	\
+	perl5315delta.html	\
 	perl561delta.html	\
 	perl56delta.html	\
 	perl581delta.html	\
@@ -537,6 +540,7 @@ TEX = perl.tex	\
 	perl5312delta.tex	\
 	perl5313delta.tex	\
 	perl5314delta.tex	\
+	perl5315delta.tex	\
 	perl561delta.tex	\
 	perl56delta.tex	\
 	perl581delta.tex	\

-- 
Perl5 Master Repository



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About