FAIL HAM-Device-IcomCIVSerialIO-0.02OpenBSD.i386-openbsd-thread-multi-64int 4.2

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear EKKIP,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_08. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Dec  7 20:22:06 2007] Trying to get 'http://www.cpan.org/authors/id/E/EK/EKKIP/HAM-Device-IcomCIVSerialIO-0.02.tar.gz'
[MSG] [Fri Dec  7 20:22:09 2007] Trying to get 'http://www.cpan.org/authors/id/E/EK/EKKIP/CHECKSUMS'
[MSG] [Fri Dec  7 20:22:10 2007] Checksum matches for 'HAM-Device-IcomCIVSerialIO-0.02.tar.gz'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/lib/'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/lib/HAM/'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/lib/HAM/Device/'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/lib/HAM/Device/IcomCIVSerialIO.pm'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/Changes'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/Makefile.PL'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/README'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/META.yml'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/t/'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/t/HAM-Device-IcomCIVSerialIO.t'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM-Device-IcomCIVSerialIO-0.02/MANIFEST'
[MSG] [Fri Dec  7 20:22:11 2007] Extracted 'HAM::Device::IcomCIVSerialIO' to '/home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02'
[MSG] [Fri Dec  7 20:22:13 2007] Checking if your kit is complete...
Looks good
Writing Makefile for HAM::Device::IcomCIVSerialIO

[MSG] [Fri Dec  7 20:22:13 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Dec  7 20:22:16 2007] cp lib/HAM/Device/IcomCIVSerialIO.pm blib/lib/HAM/Device/IcomCIVSerialIO.pm
Manifying blib/man3/HAM::Device::IcomCIVSerialIO.3

[ERROR] [Fri Dec  7 20:22:18 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/HAM-Device-IcomCIVSerialIO......
#   Failed test 'use HAM::Device::IcomCIVSerialIO;'
#   in t/HAM-Device-IcomCIVSerialIO.t at line 9.
#     Tried to use 'HAM::Device::IcomCIVSerialIO'.
#     Error:  Can't locate Device/SerialPort.pm in @INC (@INC contains: /home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02/blib/lib /home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02/blib/arch /home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02/blib /home/cpan/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02/blib/lib/HAM/Device/IcomCIVSerialIO.pm line 60.
# BEGIN failed--compilation aborted at t/HAM-Device-IcomCIVSerialIO.t line 9.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/1 subtests 

Test Summary Report
-------------------
t/HAM-Device-IcomCIVSerialIO.t (Wstat: 256 Tests: 1 Failed: 1)
  Failed test number(s):  1
  Non-zero exit status: 1
Files=1, Tests=1,  0 wallclock secs ( 0.00 usr  0.08 sys +  0.00 cusr  0.20 csys =  0.28 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
*** Error code 25

Stop in /home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02 (line 749 of Makefile).

[MSG] [Fri Dec  7 20:22:18 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Device::SerialPort

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'EKKIP (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Device::SerialPort'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = :/home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02/blib/lib:/home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02/blib/arch:/home/cpan/perl588/.cpanplus/5.8.8/build/HAM-Device-IcomCIVSerialIO-0.02/blib
    PERL5_CPANPLUS_IS_RUNNING = 30915
    PERL5_CPANPLUS_IS_VERSION = 0.83_08
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 0 1000
    EGID: $)  = 1000 0 1000


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi-64int
    uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 '
    config_args='-Dprefix=/home/cpan/perl588 -Dusethreads -Duse64bitint -Uusemymalloc'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC  -L/usr/local/lib'

• FAIL HAM-Device-IcomCIVSerialIO-0.02OpenBSD.i386-openbsd-thread-multi-64int 4.2 by chris