Front page | perl.cpan.testers |
Postings from January 2008
FAIL Acme-Geo-Whitwell-Name-0.01 i386-freebsd-thread-multi-64int6.2-release
Thread Previous
From:
chris
Date:
January 8, 2008 00:44
Subject:
FAIL Acme-Geo-Whitwell-Name-0.01 i386-freebsd-thread-multi-64int6.2-release
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear MCMAHON,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Jan 8 08:24:11 2008] Trying to get 'http://www.cpan.org/authors/id/M/MC/MCMAHON/Acme-Geo-Whitwell-Name-0.01.tar.gz'
[MSG] [Tue Jan 8 08:24:11 2008] Trying to get 'http://www.cpan.org/authors/id/M/MC/MCMAHON/CHECKSUMS'
[MSG] [Tue Jan 8 08:24:12 2008] Checksum matches for 'Acme-Geo-Whitwell-Name-0.01.tar.gz'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/.cvsignore'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/Changes'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/Geo/'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/Geo/Whitwell/'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/lib/Acme/Geo/Whitwell/Name.pm'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/Makefile.PL'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/MANIFEST'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/META.yml'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/README'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/00-load.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/boilerplate.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/build.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/coord_for.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/exceptions.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/pod-coverage.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/pod.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/two_decimal.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme-Geo-Whitwell-Name-0.01/t/whitwell.t'
[MSG] [Tue Jan 8 08:24:13 2008] Extracted 'Acme::Geo::Whitwell::Name' to '/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01'
[MSG] [Tue Jan 8 08:24:14 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Acme::Geo::Whitwell::Name
[MSG] [Tue Jan 8 08:24:14 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jan 8 08:24:17 2008] cp lib/Acme/Geo/Whitwell/Name.pm blib/lib/Acme/Geo/Whitwell/Name.pm
Manifying blib/man3/Acme::Geo::Whitwell::Name.3
[ERROR] [Tue Jan 8 08:24:20 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...........# Testing Acme::Geo::Whitwell::Name 0.01, Perl 5.008008, /usr/home/cpan/perl588/bin/perl
ok
t/boilerplate.......ok
t/build.............ok
t/coord_for.........Can't locate Test/Exception.pm in @INC (@INC contains: /usr/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /usr/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib /home/cpan/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-freebsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/coord_for.t line 2.
BEGIN failed--compilation aborted at t/coord_for.t line 2.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/exceptions........Can't locate Test/Exception.pm in @INC (@INC contains: /usr/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /usr/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib /home/cpan/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-freebsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/exceptions.t line 2.
BEGIN failed--compilation aborted at t/exceptions.t line 2.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/10 subtests
t/pod-coverage......skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod...............skipped: Test::Pod 1.22 required for testing POD
t/two_decimal.......Can't locate Test/Exception.pm in @INC (@INC contains: /usr/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /usr/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/lib /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib /home/cpan/perl588/lib/5.8.8/i386-freebsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-freebsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/two_decimal.t line 2.
BEGIN failed--compilation aborted at t/two_decimal.t line 2.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 72/72 subtests
t/whitwell..........ok
Test Summary Report
-------------------
t/coord_for.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/exceptions.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 10 tests but ran 0.
t/two_decimal.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 72 tests but ran 0.
Files=9, Tests=56, 2 wallclock secs ( 0.03 usr 0.45 sys + 0.25 cusr 1.20 csys = 1.94 CPU)
Result: FAIL
Failed 3/9 test programs. 0/56 subtests failed.
*** Error code 255
Stop in /usr/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01.
[MSG] [Tue Jan 8 08:24:20 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Test::Exception
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'MCMAHON (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Test::Exception' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.72 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/cpan/bin
PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Acme-Geo-Whitwell-Name-0.01/blib
PERL5_CPANPLUS_IS_RUNNING = 74107
PERL5_CPANPLUS_IS_VERSION = 0.82
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/perl588/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 20 2 20 20
EGID: $) = 20 2 20 20
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=freebsd, osvers=6.2-release, archname=i386-freebsd-thread-multi-64int
uname='freebsd forneus.bingosnet.co.uk 6.2-release freebsd 6.2-release #0: fri jan 12 10:40:27 utc 2007 root@dessler.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='3.4.6 [FreeBSD] 20060305', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt -lutil -lc_r
perllibs=-lm -lcrypt -lutil -lc_r
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Previous