FAIL Video-Xine-0.10 i386-netbsd-thread-multi-64int 4.0

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear STEPHEN,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Jan  3 23:24:11 2008] Trying to get 'http://www.cpan.org/authors/id/S/ST/STEPHEN/CHECKSUMS'
[MSG] [Thu Jan  3 23:34:21 2008] Checksum matches for 'Video-Xine-0.10.tar.gz'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/ChangeLog'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/MANIFEST'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/Build.PL'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/README'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/t/'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/t/test.ogg'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/t/test_config'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/t/Video-Xine.t'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/t/X11.t'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/t/Event.t'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/t/time_015.avi'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/typemap'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/lib/'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/lib/Video/'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/lib/Video/ppport.h'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/lib/Video/Xine.pm'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/lib/Video/Xine.xs'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/inc/'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/inc/Devel/'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/inc/Devel/CheckLib.pm'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video-Xine-0.10/META.yml'
[MSG] [Thu Jan  3 23:34:22 2008] Extracted 'Video::Xine' to '/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10'
[ERROR] [Thu Jan  3 23:34:22 2008] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Thu Jan  3 23:34:22 2008] No 'Makefile.PL' found - attempting to generate one
[MSG] [Thu Jan  3 23:34:23 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Video::Xine

[MSG] [Thu Jan  3 23:34:23 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Jan  3 23:34:25 2008] cp lib/Video/Xine.pm blib/lib/Video/Xine.pm
cp lib/Video/Xine.xs blib/lib/Video/Xine.xs
cp lib/Video/ppport.h blib/lib/Video/ppport.h
Manifying blib/man3/Video::Xine.3

[ERROR] [Thu Jan  3 23:34:27 2008] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/cpan/perl5.8.8/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/Event...........Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cpan/perl5.8.8/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/5.8.8 /home/cpan/perl5.8.8/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/site_perl/5.8.8 /home/cpan/perl5.8.8/lib/site_perl .) at t/Event.t line 6
Compilation failed in require at t/Event.t line 6.
BEGIN failed--compilation aborted at t/Event.t line 6.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/1 subtests 
t/Video-Xine......
#   Failed test 'use Video::Xine;'
#   in t/Video-Xine.t at line 7.
#     Tried to use 'Video::Xine'.
#     Error:  Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cpan/perl5.8.8/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/5.8.8 /home/cpan/perl5.8.8/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/site_perl/5.8.8 /home/cpan/perl5.8.8/lib/site_perl .) at (eval 5) line 2
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at t/Video-Xine.t line 7.
Bareword "XINE_ENGINE_PARAM_VERBOSITY" not allowed while "strict subs" in use at t/Video-Xine.t line 15.
Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 33.
Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 41.
Bareword "XINE_STATUS_STOP" not allowed while "strict subs" in use at t/Video-Xine.t line 43.
Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 45.
Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 55.
Bareword "XINE_ERROR_NO_INPUT_PLUGIN" not allowed while "strict subs" in use at t/Video-Xine.t line 65.
Execution of t/Video-Xine.t aborted due to compilation errors.
# Looks like you planned 11 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 11/11 subtests 
t/X11.............Can't locate loadable object for module Video::Xine in @INC (@INC contains: /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib /home/cpan/perl5.8.8/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/5.8.8 /home/cpan/perl5.8.8/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl5.8.8/lib/site_perl/5.8.8 /home/cpan/perl5.8.8/lib/site_perl .) at t/X11.t line 7
Compilation failed in require at t/X11.t line 7.
BEGIN failed--compilation aborted at t/X11.t line 7.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/1 subtests 

Test Summary Report
-------------------
t/Event.t     (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
t/Video-Xine.t (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 11 tests but ran 1.
t/X11.t       (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
Files=3, Tests=1,  2 wallclock secs ( 0.07 usr  0.15 sys +  0.25 cusr  0.72 csys =  1.19 CPU)
Result: FAIL
Failed 3/3 test programs. 1/1 subtests failed.
*** Error code 255

Stop.
make: stopped in /home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10

[MSG] [Thu Jan  3 23:34:27 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/lib:/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib/arch:/home/cpan/perl5.8.8/.cpanplus/5.8.8/build/Video-Xine-0.10/blib
    PERL5_CPANPLUS_IS_RUNNING = 16609
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl5.8.8/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=netbsd, osvers=4.0, archname=i386-netbsd-thread-multi-64int
    uname='netbsd diafol.bingosnet.co.uk 4.0 netbsd 4.0 (generic) #0: sun dec 16 00:20:10 pst 2007 builds@wb34:homebuildsabnetbsd-4-0-releasei386200712160005z-objhomebuildsabnetbsd-4-0-releasesrcsysarchi386compilegeneric i386 '
    config_args='-e -Dprefix=/home/cpan/perl5.8.8 -Dusethreads -Duse64bitint -Dusemymalloc=n'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/pkg/include'
    ccversion='', gccversion='4.1.2 20061021 prerelease (NetBSD nb3 20061125)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lm -lcrypt -lutil -lc -lposix -lpthread
    perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  -L/usr/pkg/lib'

• FAIL Video-Xine-0.10 i386-netbsd-thread-multi-64int 4.0 by chris