Front page | perl.cpan.testers |
Postings from December 2007
FAIL YVDHOVE-System-1.02 amd64-freebsd 6.2-release
From:
cpan
Date:
December 25, 2007 14:57
Subject:
FAIL YVDHOVE-System-1.02 amd64-freebsd 6.2-release
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear YVDHOVE,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_09. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Dec 25 23:56:32 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/Y/YV/YVDHOVE/YVDHOVE-System-1.02.tar.gz'
[MSG] [Tue Dec 25 23:56:33 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/Y/YV/YVDHOVE/CHECKSUMS'
[MSG] [Tue Dec 25 23:56:33 2007] Checksum matches for 'YVDHOVE-System-1.02.tar.gz'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/Changes'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/lib/'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/lib/YVDHOVE/'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/lib/YVDHOVE/System.pm'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/Makefile.PL'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/MANIFEST'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/META.yml'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/README'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/t/'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE-System-1.02/t/System.t'
[MSG] [Tue Dec 25 23:56:33 2007] Extracted 'YVDHOVE::System' to '/home/plu/blead/.cpanplus/5.10.0/build/YVDHOVE-System-1.02'
[MSG] [Tue Dec 25 23:56:34 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite IO::CaptureOutput 0 not found.
Writing Makefile for YVDHOVE::System
[MSG] [Tue Dec 25 23:56:34 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Dec 25 23:56:34 2007] Module 'YVDHOVE::System' requires 'IO::CaptureOutput' version '0' to be installed
[MSG] [Tue Dec 25 23:56:34 2007] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DA/DAGOLDEN/CHECKSUMS'
[MSG] [Tue Dec 25 23:56:35 2007] Checksum matches for 'IO-CaptureOutput-1.06.tar.gz'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/lib/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/lib/IO/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/lib/IO/CaptureOutput.pm'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/lib/IO/CaptureOutput.pod'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/noconsole.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/wperl.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/scripts/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/scripts/wperl-capture.pl'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/scripts/wperl-exec.pl'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/capture.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/t/capture_exec.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/Changes'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/MANIFEST'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/MANIFEST.SKIP'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/xt/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/xt/spelling.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/xt/critic.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/xt/pod-coverage.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/xt/perlcriticrc'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/xt/pod.t'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/inc/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/inc/Module/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/inc/Module/Build/'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/inc/Module/Build/DAGOLDEN.pm'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/META.yml'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/INSTALL'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/Makefile.PL'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/LICENSE'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/Build.PL'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO-CaptureOutput-1.06/README'
[MSG] [Tue Dec 25 23:56:35 2007] Extracted 'IO::CaptureOutput' to '/home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06'
[MSG] [Tue Dec 25 23:56:35 2007] Writing Makefile for IO::CaptureOutput
[MSG] [Tue Dec 25 23:56:35 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Dec 25 23:56:35 2007] Manifying blib/man3/IO::CaptureOutput.3
Manifying blib/man3/IO::CaptureOutput.3
[MSG] [Tue Dec 25 23:56:36 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/plu/blead/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/capture.........ok
3/15 skipped: various reasons
t/capture_exec....ok
t/noconsole.......ok
t/wperl...........skipped
all skipped: not MSWin32
All tests successful, 1 test and 3 subtests skipped.
Files=4, Tests=33, 1 wallclock secs ( 0.25 cusr + 0.07 csys = 0.32 CPU)
[MSG] [Tue Dec 25 23:56:36 2007] Sending test report for 'IO-CaptureOutput-1.06'
[MSG] [Tue Dec 25 23:56:36 2007] Ok, not sending test report
[MSG] [Tue Dec 25 23:56:36 2007] cp lib/YVDHOVE/System.pm blib/lib/YVDHOVE/System.pm
Manifying blib/man3/YVDHOVE::System.3
[ERROR] [Tue Dec 25 23:56:37 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/plu/blead/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/System....
# Failed test 'execCMD - RC'
# at t/System.t line 13.
# got: '0'
# expected: '1'
# Failed test 'execCMD - STDOUT'
# at t/System.t line 14.
# ''
# doesn't match '(?-xism:This is perl)'
dubious
Test returned status 3 (wstat 768, 0x300)
DIED. FAILED tests 2-4
Failed 3/4 tests, 25.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/System.t 3 768 4 3 2-4
Failed 1/1 test scripts. 3/4 subtests failed.
Files=1, Tests=4, 0 wallclock secs ( 0.05 cusr + 0.02 csys = 0.07 CPU)
*** Error code 3
Stop in /usr/home/plu/blead/.cpanplus/5.10.0/build/YVDHOVE-System-1.02.
# Failed test 'execCMD - STDERR'
# at t/System.t line 15.
# got: 'Can't exec "perl": No such file or directory at /home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06/blib/lib/IO/CaptureOutput.pm line 27.
# '
# expected: ''
# Looks like you failed 3 tests of 4.
Failed 1/1 test programs. 3/4 subtests failed.
[MSG] [Tue Dec 25 23:56:37 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IO::CaptureOutput 1.06 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11
PERL5LIB = :/home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06/blib/lib:/home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06/blib/arch:/home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06/blib:/home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06/blib/lib:/home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06/blib/arch:/home/plu/blead/.cpanplus/5.10.0/build/IO-CaptureOutput-1.06/blib:/home/plu/blead/.cpanplus/5.10.0/build/YVDHOVE-System-1.02/blib/lib:/home/plu/blead/.cpanplus/5.10.0/build/YVDHOVE-System-1.02/blib/arch:/home/plu/blead/.cpanplus/5.10.0/build/YVDHOVE-System-1.02/blib
PERL5_CPANPLUS_IS_RUNNING = 31458
PERL5_CPANPLUS_IS_VERSION = 0.83_09
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/plu/blead/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001 1001 0
EGID: $) = 1001 1001 1001 0
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0 patch 32559) configuration:
Platform:
osname=freebsd, osvers=6.2-release, archname=amd64-freebsd
uname='freebsd smoker 6.2-release freebsd 6.2-release #1: sat nov 17 18:48:00 cet 2007 root@host.omega.pqpq.de:usrobjusrsrcsysdelta amd64 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.4.6 [FreeBSD] 20060305', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL YVDHOVE-System-1.02 amd64-freebsd 6.2-release
by cpan