FAIL X11-GUITest-record-0.13 cygwin-thread-multi-64int1.5.24(0.15642)

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear MKODERER,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat Nov 17 19:09:43 2007] Trying to get 'http://www.cpan.org/authors/id/M/MK/MKODERER/X11-GUITest-record-0.13.tar.gz'
[MSG] [Sat Nov 17 19:09:44 2007] Trying to get 'http://www.cpan.org/authors/id/M/MK/MKODERER/CHECKSUMS'
[MSG] [Sat Nov 17 19:09:44 2007] Checksum matches for 'X11-GUITest-record-0.13.tar.gz'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/Changes'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/Makefile.PL'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/META.yml'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/record.h'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/t/'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/t/X11-GUITest-record.t'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/datastructure.h'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/record.xs'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/MANIFEST'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/datastructure.c'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/ppport.h'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/README'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/lib/'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/lib/X11/'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/lib/X11/GUITest/'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/lib/X11/GUITest/record.pm'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/test.pl'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/fallback/'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/fallback/const-c.inc'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11-GUITest-record-0.13/fallback/const-xs.inc'
[MSG] [Sat Nov 17 19:09:45 2007] Extracted 'X11::GUITest::record' to '/home/cwill1is/perl588/.cpanplus/5.8.8/build/X11-GUITest-record-0.13'
[MSG] [Sat Nov 17 19:09:49 2007] Writing POD file
Checking if your kit is complete...
Looks good
Writing Makefile for X11::GUITest::record

[MSG] [Sat Nov 17 19:09:49 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Nov 17 19:10:11 2007] cp lib/X11/GUITest/record.pm blib/lib/X11/GUITest/record.pm
cp X11-GUITest-record.pod blib/lib/X11/GUITest/X11-GUITest-record.pod
gcc -c  -I. -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -DUSEIMPORTLIB -O2   -DVERSION=\"0.13\" -DXS_VERSION=\"0.13\"  "-I/home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int/CORE"   datastructure.c
/home/cwill1is/perl588/bin/perl.exe /home/cwill1is/perl588/lib/5.8.8/ExtUtils/xsubpp  -typemap /home/cwill1is/perl588/lib/5.8.8/ExtUtils/typemap  record.xs > record.xsc && mv record.xsc record.c
gcc -c  -I. -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -DUSEIMPORTLIB -O2   -DVERSION=\"0.13\" -DXS_VERSION=\"0.13\"  "-I/home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int/CORE"   record.c
Running Mkbootstrap for X11::GUITest::record ()
chmod 644 record.bs
rm -f blib/arch/auto/X11/GUITest/record/record.dll
ld2  -L/usr/local/lib datastructure.o record.o  -o blib/arch/auto/X11/GUITest/record/record.dll 	\
	  /home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int/CORE/libperl.dll.a -L/usr/X11R6/lib -lX11 -lXtst  	\
	  
gcc -shared -o  record.dll -Wl,--out-implib=librecord.dll.a -Wl,--export-all-symbols -Wl,--enable-auto-import -Wl,--stack,8388608 -Wl,--enable-auto-image-base \
-L/usr/local/lib datastructure.o record.o  /home/cwill1is/perl588/lib/5.8.8/cygwin-thread-multi-64int/CORE/libperl.dll.a -L/usr/X11R6/lib -lX11 -lXtst
Creating library file: librecord.dll.a
mv record.dll librecord.dll.a blib/arch/auto/X11/GUITest/record/
chmod 755 blib/arch/auto/X11/GUITest/record/record.dll
cp record.bs blib/arch/auto/X11/GUITest/record/record.bs
chmod 644 blib/arch/auto/X11/GUITest/record/record.bs

[ERROR] [Sat Nov 17 19:10:16 2007] MAKE TEST failed:  /home/cwill1is/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/X11-GUITest-record......skipped: Record extension is not enabled

Test Summary Report
-------------------
t/X11-GUITest-record.t (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test number(s):  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 0 tests but ran 1.
Files=1, Tests=1,  1 wallclock secs ( 0.03 usr  0.06 sys +  0.17 cusr  0.14 csys =  0.41 CPU)
Result: FAIL
Not able to open Display at /home/cwill1is/perl588/.cpanplus/5.8.8/build/X11-GUITest-record-0.13/blib/lib/X11/GUITest/record.pm line 460.
INIT failed--call queue aborted.
Failed 1/1 test programs. 1/1 subtests failed.

[MSG] [Sat Nov 17 19:10:16 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    COMSPEC = C:\WINDOWS\system32\cmd.exe
    INCLUDE = ;C:\strawberry-perl\mingw\include;C:\strawberry-perl\perl\lib\CORE;C:\strawberry-perl\perl\lib\encode
    LIB = ;C:\strawberry-perl\mingw\lib;C:\strawberry-perl\perl\bin
    NUMBER_OF_PROCESSORS = 1
    PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/GNUWin32/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/Program Files/Support Tools/:/cygdrive/c/Mingw/dmake:/cygdrive/c/Mingw/bin:/cygdrive/c/Mingw/tools:/cygdrive/c/Perl/bin/:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/Microsoft SQL Server/80/Tools/BINN://scc030/helpdeskv6$/HelpDesk/HDBIN32/:/cygdrive/c/Program Files/Vim/vim63:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/strawberry-perl/perl/bin:/cygdrive/c/strawberry-perl/dmake/bin:/cygdrive/c/strawberry-perl/mingw/bin:/cygdrive/c/WINDOWS/system32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/SSH Communications Security/SSH Secure Shell:/cygdrive/c/Program Files/Nmap
    PERL5LIB = :/home/cwill1is/perl588/.cpanplus/5.8.8/build/X11-GUITest-record-0.13/blib/lib:/home/cwill1is/perl588/.cpanplus/5.8.8/build/X11-GUITest-record-0.13/blib/arch:/home/cwill1is/perl588/.cpanplus/5.8.8/build/X11-GUITest-record-0.13/blib
    PERL5_CPANPLUS_IS_RUNNING = 31316
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    PROCESSOR_IDENTIFIER = x86 Family 15 Model 1 Stepping 2, GenuineIntel
    SHELL = /bin/sh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cwill1is/perl588/bin/perl.exe
    UID:  $<  = 11964
    EUID: $>  = 11964
    GID:  $(  = 10513 46503 47137 49232 18930 19834 44599 44594 13857 14694 11265 11812 11814 47366 51275 12222 10519 35917 10513 10512 1026 1003 545 544
    EGID: $)  = 10513 46503 47137 49232 18930 19834 44599 44594 13857 14694 11265 11812 11814 47366 51275 12222 10519 35917 10513 10512 1026 1003 545 544


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int
    uname='cygwin_nt-5.2 citu003 1.5.24(0.15642) 2007-01-23 18:50 i686 cygwin '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include',
    optimize='-O2',
    cppflags='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='ld2', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib /lib
    libs=-lgdbm -ldb -ldl -lcrypt -lgdbm_compat
    perllibs=-ldl -lcrypt -lgdbm_compat
    libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -L/usr/local/lib'

• FAIL X11-GUITest-record-0.13 cygwin-thread-multi-64int1.5.24(0.15642) by chris