Front page | perl.cpan.testers |
Postings from December 2007
FAIL YATT-0.0.1 OpenBSD.i386-openbsd-thread-multi-64int 4.2
Thread Previous
From:
chris
Date:
December 19, 2007 22:44
Subject:
FAIL YATT-0.0.1 OpenBSD.i386-openbsd-thread-multi-64int 4.2
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear HKOBA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_08. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Dec 19 21:38:09 2007] Trying to get 'http://www.cpan.org/authors/id/H/HK/HKOBA/YATT-0.0.1.tar.gz'
[MSG] [Wed Dec 19 21:38:12 2007] Trying to get 'http://www.cpan.org/authors/id/H/HK/HKOBA/CHECKSUMS'
[MSG] [Wed Dec 19 21:38:13 2007] Checksum matches for 'YATT-0.0.1.tar.gz'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/t/'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/t/runtests.zsh'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/t/covered-runtests.zsh'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/t/node.t'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/t/util.t'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/t/parse.t'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/t/tokenize.t'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util/'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util/Taint.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util/Enum.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util/Symbol.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util/DirTreeBuilder.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util/Cache.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util/Finalizer.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Util.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Class/'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Class/Configurable.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Class/ArrayScanner.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/Class/Hierarchy.pm'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/LRXML/'
[MSG] [Wed Dec 19 21:38:14 2007] Extracted 'YATT-0.0.1/lib/YATT/LRXML/NodeCursor.pm'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT/LRXML/MetaInfo.pm'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT/LRXML/Parser.pm'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT/LRXML/Node.pm'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT/Manual.ja.pod'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT/LRXML.ja.pod'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT/Fields.pm'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT/LRXML.pm'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/lib/YATT.pm'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/README'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/Changes'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/Build.PL'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/MANIFEST.SKIP'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/META.yml'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT-0.0.1/MANIFEST'
[MSG] [Wed Dec 19 21:38:15 2007] Extracted 'YATT' to '/home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1'
[ERROR] [Wed Dec 19 21:38:15 2007] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Wed Dec 19 21:38:16 2007] No 'Makefile.PL' found - attempting to generate one
[MSG] [Wed Dec 19 21:38:17 2007] Checking if your kit is complete...
Looks good
Writing Makefile for YATT
[MSG] [Wed Dec 19 21:38:17 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Dec 19 21:38:20 2007] cp lib/YATT/Util/Enum.pm blib/lib/YATT/Util/Enum.pm
cp lib/YATT/Class/Configurable.pm blib/lib/YATT/Class/Configurable.pm
cp lib/YATT/LRXML/NodeCursor.pm blib/lib/YATT/LRXML/NodeCursor.pm
cp lib/YATT/LRXML/Node.pm blib/lib/YATT/LRXML/Node.pm
cp lib/YATT/Fields.pm blib/lib/YATT/Fields.pm
cp lib/YATT.pm blib/lib/YATT.pm
cp lib/YATT/Util/Cache.pm blib/lib/YATT/Util/Cache.pm
cp lib/YATT/Util/Finalizer.pm blib/lib/YATT/Util/Finalizer.pm
cp lib/YATT/LRXML/MetaInfo.pm blib/lib/YATT/LRXML/MetaInfo.pm
cp lib/YATT/LRXML/Parser.pm blib/lib/YATT/LRXML/Parser.pm
cp lib/YATT/Manual.ja.pod blib/lib/YATT/Manual.ja.pod
cp lib/YATT/Util/Taint.pm blib/lib/YATT/Util/Taint.pm
cp lib/YATT/Util/Symbol.pm blib/lib/YATT/Util/Symbol.pm
cp lib/YATT/Class/Hierarchy.pm blib/lib/YATT/Class/Hierarchy.pm
cp lib/YATT/LRXML.ja.pod blib/lib/YATT/LRXML.ja.pod
cp lib/YATT/LRXML.pm blib/lib/YATT/LRXML.pm
cp lib/YATT/Util.pm blib/lib/YATT/Util.pm
cp lib/YATT/Class/ArrayScanner.pm blib/lib/YATT/Class/ArrayScanner.pm
cp lib/YATT/Util/DirTreeBuilder.pm blib/lib/YATT/Util/DirTreeBuilder.pm
lib/YATT/LRXML.ja.pod:1: Unknown command paragraph "=encoding utf-8"
lib/YATT/Manual.ja.pod:1: Unknown command paragraph "=encoding utf-8"
Manifying blib/man3/YATT.3
Manifying blib/man3/YATT::LRXML.ja.3
Manifying blib/man3/YATT::Manual.ja.3
[ERROR] [Wed Dec 19 21:38:23 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/node..........ok
t/parse.........Can't locate Test/Differences.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/parse.t line 6.
BEGIN failed--compilation aborted at t/parse.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/tokenize......Can't locate Test/Differences.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/t/.. /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/tokenize.t line 8.
BEGIN failed--compilation aborted at t/tokenize.t line 8.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/util..........ok
Test Summary Report
-------------------
t/parse.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/tokenize.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=4, Tests=61, 2 wallclock secs ( 0.01 usr 0.38 sys + 0.21 cusr 1.13 csys = 1.73 CPU)
Result: FAIL
Failed 2/4 test programs. 0/61 subtests failed.
*** Error code 25
Stop in /home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1 (line 810 of Makefile).
[MSG] [Wed Dec 19 21:38:24 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Test::Differences
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'HKOBA (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Test::Differences' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/YATT-0.0.1/blib
PERL5_CPANPLUS_IS_RUNNING = 30537
PERL5_CPANPLUS_IS_VERSION = 0.83_08
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/ksh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl588/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 1000 0 1000
EGID: $) = 1000 0 1000
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi-64int
uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 '
config_args='-Dprefix=/home/cpan/perl588 -Dusethreads -Duse64bitint -Uusemymalloc'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
Thread Previous