Front page | perl.cpan.testers |
Postings from January 2008
FAIL Apache2-Tail-0.03 OpenBSD.i386-openbsd-thread-multi-64int 4.2
Thread Next
From:
chris
Date:
January 1, 2008 08:53
Subject:
FAIL Apache2-Tail-0.03 OpenBSD.i386-openbsd-thread-multi-64int 4.2
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear GOZER,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Jan 1 07:53:34 2008] Trying to get 'http://www.cpan.org/authors/id/G/GO/GOZER/Apache2-Tail-0.03.tar.gz'
[MSG] [Tue Jan 1 07:53:37 2008] Trying to get 'http://www.cpan.org/authors/id/G/GO/GOZER/CHECKSUMS'
[MSG] [Tue Jan 1 07:53:39 2008] Checksum matches for 'Apache2-Tail-0.03.tar.gz'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/Changes'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/lib/'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/lib/Apache2/'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/lib/Apache2/Tail.pm'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/Makefile.PL'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/MANIFEST'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/MANIFEST.SKIP'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/META.yml'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/README'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/SIGNATURE'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/00-signature.t'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/01compile.t'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/02simple.t'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/03pod-cover.t'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/03pod.t'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/conf/'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2-Tail-0.03/t/conf/extra.last.conf.in'
[MSG] [Tue Jan 1 07:53:40 2008] Extracted 'Apache2::Tail' to '/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03'
[MSG] [Tue Jan 1 07:53:42 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite File::Tail 0 not found.
Warning: prerequisite mod_perl2 0 not found.
Writing Makefile for Apache2::Tail
[MSG] [Tue Jan 1 07:53:42 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jan 1 07:53:42 2008] Module 'Apache2::Tail' requires 'File::Tail' version '0' to be installed
[MSG] [Tue Jan 1 07:53:42 2008] Module 'Apache2::Tail' requires 'mod_perl2' version '0' to be installed
[MSG] [Tue Jan 1 07:53:42 2008] Trying to get 'http://www.cpan.org/authors/id/M/MG/MGRABNAR/File-Tail-0.99.3.tar.gz'
[MSG] [Tue Jan 1 07:53:44 2008] Trying to get 'http://www.cpan.org/authors/id/M/MG/MGRABNAR/CHECKSUMS'
[MSG] [Tue Jan 1 07:53:44 2008] Checksum matches for 'File-Tail-0.99.3.tar.gz'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/META.yml'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/t/'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/t/20tail.t'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/t/30name_change.t'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/t/10open.t'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/select_demo'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/Tail.pm.debug'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/Changes'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/logwatch'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/MANIFEST'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/Tail.pm'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/Makefile.PL'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File-Tail-0.99.3/README'
[MSG] [Tue Jan 1 07:53:45 2008] Extracted 'File::Tail' to '/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3'
[MSG] [Tue Jan 1 07:53:47 2008]
File::Tail will be installed without debugging information.
This information isn't usefull unless you intend to tinker
with the code. To install with debugging enabled, use:
perl Makefile.PL LOGIT
Checking if your kit is complete...
Looks good
Writing Makefile for File::Tail
[MSG] [Tue Jan 1 07:53:47 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jan 1 07:53:51 2008] cp Tail.pm blib/lib/File/Tail.pm
Manifying blib/man3/File::Tail.3
[MSG] [Tue Jan 1 07:54:50 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/10open.............ok
t/20tail.............ok
t/30name_change......ok
All tests successful.
Files=3, Tests=15, 58 wallclock secs ( 0.00 usr 0.17 sys + 0.33 cusr 0.76 csys = 1.26 CPU)
Result: PASS
[MSG] [Tue Jan 1 07:54:50 2008] Sending test report for 'File-Tail-0.99.3'
[MSG] [Tue Jan 1 07:54:50 2008] Successfully sent 'pass' report for 'File-Tail-0.99.3'
[MSG] [Tue Jan 1 07:54:50 2008] Prereq mod_perl-2.0.3 is excluded
[MSG] [Tue Jan 1 07:54:50 2008] Will not install prerequisite 'mod_perl2' -- Note that the overall install may fail due to this
[MSG] [Tue Jan 1 07:54:54 2008] cp lib/Apache2/Tail.pm blib/lib/Apache2/Tail.pm
Manifying blib/man3/Apache2::Tail.3
[ERROR] [Tue Jan 1 07:54:57 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-signature......ok
t/01compile.........
# Failed test 'require Apache2::Tail;'
# at t/01compile.t line 5.
# Tried to require 'Apache2::Tail'.
# Error: Can't locate Apache2/RequestIO.pm in @INC (@INC contains: /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib /home/cpan/perl5.10.0/lib/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl5.10.0/lib/5.10.0 /home/cpan/perl5.10.0/lib/site_perl/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl5.10.0/lib/site_perl/5.10.0 .) at /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/lib/Apache2/Tail.pm line 8.
# BEGIN failed--compilation aborted at /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/lib/Apache2/Tail.pm line 8.
# Compilation failed in require at (eval 3) line 2.
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/02simple..........skipped: No Apache::Test
t/03pod-cover.......skipped: Test::Pod::Coverage 1.00 required for testing POD coverage
t/03pod.............skipped: Test::Pod 1.00 required for testing POD
Test Summary Report
-------------------
t/01compile.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 1
Files=5, Tests=2, 2 wallclock secs ( 0.04 usr 0.37 sys + 0.17 cusr 1.06 csys = 1.64 CPU)
Result: FAIL
Failed 1/5 test programs. 1/2 subtests failed.
*** Error code 255
Stop in /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03 (line 770 of Makefile).
[MSG] [Tue Jan 1 07:54:57 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Apache2::RequestIO
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'GOZER (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Apache2::RequestIO' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
CGI 3.29 0
File::Tail 0.99.3 0
Test::More 0.72 0
! mod_perl2 0 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/File-Tail-0.99.3/blib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Apache2-Tail-0.03/blib
PERL5_CPANPLUS_IS_RUNNING = 13502
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/ksh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl5.10.0/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 1000 1000 0
EGID: $) = 1000 1000 0
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi-64int
uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 '
config_args='-de -Dprefix=/home/cpan/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
Thread Next