Front page | perl.daily-build.reports |
Postings from April 2011
Automated smoke report for 5.14.0 patch ff3f26d2308508ca78054f72cc6eb2819386898d v5.13.11-410-gff3f26d
p5openbsd: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) (909 MHz) (i386/1 cpu)
on openbsd - 4.8
using cc version 4.2.1 20070719
smoketime 17 hours 29 minutes (average 2 hours 11 minutes)
Summary: FAIL(F)
O = OK F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during: - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
v5.13.11-410-gff3f26d Configuration (common) none
----------- ---------------------------------------------------------
O O O O
O O O O -Duse64bitint
F F F F -Duseithreads
F F F F -Duseithreads -Duse64bitint
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio
Locally applied patches:
RC0
uncommitted-changes
SMOKEff3f26d2308508ca78054f72cc6eb2819386898d
Failures: (common-args) none
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/op/sigdispatch.t.......................................FAILED
Bad plan. You planned 15 tests but ran 0.
Compiler messages(gcc):
Configure .../tmp//ccQvgdHj.o(.text+0x29): In function `xxx':
/tmp//ccsz9rwE.o(.text+0x159): In function `main':
sv.o(.text+0x4e0d): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x4e0d): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x775): In function `XS_DynaLoader_dl_load_file':
util.o(.text+0x2fc): In function `savestr':
str.o(.text+0x479): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x4e0d): In function `Perl_sv_2pv_flags':
Configure .../tmp//cc68zEWb.o(.text+0x29): In function `xxx':
/home/sts/source/p5-current/UU/try.c:29: warning: vsprintf() is often misused, please use vsnprintf()
/tmp//ccLo4Fpj.o(.text+0x159): In function `main':
/home/sts/source/p5-current/UU/try.c:52: warning: sprintf() is often misused, please use snprintf()
sv.o(.text+0x1532f): In function `Perl_sv_2pv_flags':
/home/sts/source/p5-current/sv.c:2762: warning: sprintf() is often misused, please use snprintf()
libperl.a(sv.o)(.text+0x1532f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x172a): In function `XS_DynaLoader_dl_load_file':
/home/sts/source/p5-current/ext/DynaLoader/DynaLoader.xs:174: warning: strcat() is almost always misused, please use strlcat()
util.o(.text+0x40c): In function `savestr':
/home/sts/source/p5-current/x2p/util.c:147: warning: strcpy() is almost always misused, please use strlcpy()
str.o(.text+0x483): In function `str_2ptr':
/home/sts/source/p5-current/x2p/str.c:32: warning: sprintf() is often misused, please use snprintf()
../libperl.a(sv.o)(.text+0x1532f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccKxdQGT.o(.text+0x29): In function `xxx':
/tmp//ccRx0wSC.o(.text+0x159): In function `main':
sv.o(.text+0x509f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x509f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x785): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x509f): In function `Perl_sv_2pv_flags':
Configure .../tmp//cc23EhOF.o(.text+0x29): In function `xxx':
/tmp//cc7WSj49.o(.text+0x159): In function `main':
sv.o(.text+0xe1a4): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0xe1a4): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x174a): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0xe1a4): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccQySaMk.o(.text+0x29): In function `xxx':
/tmp//ccA1oKmQ.o(.text+0x159): In function `main':
sv.o(.text+0x8017): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x8017): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8c7): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x8017): In function `Perl_sv_2pv_flags':
Configure .../tmp//cc6iS7QL.o(.text+0x29): In function `xxx':
/tmp//ccUCGzL5.o(.text+0x159): In function `main':
sv.o(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x19e8): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x1ac8f): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccBXimwO.o(.text+0x29): In function `xxx':
/tmp//ccvZPdG5.o(.text+0x159): In function `main':
sv.o(.text+0x8332): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x8332): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x8d7): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x8332): In function `Perl_sv_2pv_flags':
Configure .../tmp//ccBBnRU5.o(.text+0x29): In function `xxx':
/tmp//cc1LFFFw.o(.text+0x159): In function `main':
sv.o(.text+0x13264): In function `Perl_sv_2pv_flags':
libperl.a(sv.o)(.text+0x13264): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x1a08): In function `XS_DynaLoader_dl_load_file':
../libperl.a(sv.o)(.text+0x13264): In function `Perl_sv_2pv_flags':
--
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)