Front page | perl.cpan.testers |
Postings from November 2007
FAIL BrLock-0.1 OpenBSD.i386-openbsd-thread-multi-64int 4.1
From:
chris
Date:
November 30, 2007 22:40
Subject:
FAIL BrLock-0.1 OpenBSD.i386-openbsd-thread-multi-64int 4.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear RIBAMAR,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_09. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Dec 1 06:37:28 2007] Trying to get 'http://www.cpan.org/authors/id/R/RI/RIBAMAR/BrLock-0.1.tar.gz'
[MSG] [Sat Dec 1 06:37:32 2007] Trying to get 'http://www.cpan.org/authors/id/R/RI/RIBAMAR/CHECKSUMS'
[MSG] [Sat Dec 1 06:37:32 2007] Checksum matches for 'BrLock-0.1.tar.gz'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/Makefile.PL'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/Changes'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/t/'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/t/BrLock.t'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/t/SomePerlFunc.t'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/t/BrXML.t'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/lib/'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/lib/BrLock/'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/lib/BrLock/SomePerlFunc.pm'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/lib/BrLock/BrXML.pm'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/lib/BrLock.pm'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/MANIFEST'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/example/'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/example/resource.pl'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/example/br-node.pl'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/example/mutex.conf'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/example/README'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/COPYING'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/README'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock-0.1/META.yml'
[MSG] [Sat Dec 1 06:37:33 2007] Extracted 'BrLock' to '/home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1'
[MSG] [Sat Dec 1 06:37:36 2007] Checking if your kit is complete...
Looks good
Writing Makefile for BrLock
[MSG] [Sat Dec 1 06:37:36 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Dec 1 06:37:36 2007] Module 'BrLock' requires 'Switch' version '2.1001' to be installed
[MSG] [Sat Dec 1 06:37:36 2007] Trying to get 'http://www.cpan.org/authors/id/R/RG/RGARCIA/Switch-2.13.tar.gz'
[MSG] [Sat Dec 1 06:37:39 2007] Trying to get 'http://www.cpan.org/authors/id/R/RG/RGARCIA/CHECKSUMS'
[MSG] [Sat Dec 1 06:37:41 2007] Checksum matches for 'Switch-2.13.tar.gz'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/t/'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/t/given.t'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/t/switch.t'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/t/nested.t'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/MANIFEST'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/META.yml'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/Changes'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/Switch.pm'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/README'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch-2.13/Makefile.PL'
[MSG] [Sat Dec 1 06:37:41 2007] Extracted 'Switch' to '/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13'
[MSG] [Sat Dec 1 06:37:43 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Switch
[MSG] [Sat Dec 1 06:37:43 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Dec 1 06:37:47 2007] cp Switch.pm blib/lib/Switch.pm
Manifying blib/man3/Switch.3
[MSG] [Sat Dec 1 06:37:52 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/chris/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/given.......ok
t/nested......ok
t/switch......ok
All tests successful.
Files=3, Tests=590, 3 wallclock secs ( 0.25 usr 0.22 sys + 2.16 cusr 0.82 csys = 3.45 CPU)
Result: PASS
[MSG] [Sat Dec 1 06:37:52 2007] Sending test report for 'Switch-2.13'
[MSG] [Sat Dec 1 06:37:52 2007] Successfully sent 'pass' report for 'Switch-2.13'
[MSG] [Sat Dec 1 06:37:56 2007] cp lib/BrLock.pm blib/lib/BrLock.pm
cp lib/BrLock/SomePerlFunc.pm blib/lib/BrLock/SomePerlFunc.pm
cp lib/BrLock/BrXML.pm blib/lib/BrLock/BrXML.pm
Manifying blib/man3/BrLock.3
[ERROR] [Sat Dec 1 06:38:00 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/BrLock............
# Failed test 'use BrLock;'
# at t/BrLock.t line 3.
# Tried to use 'BrLock'.
# Error: Can't locate XML/Parser.pm in @INC (@INC contains: /home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib/lib /home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib/arch /home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/lib /home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/arch /home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib /home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/lib /home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/arch /home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib /home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib/lib /home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib/arch /home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib /home/chris/perl5.10.0/lib/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl5.10.0/lib/5.10.0 /home/chris/perl5.10.0/lib/site_perl/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int /home/chris/perl5.10.0/lib/site_perl/5.10.0 .) at /home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib/lib/BrLock.pm line 94.
# BEGIN failed--compilation aborted at t/BrLock.t line 3.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/BrXML.............ok
t/SomePerlFunc......ok
Test Summary Report
-------------------
t/BrLock.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test number(s): 1
Non-zero exit status: 1
Files=3, Tests=3, 2 wallclock secs ( 0.03 usr 0.23 sys + 0.63 cusr 1.24 csys = 2.13 CPU)
Result: FAIL
Failed 1/3 test programs. 1/3 subtests failed.
*** Error code 255
Stop in /home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1 (line 766 of Makefile).
[MSG] [Sat Dec 1 06:38:00 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
XML::Parser
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'RIBAMAR (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'XML::Parser' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IO::Socket 1.30_01 1.23
! Switch 2.13 2.1001
threads 1.67 1.07
threads::shared 1.14 0.94
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/lib:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/arch:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/lib:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib/arch:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Switch-2.13/blib:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib/lib:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib/arch:/home/chris/perl5.10.0/.cpanplus/5.10.0/build/BrLock-0.1/blib
PERL5_CPANPLUS_IS_RUNNING = 27732
PERL5_CPANPLUS_IS_VERSION = 0.83_09
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/ksh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/chris/perl5.10.0/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 10 10 0
EGID: $) = 10 10 0
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi-64int
uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 '
config_args='-e -Dprefix=/home/chris/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
-
FAIL BrLock-0.1 OpenBSD.i386-openbsd-thread-multi-64int 4.1
by chris