Front page | perl.cpan.testers |
Postings from June 2007
FAIL Acme-Godot-0.001000 OpenBSD.i386-openbsd-thread-multi 4.1
From:
chris
Date:
June 22, 2007 11:17
Subject:
FAIL Acme-Godot-0.001000 OpenBSD.i386-openbsd-thread-multi 4.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear SJN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Jun 22 20:07:51 2007] Trying to get 'http://www.cpan.org/authors/id/S/SJ/SJN/Acme-Godot-0.001000.tar.gz'
[MSG] [Fri Jun 22 20:07:52 2007] Trying to get 'http://www.cpan.org/authors/id/S/SJ/SJN/CHECKSUMS'
[MSG] [Fri Jun 22 20:07:53 2007] Checksum matches for 'Acme-Godot-0.001000.tar.gz'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/lib/'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/lib/Acme/'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/lib/Acme/Godot.pm'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/Changes'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/Build.PL'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/META.yml'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/MANIFEST'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/00_load.t'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/pod.t'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/version.t'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/kwalitee.t'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/perlcritic.t'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/pod-coverage.t'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/t/boilerplate.t'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme-Godot-0.001000/README'
[MSG] [Fri Jun 22 20:07:53 2007] Extracted 'Acme::Godot' to '/home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000'
[ERROR] [Fri Jun 22 20:07:53 2007] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Fri Jun 22 20:07:53 2007] No 'Makefile.PL' found - attempting to generate one
[MSG] [Fri Jun 22 20:07:54 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Acme::Godot
[MSG] [Fri Jun 22 20:07:54 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Jun 22 20:07:55 2007] cp lib/Acme/Godot.pm blib/lib/Acme/Godot.pm
Manifying blib/man3/Acme::Godot.3
[ERROR] [Fri Jun 22 20:07:56 2007] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.........Can't locate Test/Exception.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib/lib /home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib/arch /home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl . /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at t/00_load.t line 7.
BEGIN failed--compidubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
t/boilerplate.....lation aborted at t/00_load.t line 7.
# Looks like your test died before it could output anything.
skipped
all skipped: For authors only (set PERL_AUTHOR_TEST to run.)
t/kwalitee........skipped
all skipped: For authors only (set PERL_AUTHOR_TEST to run.)
t/perlcritic......Can't locate Perl/Critic/Utils.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib/lib /home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib/arch /home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl . /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at t/perlcritic.t line 17.
BEGIN failed--compilation aborted at t/perlcritic.t line 17.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
t/pod-coverage....skipped
all skipped: No point in covering an empty API
t/pod.............skipped
all skipped: Test::Pod 1.14 required for testing POD
t/version.........skipped
all skipped: For authors only (set PERL_AUTHOR_TEST to run.)
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/00_load.t 255 65280 1 2 1
t/perlcritic.t 255 65280 ?? ?? ??
5 tests skipped.
Failed 2/7 test scripts. 1/1 subtests failed.
Files=7, Tests=1, 1 wallclock secs ( 0.03 cusr + 0.94 csys = 0.97 CPU)
Failed 2/7 test programs. 1/1 subtests failed.
*** Error code 35
Stop in /home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000 (line 755 of Makefile).
[MSG] [Fri Jun 22 20:07:56 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Test::Exception
Perl::Critic::Utils
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'SJN (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Test::Exception' => '0', # or a minimum working version
'Perl::Critic::Utils' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib/lib:/home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib/arch:/home/chris/.cpanplus/5.8.8/build/Acme-Godot-0.001000/blib
PERL5_CPANPLUS_IS_RUNNING = 20071
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/ksh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/chris/perl588/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 10 0 10
EGID: $) = 10 0 10
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi
uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib'
-
FAIL Acme-Godot-0.001000 OpenBSD.i386-openbsd-thread-multi 4.1
by chris