Front page | perl.cpan.testers |
Postings from December 2007
FAIL URI-crid-0.01 i386-netbsd-thread-multi-64int 4.0_rc3
Thread Previous
From:
chris
Date:
December 2, 2007 06:52
Subject:
FAIL URI-crid-0.01 i386-netbsd-thread-multi-64int 4.0_rc3
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear ALIC,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_09. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun Dec 2 14:51:44 2007] Trying to get 'http://www.cpan.org/authors/id/A/AL/ALIC/URI-crid-0.01.tar.gz'
[MSG] [Sun Dec 2 14:51:46 2007] Trying to get 'http://www.cpan.org/authors/id/A/AL/ALIC/CHECKSUMS'
[MSG] [Sun Dec 2 14:51:47 2007] Checksum matches for 'URI-crid-0.01.tar.gz'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/README'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/Changes'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/MANIFEST'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/lib/'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/lib/URI/'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/lib/URI/crid.pm'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/META.yml'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/t/'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/t/01-crid.t'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/t/pod-coverage.t'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/t/00-load.t'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/t/pod.t'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/Makefile.PL'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/examples/'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI-crid-0.01/examples/breakdown-uri.pl'
[MSG] [Sun Dec 2 14:51:47 2007] Extracted 'URI::crid' to '/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01'
[MSG] [Sun Dec 2 14:51:48 2007] Checking if your kit is complete...
Looks good
Writing Makefile for URI::crid
[MSG] [Sun Dec 2 14:51:48 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Dec 2 14:51:51 2007] cp lib/URI/crid.pm blib/lib/URI/crid.pm
Manifying blib/man3/URI::crid.3
[ERROR] [Sun Dec 2 14:51:53 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...........
# Failed test 'use URI::crid;'
# at t/00-load.t line 6.
# Tried to use 'URI::crid'.
# Error: Can't locate URI/Escape.pm in @INC (@INC contains: /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib /home/cpan/perl5.10.0/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl5.10.0/lib/5.10.0 /home/cpan/perl5.10.0/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl5.10.0/lib/site_perl/5.10.0) at /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib/URI/crid.pm line 8.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value $URI::crid::VERSION in concatenation (.) or string at t/00-load.t line 9.
# Testing URI::crid , Perl 5.010000, /home/cpan/perl5.10.0/bin/perl
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/01-crid...........
# Failed test 'use URI::crid;'
# at t/01-crid.t line 6.
# Tried to use 'URI::crid'.
# Error: Can't locate URI/Escape.pm in @INC (@INC contains: /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib /home/cpan/perl5.10.0/lib/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl5.10.0/lib/5.10.0 /home/cpan/perl5.10.0/lib/site_perl/5.10.0/i386-netbsd-thread-multi-64int /home/cpan/perl5.10.0/lib/site_perl/5.10.0) at /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib/URI/crid.pm line 8.
# BEGIN failed--compilation aborted at t/01-crid.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "URI" at t/01-crid.t line 9.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
t/pod-coverage......skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod...............skipped: Test::Pod 1.22 required for testing POD
Test Summary Report
-------------------
t/00-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 1
t/01-crid.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 1.
Files=4, Tests=2, 1 wallclock secs ( 0.05 usr 0.19 sys + 0.22 cusr 0.50 csys = 0.96 CPU)
Result: FAIL
Failed 2/4 test programs. 2/2 subtests failed.
*** Error code 255
Stop.
make: stopped in /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01
[MSG] [Sun Dec 2 14:51:53 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
URI::Escape
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'ALIC (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'URI::Escape' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.72 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib
PERL5_CPANPLUS_IS_RUNNING = 11292
PERL5_CPANPLUS_IS_VERSION = 0.83_09
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/ksh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl5.10.0/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=netbsd, osvers=4.0_rc3, archname=i386-netbsd-thread-multi-64int
uname='netbsd diafol.bingosnet.co.uk 4.0_rc3 netbsd 4.0_rc3 (generic) #0: tue oct 16 01:14:06 pdt 2007 builds@wb34:homebuildsabnetbsd-4-0-rc3i386200710160011z-objhomebuildsabnetbsd-4-0-rc3srcsysarchi386compilegeneric i386 '
config_args='-e -Dprefix=/home/cpan/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='4.1.2 20061021 prerelease (NetBSD nb3 20061125)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Thread Previous