FAIL Test-Sysconfig-0.01 OpenBSD.i386-openbsd-thread-multi 4.1

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear IANK,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Jun 28 02:13:58 2007] Trying to get 'http://www.cpan.org/authors/id/I/IA/IANK/Test-Sysconfig-0.01.tar.gz'
[MSG] [Thu Jun 28 02:13:59 2007] Trying to get 'http://www.cpan.org/authors/id/I/IA/IANK/CHECKSUMS'
[MSG] [Thu Jun 28 02:14:00 2007] Checksum matches for 'Test-Sysconfig-0.01.tar.gz'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/Changes'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/Makefile.PL'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/t/'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/t/00-load.t'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/t/01-sysconfig.t'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/t/pod-coverage.t'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/t/pod.t'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/META.yml'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/MANIFEST'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/lib/'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/lib/Test/'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/lib/Test/Sysconfig.pm'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test-Sysconfig-0.01/README'
[MSG] [Thu Jun 28 02:14:00 2007] Extracted 'Test::Sysconfig' to '/home/chris/.cpanplus/5.8.8/build/Test-Sysconfig-0.01'
[MSG] [Thu Jun 28 02:14:02 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Test::Sysconfig

[MSG] [Thu Jun 28 02:14:02 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Jun 28 02:14:05 2007] cp lib/Test/Sysconfig.pm blib/lib/Test/Sysconfig.pm
Manifying blib/man3/Test::Sysconfig.3

[ERROR] [Thu Jun 28 02:14:07 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.........# Testing Test::Sysconfig 0.01, Perl 5.008008, /home/chris/perl588/bin/perl
ok
t/01-sysconfig....
#   Failed test 'perl installed'
#   at t/01-sysconfig.t line 11.
# Looks like you failed 1 test of 4.
dubious
	Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 2
	Failed 1/4 tests, 75.00% okay
t/pod-coverage....skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed Test      Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/01-sysconfig.t    1   256     4    1  2
2 tests skipped.
Failed 1/4 test scripts. 1/5 subtests failed.
Files=4, Tests=5,  1 wallclock secs ( 0.40 cusr +  0.71 csys =  1.11 CPU)
Failed 1/4 test programs. 1/5 subtests failed.
*** Error code 35

Stop in /home/chris/.cpanplus/5.8.8/build/Test-Sysconfig-0.01 (line 761 of Makefile).

[MSG] [Thu Jun 28 02:14:07 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Test::Builder::Module              0.68        0
	  Test::More                         0.70        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Test-Sysconfig-0.01/blib/lib:/home/chris/.cpanplus/5.8.8/build/Test-Sysconfig-0.01/blib/arch:/home/chris/.cpanplus/5.8.8/build/Test-Sysconfig-0.01/blib
    PERL5_CPANPLUS_IS_RUNNING = 4048
    PERL5_CPANPLUS_IS_VERSION = 0.80
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 10 0 10
    EGID: $)  = 10 0 10


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi
    uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC  -L/usr/local/lib'

• FAIL Test-Sysconfig-0.01 OpenBSD.i386-openbsd-thread-multi 4.1 by chris