Front page | perl.cpan.testers |
Postings from December 2007
FAIL DOCSIS-ConfigFile-0.4 i686-linux-thread-multi-64int-ld2.6.16.38
Thread Next
From:
chris
Date:
December 10, 2007 05:43
Subject:
FAIL DOCSIS-ConfigFile-0.4 i686-linux-thread-multi-64int-ld2.6.16.38
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear EIDOLON,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_08. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Dec 10 13:43:17 2007] Trying to get 'http://www.cpan.org/authors/id/E/EI/EIDOLON/DOCSIS-ConfigFile-0.4.tar.gz'
[MSG] [Mon Dec 10 13:43:19 2007] Trying to get 'http://www.cpan.org/authors/id/E/EI/EIDOLON/CHECKSUMS'
[MSG] [Mon Dec 10 13:43:20 2007] Checksum matches for 'DOCSIS-ConfigFile-0.4.tar.gz'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/t/'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/t/10.encode_decode.t'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/t/boilerplate.t'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/t/pod.t'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/t/pod-coverage.t'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/t/00-load.t'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/lib/'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/lib/DOCSIS/'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/lib/DOCSIS/ConfigFile/'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/lib/DOCSIS/ConfigFile/Syminfo.pm'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/lib/DOCSIS/ConfigFile/Encode.pm'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/lib/DOCSIS/ConfigFile/Decode.pm'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/lib/DOCSIS/ConfigFile.pm'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/MANIFEST'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/META.yml'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/examples/'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/examples/docsis_yaml.pl'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/Makefile.PL'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/Changes'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS-ConfigFile/README'
[MSG] [Mon Dec 10 13:43:20 2007] Extracted 'DOCSIS::ConfigFile' to '/home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile'
[MSG] [Mon Dec 10 13:43:24 2007] Warning: prerequisite Digest::HMAC_MD5 0 not found.
Writing Makefile for DOCSIS::ConfigFile
[MSG] [Mon Dec 10 13:43:24 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Dec 10 13:43:24 2007] Module 'DOCSIS::ConfigFile' requires 'Digest::HMAC_MD5' version '0' to be installed
[MSG] [Mon Dec 10 13:43:25 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS'
[MSG] [Mon Dec 10 13:43:32 2007] Checksum matches for 'Digest-HMAC-1.01.tar.gz'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/rfc2104.txt'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/Makefile.PL'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/lib/'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC.pm'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC_SHA1.pm'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/lib/Digest/HMAC_MD5.pm'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/Changes'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/t/'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/t/rfc2202.t'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/README'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest-HMAC-1.01/MANIFEST'
[MSG] [Mon Dec 10 13:43:32 2007] Extracted 'Digest::HMAC_MD5' to '/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01'
[MSG] [Mon Dec 10 13:43:35 2007] Warning: prerequisite Digest::SHA1 1 not found.
Writing Makefile for Digest::HMAC
[MSG] [Mon Dec 10 13:43:35 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Dec 10 13:43:35 2007] Module 'Digest::HMAC_MD5' requires 'Digest::SHA1' version '1' to be installed
[MSG] [Mon Dec 10 13:43:35 2007] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAAS/CHECKSUMS'
[MSG] [Mon Dec 10 13:43:38 2007] Checksum matches for 'Digest-SHA1-2.11.tar.gz'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/README'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/t/'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/t/bits.t'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/t/badfile.t'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/t/sha1.t'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/MANIFEST'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/fip180-1.html'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/SHA1.pm'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/typemap'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/fip180-1.gif'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/Changes'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/Makefile.PL'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest-SHA1-2.11/SHA1.xs'
[MSG] [Mon Dec 10 13:43:38 2007] Extracted 'Digest::SHA1' to '/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11'
[MSG] [Mon Dec 10 13:43:41 2007] Writing Makefile for Digest::SHA1
[MSG] [Mon Dec 10 13:43:41 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Dec 10 13:43:47 2007] cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"2.11\" -DXS_VERSION=\"2.11\" -fpic "-I/home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE" SHA1.c
Running Mkbootstrap for Digest::SHA1 ()
chmod 644 SHA1.bs
rm -f blib/arch/auto/Digest/SHA1/SHA1.so
cc -shared -L/usr/local/lib SHA1.o -o blib/arch/auto/Digest/SHA1/SHA1.so \
\
chmod 755 blib/arch/auto/Digest/SHA1/SHA1.so
cp SHA1.bs blib/arch/auto/Digest/SHA1/SHA1.bs
chmod 644 blib/arch/auto/Digest/SHA1/SHA1.bs
Manifying blib/man3/Digest::SHA1.3
[MSG] [Mon Dec 10 13:43:48 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/badfile......ok
t/bits.........ok
t/sha1.........ok
All tests successful.
Files=3, Tests=17, 1 wallclock secs ( 0.03 usr 0.04 sys + 0.11 cusr 0.07 csys = 0.25 CPU)
Result: PASS
[MSG] [Mon Dec 10 13:43:48 2007] Sending test report for 'Digest-SHA1-2.11'
[MSG] [Mon Dec 10 13:43:48 2007] Ok, not sending test report
[MSG] [Mon Dec 10 13:43:49 2007] Manifying blib/man3/Digest::HMAC_MD5.3
Manifying blib/man3/Digest::HMAC.3
Manifying blib/man3/Digest::HMAC_SHA1.3
[MSG] [Mon Dec 10 13:43:50 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/rfc2202......ok
All tests successful.
Files=1, Tests=14, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.04 cusr 0.04 csys = 0.11 CPU)
Result: PASS
[MSG] [Mon Dec 10 13:43:50 2007] Sending test report for 'Digest-HMAC-1.01'
[MSG] [Mon Dec 10 13:43:50 2007] Ok, not sending test report
[MSG] [Mon Dec 10 13:43:51 2007] Manifying blib/man3/DOCSIS::ConfigFile.3
Manifying blib/man3/DOCSIS::ConfigFile::Encode.3
Manifying blib/man3/DOCSIS::ConfigFile::Syminfo.3
Manifying blib/man3/DOCSIS::ConfigFile::Decode.3
[ERROR] [Mon Dec 10 13:43:53 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...............
# Failed test 'use DOCSIS::ConfigFile;'
# in t/00-load.t at line 6.
# Tried to use 'DOCSIS::ConfigFile'.
# Error: Can't locate Log/Log4perl.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl) at /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib/DOCSIS/ConfigFile.pm line 13.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9.
# Testing DOCSIS::ConfigFile , Perl 5.008008, /home/cpan/perl588/bin/perl
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/10.encode_decode......Can't locate Log/Log4perl.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib/DOCSIS/ConfigFile.pm line 13.
BEGIN failed--compilation aborted at /home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib/DOCSIS/ConfigFile.pm line 13.
Compilation failed in require at t/10.encode_decode.t line 7.
BEGIN failed--compilation aborted at t/10.encode_decode.t line 7.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/boilerplate...........ok
t/pod-coverage..........skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod...................skipped: Test::Pod 1.14 required for testing POD
Test Summary Report
-------------------
t/00-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 1
t/10.encode_decode.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=5, Tests=4, 1 wallclock secs ( 0.02 usr 0.15 sys + 0.51 cusr 0.26 csys = 0.94 CPU)
Result: FAIL
Failed 2/5 test programs. 1/4 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Mon Dec 10 13:43:53 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Log::Log4perl
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'EIDOLON (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Log::Log4perl' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Digest::HMAC_MD5 1.01 0
Digest::MD5 2.36 0
Math::BigInt 1.77 0
Socket 1.78 0
Test::More 0.62 0
bytes 1.02 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-SHA1-2.11/blib:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/Digest-HMAC-1.01/blib:/home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/DOCSIS-ConfigFile/blib
PERL5_CPANPLUS_IS_RUNNING = 5732
PERL5_CPANPLUS_IS_VERSION = 0.83_08
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl588/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
config_args='-e'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.0.3', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Thread Next