FAIL URI-crid-0.01 cygwin-thread-multi-64int 1.5.24(0.15642)

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear ALIC,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_09. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Nov 30 18:16:07 2007] Trying to get 'http://www.cpan.org/authors/id/A/AL/ALIC/URI-crid-0.01.tar.gz'
[MSG] [Fri Nov 30 18:16:10 2007] Trying to get 'http://www.cpan.org/authors/id/A/AL/ALIC/CHECKSUMS'
[MSG] [Fri Nov 30 18:16:11 2007] Checksum matches for 'URI-crid-0.01.tar.gz'
[MSG] [Fri Nov 30 18:16:11 2007] Extracted 'URI-crid-0.01/'
[MSG] [Fri Nov 30 18:16:11 2007] Extracted 'URI-crid-0.01/README'
[MSG] [Fri Nov 30 18:16:11 2007] Extracted 'URI-crid-0.01/Changes'
[MSG] [Fri Nov 30 18:16:11 2007] Extracted 'URI-crid-0.01/MANIFEST'
[MSG] [Fri Nov 30 18:16:11 2007] Extracted 'URI-crid-0.01/lib/'
[MSG] [Fri Nov 30 18:16:11 2007] Extracted 'URI-crid-0.01/lib/URI/'
[MSG] [Fri Nov 30 18:16:11 2007] Extracted 'URI-crid-0.01/lib/URI/crid.pm'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/META.yml'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/t/'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/t/01-crid.t'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/t/pod-coverage.t'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/t/00-load.t'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/t/pod.t'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/Makefile.PL'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/examples/'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI-crid-0.01/examples/breakdown-uri.pl'
[MSG] [Fri Nov 30 18:16:12 2007] Extracted 'URI::crid' to '/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01'
[MSG] [Fri Nov 30 18:16:14 2007] Checking if your kit is complete...
Looks good
Writing Makefile for URI::crid

[MSG] [Fri Nov 30 18:16:14 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Nov 30 18:16:25 2007] cp lib/URI/crid.pm blib/lib/URI/crid.pm

[ERROR] [Fri Nov 30 18:16:31 2007] MAKE TEST failed: Illegal seek /home/cwill1is/perl5.10.0/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load........... Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/1 subtests 

#   Failed test 'use URI::crid;'
#   at t/00-load.t line 6.
#     Tried to use 'URI::crid'.
#     Error:  Can't locate URI/Escape.pm in @INC (@INC contains: /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/arch /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib /home/cwill1is/perl5.10.0/lib/5.10.0/cygwin-thread-multi-64int /home/cwill1is/perl5.10.0/lib/5.10.0 /home/cwill1is/perl5.10.0/lib/site_perl/5.10.0/cygwin-thread-multi-64int /home/cwill1is/perl5.10.0/lib/site_perl/5.10.0) at /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib/URI/crid.pm line 8.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value $URI::crid::VERSION in concatenation (.) or string at t/00-load.t line 9.
# Testing URI::crid , Perl 5.010000, /home/cwill1is/perl5.10.0/bin/perl.exe
# Looks like you failed 1 test of 1.
t/01-crid........... Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 7/7 subtests 

#   Failed test 'use URI::crid;'
#   at t/01-crid.t line 6.
#     Tried to use 'URI::crid'.
#     Error:  Can't locate URI/Escape.pm in @INC (@INC contains: /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/arch /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib /home/cwill1is/perl5.10.0/lib/5.10.0/cygwin-thread-multi-64int /home/cwill1is/perl5.10.0/lib/5.10.0 /home/cwill1is/perl5.10.0/lib/site_perl/5.10.0/cygwin-thread-multi-64int /home/cwill1is/perl5.10.0/lib/site_perl/5.10.0) at /home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib/URI/crid.pm line 8.
# BEGIN failed--compilation aborted at t/01-crid.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "URI" at t/01-crid.t line 9.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
t/pod-coverage......skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod...............skipped: Test::Pod 1.22 required for testing POD

Test Summary Report
-------------------
t/00-load.t     (Wstat: 256 Tests: 1 Failed: 1)
  Failed test number(s):  1
  Non-zero exit status: 1
t/01-crid.t     (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test number(s):  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 7 tests but ran 1.
Files=4, Tests=2,  2 wallclock secs ( 0.05 usr  0.08 sys +  0.51 cusr  0.57 csys =  1.21 CPU)
Result: FAIL
Failed 2/4 test programs. 2/2 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Fri Nov 30 18:16:31 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

URI::Escape

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'ALIC (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'URI::Escape'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Test::More                         0.72        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    COMSPEC = C:\WINDOWS\system32\cmd.exe
    INCLUDE = ;C:\strawberry-perl\mingw\include;C:\strawberry-perl\perl\lib\CORE;C:\strawberry-perl\perl\lib\encode
    LIB = ;C:\strawberry-perl\mingw\lib;C:\strawberry-perl\perl\bin
    NUMBER_OF_PROCESSORS = 1
    PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/GNUWin32/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/Program Files/Support Tools/:/cygdrive/c/Mingw/dmake:/cygdrive/c/Mingw/bin:/cygdrive/c/Mingw/tools:/cygdrive/c/Perl/bin/:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/Microsoft SQL Server/80/Tools/BINN://scc030/helpdeskv6$/HelpDesk/HDBIN32/:/cygdrive/c/Program Files/Vim/vim63:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/strawberry-perl/dmake/bin:/cygdrive/c/strawberry-perl/mingw/bin:/cygdrive/c/WINDOWS/system32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/SSH Communications Security/SSH Secure Shell:/cygdrive/c/Program Files/Nmap
    PERL5LIB = :/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/lib:/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib/arch:/home/cwill1is/perl5.10.0/.cpanplus/5.10.0/build/URI-crid-0.01/blib
    PERL5_CPANPLUS_IS_RUNNING = 1144
    PERL5_CPANPLUS_IS_VERSION = 0.83_09
    PERL_MM_USE_DEFAULT = 1
    PROCESSOR_IDENTIFIER = x86 Family 15 Model 1 Stepping 2, GenuineIntel
    SHELL = /bin/sh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cwill1is/perl5.10.0/bin/perl.exe
    UID:  $<  = 11964
    EUID: $>  = 11964
    GID:  $(  = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503
    EGID: $)  = 10513 544 545 1003 1026 10512 10513 35917 10519 12222 51275 47366 11814 11812 11265 14694 13857 44594 44599 19834 18930 49232 47137 46503


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int
    uname='cygwin_nt-5.2 citu003 1.5.24(0.15642) 2007-01-31 10:57 i686 cygwin '
    config_args='-de -Dprefix=/home/cwill1is/perl5.10.0 -Dusethreads -Duse64bitint -Uusemymalloc'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='g++', ldflags =' -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib /lib
    libs=-lgdbm -ldb -ldl -lcrypt -lgdbm_compat
    perllibs=-ldl -lcrypt -lgdbm_compat
    libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' -s'
    cccdlflags=' ', lddlflags=' --shared  -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--stack,8388608 -Wl,--enable-auto-image-base -Wl,--enable-auto-import -L/usr/local/lib'

• FAIL URI-crid-0.01 cygwin-thread-multi-64int 1.5.24(0.15642) by chris