develooper Front page | perl.daily-build.reports | Postings from December 2019

Smoke [blead] v5.31.6-166-gc11f14f333 FAIL(F) cygwin_nt-10.0-143933.0.7-338.x86_64 (x86_64/1 cpu[2 cores])

From:
Carlos Guevara
Date:
December 20, 2019 11:57
Subject:
Smoke [blead] v5.31.6-166-gc11f14f333 FAIL(F) cygwin_nt-10.0-143933.0.7-338.x86_64 (x86_64/1 cpu[2 cores])
Message ID:
E1iiGtq-0000C9-Dz@cjg-buster
Automated smoke report for branch blead 5.31.7 patch c11f14f333e87d882337b1655a91e10ece130c5f v5.31.6-166-gc11f14f333
cjg-cygwin: Intel(R) Core(TM) i5-4278U CPU @ 2.60GHz (GenuineIntel 2600MHz) (x86_64/1 cpu[2 cores])
    on        cygwin_nt-10.0-14393 - 3.0.7-338.x86_64
    using     gcc version 7.4.0
    smoketime 9 hours 9 minutes (average 1 hour 8 minutes)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.31.6-166-gc11f14f333  Configuration (common) -Dcc=gcc
----------- ---------------------------------------------------------
O O         
O O         -Duse64bitall
F F         -Duseithreads
F O         -Duseithreads -Duse64bitall
| +--------- -DDEBUGGING
+----------- no debugging


Locally applied patches:
    SMOKEc11f14f333e87d882337b1655a91e10ece130c5f

Testsuite was run only with 'harness'

Tests skipped on user request:
    # One test name on a line
Failures: (common-args) -Dcc=gcc
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
../dist/Time-HiRes/t/alarm.t................................FAILED
    5
    Non-zero exit status: 1

[default] -Duseithreads -Duse64bitall
../dist/Time-HiRes/t/alarm.t................................FAILED
    5, 9
    Non-zero exit status: 2

Passed Todo tests: (common-args) -Dcc=gcc
[default] 
[default] -DDEBUGGING
[default] -Duse64bitall
[default] -DDEBUGGING -Duse64bitall
[default] -Duseithreads
[default] -DDEBUGGING -Duseithreads
[default] -Duseithreads -Duse64bitall
[default] -DDEBUGGING -Duseithreads -Duse64bitall
../cpan/IO-Socket-IP/t/11sockopts.t.........................PASSED
    1-2

Compiler messages(gcc):
awk: cmd. line:1: warning: regexp escape sequence `\=' is not a known regexp operator
sv.c: In function 'Perl_sv_vcatpvfn_flags':
config.h:909:39: warning: '%.*g' directive writing between 1 and 133 bytes into a region of size 127 [-Wformat-overflow=]
perl.h:6766:13: note: in definition of macro 'WITH_LC_NUMERIC_SET_TO_NEEDED_IN'
sv.c:48:5: note: in expansion of macro 'PERL_UNUSED_RESULT'
sv.c:48:24: note: in expansion of macro 'Gconvert'
sv.c:13107:21: note: in expansion of macro 'SNPRINTF_G'
config.h:909:39: note: assuming directive output of 132 bytes
perl.h:387:62: note: '__builtin___sprintf_chk' output between 2 and 134 bytes into a destination of size 127
compress.c: In function 'BZ2_compressBlock':
compress.c:392:54: warning: 'cost[5]' may be used uninitialized in this function [-Wmaybe-uninitialized]
compress.c:256:11: note: 'cost[5]' was declared here
compress.c:402:21: warning: 'cost[3]' may be used uninitialized in this function [-Wmaybe-uninitialized]
compress.c:256:11: note: 'cost[3]' was declared here
compress.c:402:21: warning: 'cost[2]' may be used uninitialized in this function [-Wmaybe-uninitialized]
compress.c:256:11: note: 'cost[2]' was declared here
RealPPPort.c: In function 'XS_Devel__PPPort_isASCII_utf8_safe':
RealPPPort.c:4932:6: warning: unused variable 'offset' [-Wunused-variable]
RealPPPort.c: In function 'XS_Devel__PPPort_isASCII_LC_utf8_safe':
RealPPPort.c:5638:6: warning: unused variable 'offset' [-Wunused-variable]
Encode.c: In function 'XS_Encode_decode':
../../XSUB.h:185:20: warning: unused variable 'ix' [-Wunused-variable]
../../XSUB.h:185:20: note: in definition of macro 'dXSI32'
Encode.c: In function 'XS_Encode_encode':
POSIX.xs:1359:7: warning: '_tzname' redeclared without dllimport attribute: previous dllimport ignored [-Wattributes]
HiRes.xs: In function '_clock_gettime':
HiRes.xs:266:10: warning: unused variable 'ft' [-Wunused-variable]
File.xs: In function 'XS_Win32API__File_DeviceIoControl':
File.xs:244:10: warning: format '%d' expects argument of type 'int', but argument 3 has type 'STRLEN {aka long unsigned int}' [-Wformat=]
File.c: In function 'XS_Win32API__File_OsFHandleOpenFd':
File.c:1459:8: warning: variable 'uMode' set but not used [-Wunused-but-set-variable]
File.c:1458:7: warning: variable 'hOsFHandle' set but not used [-Wunused-but-set-variable]
File.xs: In function 'XS_Win32API__File_WriteFile':
File.xs:641:13: warning: format '%d' expects argument of type 'int', but argument 3 has type 'STRLEN {aka long unsigned int}' [-Wformat=]
File.xs:59:5: warning: 'ErrPrintf' defined but not used [-Wunused-function]

Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.1
(Reporter v0.053 / Smoker v0.046)



nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About