Front page | perl.cpan.testers |
Postings from January 2008
FAIL Video-Xine-0.09 sparc64-netbsd-thread-multi 4.0_rc5
From:
salvacpan
Date:
January 2, 2008 04:06
Subject:
FAIL Video-Xine-0.09 sparc64-netbsd-thread-multi 4.0_rc5
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear STEPHEN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Jan 1 22:31:09 2008] Trying to get 'ftp://ftp.rediris.es/mirror/CPAN/authors/id/S/ST/STEPHEN/Video-Xine-0.09.tar.gz'
[MSG] [Tue Jan 1 22:31:17 2008] Trying to get 'ftp://ftp.rediris.es/mirror/CPAN/authors/id/S/ST/STEPHEN/CHECKSUMS'
[MSG] [Tue Jan 1 22:31:18 2008] Checksum matches for 'Video-Xine-0.09.tar.gz'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/ChangeLog'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/MANIFEST'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/Build.PL'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/README'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/t/'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/t/test.ogg'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/t/test_config'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/t/Video-Xine.t'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/t/X11.t'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/t/Event.t'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/t/time_015.avi'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/typemap'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/Makefile.PL'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/lib/'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/lib/Video/'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/lib/Video/ppport.h'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/lib/Video/Xine.pm'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/lib/Video/Xine.xs'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/inc/'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/inc/Devel/'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/inc/Devel/CheckLib.pm'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video-Xine-0.09/META.yml'
[MSG] [Tue Jan 1 22:31:19 2008] Extracted 'Video::Xine' to '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.09'
[MSG] [Tue Jan 1 22:31:32 2008] # running Build.PL
/home/cpantest/perl/5.10.0-thread-multi//bin/perl Build.PL
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Creating new 'Build' script for 'Video-Xine' version '0.09'
[MSG] [Tue Jan 1 22:31:32 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jan 1 22:31:56 2008] /home/cpantest/perl/5.10.0-thread-multi//bin/perl Build --makefile_env_macros 1
Copying lib/Video/Xine.pm -> blib/lib/Video/Xine.pm
lib/Video/Xine.xs -> lib/Video/Xine.c
cc -I/home/cpantest/perl/5.10.0-thread-multi/lib/5.10.0/sparc64-netbsd-thread-multi/CORE -DXS_VERSION="0.09" -DVERSION="0.09" -DPIC -fPIC -I/usr/pkg/include -pthread -c -fno-strict-aliasing -pipe -I/usr/pkg/include -O -o lib/Video/Xine.o lib/Video/Xine.c
ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/Video/Xine/Xine.bs')
cc --whole-archive -shared -L/usr/pkg/lib -o blib/arch/auto/Video/Xine/Xine.so lib/Video/Xine.o -L/usr/pkg/lib -lxine -lz -lresolv -lrt
Manifying blib/lib/Video/Xine.pm -> blib/libdoc/Video::Xine.3
[ERROR] [Tue Jan 1 22:32:24 2008] MAKE TEST failed: Illegal seek /home/cpantest/perl/5.10.0-thread-multi//bin/perl Build --makefile_env_macros 1 test
t/Event........... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Can't load '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.09/blib/arch/auto/Video/Xine/Xine.so' for module Video::Xine: Shared object "libxine.so.1" not found at /home/cpantest/perl/5.10.0-thread-multi//lib/5.10.0/sparc64-netbsd-thread-multi/DynaLoader.pm line 203.
at t/Event.t line 6
Compilation failed in require at t/Event.t line 6.
BEGIN failed--compilation aborted at t/Event.t line 6.
# Looks like your test died before it could output anything.
t/Video-Xine...... Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 11/11 subtests
# Failed test 'use Video::Xine;'
# at t/Video-Xine.t line 7.
# Tried to use 'Video::Xine'.
# Error: Can't load '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.09/blib/arch/auto/Video/Xine/Xine.so' for module Video::Xine: Shared object "libxine.so.1" not found at /home/cpantest/perl/5.10.0-thread-multi//lib/5.10.0/sparc64-netbsd-thread-multi/DynaLoader.pm line 203.
# at (eval 5) line 2
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.
Bareword "XINE_ENGINE_PARAM_VERBOSITY" not allowed while "strict subs" in use at t/Video-Xine.t line 15.
Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 33.
Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 41.
Bareword "XINE_STATUS_STOP" not allowed while "strict subs" in use at t/Video-Xine.t line 43.
Bareword "XINE_STATUS_IDLE" not allowed while "strict subs" in use at t/Video-Xine.t line 45.
Bareword "XINE_STATUS_PLAY" not allowed while "strict subs" in use at t/Video-Xine.t line 55.
Bareword "XINE_ERROR_NO_INPUT_PLUGIN" not allowed while "strict subs" in use at t/Video-Xine.t line 65.
Execution of t/Video-Xine.t aborted due to compilation errors.
# Looks like you planned 11 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
t/X11............. Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/Event.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/Video-Xine.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 11 tests but ran 1.
t/X11.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=3, Tests=1, 9 wallclock secs ( 0.19 usr 0.37 sys + 2.52 cusr 6.32 csys = 9.40 CPU)
Result: FAIL
Can't load '/home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.09/blib/arch/auto/Video/Xine/Xine.so' for module Video::Xine: Shared object "libxine.so.1" not found at /home/cpantest/perl/5.10.0-thread-multi//lib/5.10.0/sparc64-netbsd-thread-multi/DynaLoader.pm line 203.
at t/X11.t line 7
Compilation failed in require at t/X11.t line 7.
BEGIN failed--compilation aborted at t/X11.t line 7.
# Looks like your test died before it could output anything.
Failed 3/3 test programs. 1/1 subtests failed.
*** Error code 255
Stop.
make: stopped in /home/cpantest/perl/5.10.0-thread-multi/var/cpanplus/5.10.0/build/Video-Xine-0.09
[MSG] [Tue Jan 1 22:32:24 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::CBuilder 0.21 0
Module::Build 0.2808_01 0
Test::More 0.74 0.01
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=netbsd, osvers=4.0_rc5, archname=sparc64-netbsd-thread-multi
uname='netbsd boletus.int.qindel.com 4.0_rc5 netbsd 4.0_rc5 (sunblade100) #3: mon dec 10 16:36:36 cet 2007 root@:usrsrcsysarchsparc64compilesunblade100 sparc64 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='4.1.2 20061021 prerelease (NetBSD nb3 20061125)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
-
FAIL Video-Xine-0.09 sparc64-netbsd-thread-multi 4.0_rc5
by salvacpan