develooper Front page | perl.beginners | Postings from October 2008

Re: Help required in writing a script

Thread Previous | Thread Next
From:
monnappa appaiah
Date:
October 23, 2008 13:18
Subject:
Re: Help required in writing a script
Message ID:
33fa55730810231318o1c15b6b6sca66d5b90e1337d2@mail.gmail.com
Hi,

       i tried to install the "Expect" module........but i got the below
error msg:

cpan> m /Expect/
Going to read C:\Perl\cpan\Metadata
  Database was generated on Mon, 20 Oct 2008 08:27:31 GMT
Module    Bio::MAGE::QuantitationType::ExpectedValue
(JASONS/Bio-MAGE-20020902.6
.tar.gz)
Module    CPAN::Test::Dummy::Perl5::Make::Expect
(ANDK/CPAN-Test-Dummy-Perl5-Mak
e-Expect-1.00.tar.gz)
Module  < Expect                 (RGIERSIG/Expect-1.21.tar.gz)
Module    Expect::Angel          (MINGZHANG/Angel_002.tar.gz)
Module    Expect::Simple         (DJERIUS/Expect-Simple-0.04.tar.gz)
Module    IDS::DataSource::HTTP::Expectation (INGHAM/IDS-HTTP-1.01.tar.gz)
Module    Net::SCP::Expect       (RYBSKEJ/Net-SCP-Expect-0.14.tar.gz)
Module  = Net::SSH::Expect       (BNEGRAO/Net-SSH-Expect-1.09.tar.gz)
Module    Test::Expect           (LBROCARD/Test-Expect-0.31.tar.gz)
Module    WWW::Postini::Exception::UnexpectedResponse
(PGUZIS/WWW-Postini-0.01.t
ar.gz)
10 items found


cpan> install Expect
Running install for module 'Expect'
Running make for R/RG/RGIERSIG/Expect-1.21.tar.gz
Fetching with LWP:

http://ppm.activestate.com/CPAN/authors/id/R/RG/RGIERSIG/Expect-1.21.tar.gz
Fetching with LWP:
  http://ppm.activestate.com/CPAN/authors/id/R/RG/RGIERSIG/CHECKSUMS
Checksum for
C:\Perl\cpan\sources\authors\id\R\RG\RGIERSIG\Expect-1.21.tar.gz ok

Scanning cache C:\Perl/cpan/build for sizes
DONE
Expect-1.21/
Expect-1.21/Changes
Expect-1.21/examples/
Expect-1.21/examples/kibitz/
Expect-1.21/examples/kibitz/Changelog
Expect-1.21/examples/kibitz/kibitz
Expect-1.21/examples/kibitz/kibitz.man
Expect-1.21/examples/kibitz/README
Expect-1.21/examples/ssh.pl
Expect-1.21/Expect.pm
Expect-1.21/Expect.pod
Expect-1.21/Makefile.PL
Expect-1.21/MANIFEST
Expect-1.21/META.yml
Expect-1.21/README
Expect-1.21/test.pl
Expect-1.21/tutorial/
Expect-1.21/tutorial/1.A.Intro
Expect-1.21/tutorial/2.A.ftp
Expect-1.21/tutorial/2.B.rlogin
Expect-1.21/tutorial/3.A.debugging
Expect-1.21/tutorial/4.A.top
Expect-1.21/tutorial/5.A.top
Expect-1.21/tutorial/5.B.top
Expect-1.21/tutorial/6.A.smtp-verify
Expect-1.21/tutorial/6.B.modem-init
Expect-1.21/tutorial/README

  CPAN.pm: Going to build R/RG/RGIERSIG/Expect-1.21.tar.gz

Checking if your kit is complete...
Looks good
Warning: prerequisite IO::Pty 1.03 not found.
Warning: prerequisite IO::Tty 1.03 not found.
Writing Makefile for Expect
---- Unsatisfied dependencies detected during ----
----        RGIERSIG/Expect-1.21.tar.gz       ----
    IO::Pty [requires]
    IO::Tty [requires]
Running make test
  Delayed until after prerequisites
Running make install
  Delayed until after prerequisites
Running install for module 'IO::Pty'
Running make for R/RG/RGIERSIG/IO-Tty-1.07.tar.gz
Fetching with LWP:

http://ppm.activestate.com/CPAN/authors/id/R/RG/RGIERSIG/IO-Tty-1.07.tar.gz
Checksum for
C:\Perl\cpan\sources\authors\id\R\RG\RGIERSIG\IO-Tty-1.07.tar.gz ok

IO-Tty-1.07/
IO-Tty-1.07/ChangeLog
IO-Tty-1.07/Makefile.PL
IO-Tty-1.07/MANIFEST
IO-Tty-1.07/META.yml
IO-Tty-1.07/Pty.pm
IO-Tty-1.07/README
IO-Tty-1.07/test.pl
IO-Tty-1.07/try
IO-Tty-1.07/Tty.pm
IO-Tty-1.07/Tty.xs

  CPAN.pm: Going to build R/RG/RGIERSIG/IO-Tty-1.07.tar.gz

Now let's see what we can find out about your system
(logfiles of failing tests are available in the conf/ dir)...

ERROR: cannot run the configured compiler 'cl'
(see conf/compilerok.log). Suggestions:
1) The complier 'cl' is not in your PATH. Add it
   to the PATH and try again. OR
2) The compiler isn't installed on your system. Install it. OR
3) You only have a different compiler installed (e.g. 'gcc').
   Either fix the compiler config in the perl Config.pm
   or install a perl that was built with the right compiler
   (you could build perl yourself with the available compiler).

Note: this is a system-administration issue, please ask your local
admin for help. Thank you.

Warning: No success on command[C:\Perl\bin\perl.exe Makefile.PL
INSTALLDIRS=site
]
  RGIERSIG/IO-Tty-1.07.tar.gz
  C:\Perl\bin\perl.exe Makefile.PL INSTALLDIRS=site -- NOT OK
Running make test
  Make had some problems, won't test
Running make install
  Make had some problems, won't install
Running install for module 'IO::Tty'
Running make for R/RG/RGIERSIG/IO-Tty-1.07.tar.gz
  Has already been unwrapped into directory
C:\Perl\cpan\build\IO-Tty-1.07-ZOJv0
E
  'C:\Perl\bin\perl.exe Makefile.PL INSTALLDIRS=site' returned status 512,
won't
 make
Running make test
  Make had some problems, won't test
Running make install
  Make had some problems, won't install
Running make for R/RG/RGIERSIG/Expect-1.21.tar.gz
  Has already been unwrapped into directory
C:\Perl\cpan\build\Expect-1.21-9rXmi
o

  CPAN.pm: Going to build R/RG/RGIERSIG/Expect-1.21.tar.gz

Warning: Prerequisite 'IO::Pty => 1.03' for
'R/RG/RGIERSIG/Expect-1.21.tar.gz' f
ailed when processing 'R/RG/RGIERSIG/IO-Tty-1.07.tar.gz' with 'writemakefile
=>
NO 'C:\Perl\bin\perl.exe Makefile.PL INSTALLDIRS=site' returned status 512'.
Con
tinuing, but chances to succeed are limited.
Warning: Prerequisite 'IO::Tty => 1.03' for
'R/RG/RGIERSIG/Expect-1.21.tar.gz' f
ailed when processing 'R/RG/RGIERSIG/IO-Tty-1.07.tar.gz' with 'writemakefile
=>
NO 'C:\Perl\bin\perl.exe Makefile.PL INSTALLDIRS=site' returned status 512'.
Con
tinuing, but chances to succeed are limited.
'nmake' is not recognized as an internal or external command,
operable program or batch file.
  RGIERSIG/Expect-1.21.tar.gz
  nmake -- NOT OK
Running make test
  Can't test without successful make
Running make install
  Make had returned bad status, install seems impossible
Failed during this command:
 RGIERSIG/Expect-1.21.tar.gz                  : make NO
 RGIERSIG/IO-Tty-1.07.tar.gz                  : writemakefile NO
'C:\Perl\bin\pe
rl.exe Makefile.PL INSTALLDIRS=site' returned status 512



can someone help me install this module under windows

Thanks,
Monnappa



On Thu, Oct 23, 2008 at 10:28 PM, Chas. Owens <chas.owens@gmail.com> wrote:

> On Thu, Oct 23, 2008 at 10:49, monnappa appaiah <monnappa22@gmail.com>
> wrote:
> > i want to run specific commands and the output of those shud be put into
> a
> > file.
> snip
>
> So, you will need to learn to use:
>
> Net::SSH (if you want to use keys, this is preferable) -
> http://search.cpan.org/dist/Net-SSH/SSH.pm
>
> or
>
> Net::SSH::Expect (if you want to use passwords) -
> http://search.cpan.org/dist/Net-SSH-Expect/lib/Net/SSH/Expect.pod
>
> and
>
> IO::File - http://perldoc.perl.org/IO/File.html
> fork - http://perldoc.perl.org/functions/fork.html
> wait - http://perldoc.perl.org/functions/wait.html
> warn - http://perldoc.perl.org/functions/warn.html
> die - http://perldoc.perl.org/functions/die.html
> exit - http://perldoc.perl.org/functions/exit.html
> next - http://perldoc.perl.org/functions/next.html
> for(each), while, and until loops and if statements -
> http://perldoc.perl.org/perlsyn.html#Compound-Statements
>
> --
> Chas. Owens
> wonkden.net
> The most important skill a programmer can have is the ability to read.
>

Thread Previous | Thread Next


nntp.perl.org: Perl Programming lists via nntp and http.
Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About