Front page | perl.cpan.testers |
Postings from December 2007
FAIL Apache2-Tail-0.03 i686-linux-thread-multi-64int-ld 2.6.21.5-smp
Thread Previous
From:
chris
Date:
December 31, 2007 20:14
Subject:
FAIL Apache2-Tail-0.03 i686-linux-thread-multi-64int-ld 2.6.21.5-smp
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear GOZER,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_08. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Dec 31 17:32:47 2007] Trying to get 'http://www.cpan.org/authors/id/G/GO/GOZER/CHECKSUMS'
[MSG] [Mon Dec 31 17:32:48 2007] Checksum matches for 'Apache2-Tail-0.03.tar.gz'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/Changes'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/lib/'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/lib/Apache2/'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/lib/Apache2/Tail.pm'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/Makefile.PL'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/MANIFEST'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/MANIFEST.SKIP'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/META.yml'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/README'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/SIGNATURE'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/00-signature.t'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/01compile.t'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/02simple.t'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/03pod-cover.t'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/03pod.t'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/conf/'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2-Tail-0.03/t/conf/extra.last.conf.in'
[MSG] [Mon Dec 31 17:32:49 2007] Extracted 'Apache2::Tail' to '/home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03'
[MSG] [Mon Dec 31 17:32:51 2007] WARNING: LICENSE is not a known parameter.
Checking if your kit is complete...
Looks good
Warning: prerequisite File::Tail 0 not found.
Warning: prerequisite mod_perl2 0 not found.
'LICENSE' is not a known MakeMaker parameter name.
Writing Makefile for Apache2::Tail
[MSG] [Mon Dec 31 17:32:51 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Dec 31 17:32:51 2007] Module 'Apache2::Tail' requires 'File::Tail' version '0' to be installed
[MSG] [Mon Dec 31 17:32:51 2007] Module 'Apache2::Tail' requires 'mod_perl2' version '0' to be installed
[MSG] [Mon Dec 31 17:32:51 2007] Trying to get 'http://www.cpan.org/authors/id/M/MG/MGRABNAR/CHECKSUMS'
[MSG] [Mon Dec 31 17:32:51 2007] Checksum matches for 'File-Tail-0.99.3.tar.gz'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/META.yml'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/t/'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/t/20tail.t'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/t/30name_change.t'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/t/10open.t'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/select_demo'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/Tail.pm.debug'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/Changes'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/logwatch'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/MANIFEST'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/Tail.pm'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/Makefile.PL'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File-Tail-0.99.3/README'
[MSG] [Mon Dec 31 17:32:51 2007] Extracted 'File::Tail' to '/home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3'
[MSG] [Mon Dec 31 17:32:52 2007]
File::Tail will be installed without debugging information.
This information isn't usefull unless you intend to tinker
with the code. To install with debugging enabled, use:
perl Makefile.PL LOGIT
Checking if your kit is complete...
Looks good
Writing Makefile for File::Tail
[MSG] [Mon Dec 31 17:32:52 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Dec 31 17:32:56 2007] cp Tail.pm blib/lib/File/Tail.pm
Manifying blib/man3/File::Tail.3
[MSG] [Mon Dec 31 17:34:01 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl5.08.08/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/10open.............ok
t/20tail.............ok
t/30name_change......ok
All tests successful.
Files=3, Tests=15, 64 wallclock secs ( 0.00 usr 0.05 sys + 0.13 cusr 0.12 csys = 0.30 CPU)
Result: PASS
[MSG] [Mon Dec 31 17:34:02 2007] Sending test report for 'File-Tail-0.99.3'
[MSG] [Mon Dec 31 17:34:24 2007] Successfully sent 'pass' report for 'File-Tail-0.99.3'
[MSG] [Mon Dec 31 17:34:24 2007] Prereq mod_perl-2.0.3 is excluded
[MSG] [Mon Dec 31 17:34:24 2007] Will not install prerequisite 'mod_perl2' -- Note that the overall install may fail due to this
[MSG] [Mon Dec 31 17:34:28 2007] cp lib/Apache2/Tail.pm blib/lib/Apache2/Tail.pm
Manifying blib/man3/Apache2::Tail.3
[ERROR] [Mon Dec 31 17:34:31 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.08.08/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-signature......ok
t/01compile.........
# Failed test 'require Apache2::Tail;'
# in t/01compile.t at line 5.
# Tried to require 'Apache2::Tail'.
# Error: Can't locate Apache2/RequestIO.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/lib /home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/arch /home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/lib /home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/arch /home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib /home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/lib /home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/arch /home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib /home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/lib /home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/arch /home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib /home/cpan/perl5.08.08/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/5.8.8 /home/cpan/perl5.08.08/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl5.08.08/lib/site_perl/5.8.8 /home/cpan/perl5.08.08/lib/site_perl .) at /home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/lib/Apache2/Tail.pm line 8.
# BEGIN failed--compilation aborted at /home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/lib/Apache2/Tail.pm line 8.
# Compilation failed in require at (eval 3) line 2.
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/02simple..........skipped: No Apache::Test
t/03pod-cover.......skipped: Test::Pod::Coverage 1.00 required for testing POD coverage
t/03pod.............skipped: Test::Pod 1.00 required for testing POD
Test Summary Report
-------------------
t/01compile.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 1
Files=5, Tests=2, 1 wallclock secs ( 0.02 usr 0.09 sys + 0.26 cusr 0.16 csys = 0.53 CPU)
Result: FAIL
Failed 1/5 test programs. 1/2 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Mon Dec 31 17:34:31 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Apache2::RequestIO
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'GOZER (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Apache2::RequestIO' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
CGI 3.15 0
File::Tail 0.99.3 0
Test::More 0.62 0
! mod_perl2 0 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib/java/bin:/usr/lib/java/jre/bin:.
PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/lib:/home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/arch:/home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib:/home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/lib:/home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib/arch:/home/cpan/.cpanplus/5.8.8/build/File-Tail-0.99.3/blib:/home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Apache2-Tail-0.03/blib
PERL5_CPANPLUS_IS_RUNNING = 576
PERL5_CPANPLUS_IS_VERSION = 0.83_08
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl5.08.08/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100 83 19 18 17 11
EGID: $) = 100 100 83 19 18 17 11
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.21.5-smp, archname=i686-linux-thread-multi-64int-ld
uname='linux penguin 2.6.21.5-smp #2 smp tue jun 19 14:58:11 cdt 2007 i686 amd athlon(tm) 64 processor 3000+ authenticamd gnulinux '
config_args='-de -Dprefix=/home/cpan/perl5.08.08 -Dusethreads -Duse64bitint -Duselongdouble -Dusemymalloc'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=define
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.5.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.5'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Thread Previous