FAIL C-Analyzer-0.10 OpenBSD.i386-openbsd-thread-multi 4.1

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear SREEKANTH,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Dec 24 23:55:43 2007] Trying to get 'http://www.cpan.org/authors/id/S/SR/SREEKANTH/C-Analyzer-0.10.tar.gz'
[MSG] [Mon Dec 24 23:55:46 2007] Trying to get 'http://www.cpan.org/authors/id/S/SR/SREEKANTH/CHECKSUMS'
[MSG] [Mon Dec 24 23:55:47 2007] Checksum matches for 'C-Analyzer-0.10.tar.gz'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/README'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/scripts/'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/Makefile.PL'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/MANIFEST'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/Todo'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/Changes'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/pm_to_blib'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/LICENSE'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/lib/'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/lib/C/'
[MSG] [Mon Dec 24 23:55:47 2007] Extracted 'Analyzer/lib/C/Analyzer.pm'
[MSG] [Mon Dec 24 23:55:48 2007] Extracted 'Analyzer/t/'
[MSG] [Mon Dec 24 23:55:48 2007] Extracted 'Analyzer/t/001_load.t'
[MSG] [Mon Dec 24 23:55:48 2007] Extracted 'C::Analyzer' to '/home/chris/.cpanplus/5.8.8/build/Analyzer'
[MSG] [Mon Dec 24 23:55:49 2007] Checking if your kit is complete...
Looks good
Writing Makefile for C::Analyzer

[MSG] [Mon Dec 24 23:55:49 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Dec 24 23:55:52 2007] Manifying blib/man3/C::Analyzer.3

[ERROR] [Mon Dec 24 23:55:54 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/001_load......
#   Failed test 'use C::Analyzer;'
#   at t/001_load.t line 7.
#     Tried to use 'C::Analyzer'.
#     Error:  Can't locate C/Analyzer.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/Analyzer/blib/lib /home/chris/.cpanplus/5.8.8/build/Analyzer/blib/arch /home/chris/.cpanplus/5.8.8/build/Analyzer/blib /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/001_load.t line 7.
Can't locate object method "new" via package "C::Analyzer" (perhaps you forgot to load "C::Analyzer"?) at t/001_load.t line 9.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 2/2 subtests 

Test Summary Report
-------------------
t/001_load.t (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test number(s):  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 2 tests but ran 1.
Files=1, Tests=1,  0 wallclock secs ( 0.00 usr  0.09 sys +  0.00 cusr  0.21 csys =  0.30 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
*** Error code 255

Stop in /home/chris/.cpanplus/5.8.8/build/Analyzer (line 761 of Makefile).

[MSG] [Mon Dec 24 23:55:54 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

C::Analyzer

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'SREEKANTH (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'C::Analyzer'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Test::Simple                       0.72     0.44

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Analyzer/blib/lib:/home/chris/.cpanplus/5.8.8/build/Analyzer/blib/arch:/home/chris/.cpanplus/5.8.8/build/Analyzer/blib
    PERL5_CPANPLUS_IS_RUNNING = 25218
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 10 0 10
    EGID: $)  = 10 0 10


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi
    uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC  -L/usr/local/lib'

• FAIL C-Analyzer-0.10 OpenBSD.i386-openbsd-thread-multi 4.1 by chris