Front page | perl.cpan.testers |
Postings from March 2007
FAIL B-LintSubs-0.03 i686-linux-thread-multi-64int-ld 2.6.16.38
Thread Previous
From:
chris
Date:
March 21, 2007 20:48
Subject:
FAIL B-LintSubs-0.03 i686-linux-thread-multi-64int-ld 2.6.16.38
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear PEVANS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Mar 22 03:39:44 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PEVANS/B-LintSubs-0.03.tar.gz'
[MSG] [Thu Mar 22 03:39:44 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PEVANS/CHECKSUMS'
[MSG] [Thu Mar 22 03:39:45 2007] Checksum matches for 'B-LintSubs-0.03.tar.gz'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/MANIFEST'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/META.yml'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/lib/'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/lib/B/'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/lib/B/LintSubs.pm'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/t/'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/t/01happy.t'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/Makefile.PL'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B-LintSubs-0.03/Build.PL'
[MSG] [Thu Mar 22 03:39:45 2007] Extracted 'B::LintSubs' to '/home/cpan/.cpanplus/5.8.8/build/B-LintSubs-0.03'
[MSG] [Thu Mar 22 03:39:47 2007] Checking if your kit is complete...
Looks good
Writing Makefile for B::LintSubs
[MSG] [Thu Mar 22 03:39:47 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Mar 22 03:39:50 2007] cp lib/B/LintSubs.pm blib/lib/B/LintSubs.pm
Manifying blib/man3/B::LintSubs.3
[ERROR] [Thu Mar 22 03:39:51 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01happy....Can't load '/home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/auto/B/B.so' for module B: /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/auto/B/B.so: undefined symbol: Perl_Icheckav_save_ptr at /home/cpan/perl588/lib/5.8.8/XSLoader.pm line 70.
at /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/B.pm line 303
Compilation failed in require at /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/O.pm line 5.
BEGIN failed--compilation aborted at /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/O.pm line 5.
Compilation failed in require.
BEGIN failed--compilation aborted.
# Failed test 'Simple print line'
# at t/01happy.t line 12.
# got: '65280'
# expected: '0'
# Looks like you failed 1 test of 1.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/01happy.t 1 256 1 1 1
Failed 1/1 test scripts. 1/1 subtests failed.
Files=1, Tests=1, 1 wallclock secs ( 0.04 cusr + 0.04 csys = 0.08 CPU)
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 1
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Test::More 0.67
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/B-LintSubs-0.03/blib/lib:/home/cpan/.cpanplus/5.8.8/build/B-LintSubs-0.03/blib/arch:/home/cpan/.cpanplus/5.8.8/build/B-LintSubs-0.03/blib
PERL5_CPANPLUS_IS_RUNNING = 4625
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl588/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement'
ccversion='', gccversion='4.0.3', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/local/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE'
cccdlflags='-fpic', lddlflags='-shared'
Thread Previous