Front page | perl.cpan.testers |
Postings from December 2007
FAIL C-Analyzer-0.10 i386-freebsd-thread-multi-64int 6.2-release
Thread Next
From:
chris
Date:
December 27, 2007 15:25
Subject:
FAIL C-Analyzer-0.10 i386-freebsd-thread-multi-64int 6.2-release
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear SREEKANTH,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Dec 27 14:48:14 2007] Trying to get 'http://www.cpan.org/authors/id/S/SR/SREEKANTH/CHECKSUMS'
[MSG] [Thu Dec 27 14:48:14 2007] Checksum matches for 'C-Analyzer-0.10.tar.gz'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/README'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/scripts/'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/Makefile.PL'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/MANIFEST'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/Todo'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/Changes'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/pm_to_blib'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/LICENSE'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/lib/'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/lib/C/'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/lib/C/Analyzer.pm'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/t/'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'Analyzer/t/001_load.t'
[MSG] [Thu Dec 27 14:48:15 2007] Extracted 'C::Analyzer' to '/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer'
[MSG] [Thu Dec 27 14:48:15 2007] Checking if your kit is complete...
Looks good
Writing Makefile for C::Analyzer
[MSG] [Thu Dec 27 14:48:15 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Dec 27 14:48:17 2007] Manifying blib/man3/C::Analyzer.3
[ERROR] [Thu Dec 27 14:48:18 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/001_load......
# Failed test 'use C::Analyzer;'
# at t/001_load.t line 7.
# Tried to use 'C::Analyzer'.
# Error: Can't locate C/Analyzer.pm in @INC (@INC contains: /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer/blib /home/cpan/perl5.10.0/lib/5.10.0/i386-freebsd-thread-multi-64int /home/cpan/perl5.10.0/lib/5.10.0 /home/cpan/perl5.10.0/lib/site_perl/5.10.0/i386-freebsd-thread-multi-64int /home/cpan/perl5.10.0/lib/site_perl/5.10.0 .) at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/001_load.t line 7.
Can't locate object method "new" via package "C::Analyzer" (perhaps you forgot to load "C::Analyzer"?) at t/001_load.t line 9.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 1.
Files=1, Tests=1, 0 wallclock secs ( 0.01 usr 0.06 sys + 0.02 cusr 0.09 csys = 0.19 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
*** Error code 255
Stop in /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer.
[MSG] [Thu Dec 27 14:48:18 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
C::Analyzer
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'SREEKANTH (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'C::Analyzer' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::Simple 0.72 0.44
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer/blib/lib:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer/blib/arch:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Analyzer/blib
PERL5_CPANPLUS_IS_RUNNING = 84823
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl5.10.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 20 20 20 2
EGID: $) = 20 20 20 2
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=freebsd, osvers=6.2-release, archname=i386-freebsd-thread-multi-64int
uname='freebsd forneus.bingosnet.co.uk 6.2-release freebsd 6.2-release #0: fri jan 12 10:40:27 utc 2007 root@dessler.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args='-e -Dprefix=/home/cpan/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.4.6 [FreeBSD] 20060305', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Next