FAIL B-LintSubs-0.03 i86pc-solaris-thread-multi-64int 2.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear PEVANS,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Mar 21 08:20:44 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PEVANS/B-LintSubs-0.03.tar.gz'
[MSG] [Wed Mar 21 08:21:10 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PEVANS/CHECKSUMS'
[MSG] [Wed Mar 21 08:21:45 2007] Checksum matches for 'B-LintSubs-0.03.tar.gz'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/MANIFEST'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/META.yml'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/lib/'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/lib/B/'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/lib/B/LintSubs.pm'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/t/'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/t/01happy.t'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/Makefile.PL'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B-LintSubs-0.03/Build.PL'
[MSG] [Wed Mar 21 08:21:48 2007] Extracted 'B::LintSubs' to '/export/home/chris/perl588/.cpanplus/5.8.8/build/B-LintSubs-0.03'
[MSG] [Wed Mar 21 08:21:54 2007] Checking if your kit is complete...
Looks good
Writing Makefile for B::LintSubs

[MSG] [Wed Mar 21 08:21:54 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Mar 21 08:22:08 2007] cp lib/B/LintSubs.pm blib/lib/B/LintSubs.pm
Manifying blib/man3/B::LintSubs.3

[ERROR] [Wed Mar 21 08:22:11 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01happy....Can't load '/export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/auto/B/B.so' for module B: ld.so.1: perl: fatal: relocation error: file /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/auto/B/B.so: symbol Perl_warn_nocontext: referenced symbol not found at /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/XSLoader.pm line 70.
 at /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/B.pm line 303
Compilation failed in require at /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/O.pm line 5.
BEGIN failed--compilation aborted at /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/O.pm line 5.
Compilation failed in require.
BEGIN failed--compilation aborted.

#   Failed test 'Simple print line'
#   at t/01happy.t line 12.
#          got: '65280'
#     expected: '0'
# Looks like you failed 1 test of 1.
dubious
	Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
	Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/01happy.t    1   256     1    1  1
Failed 1/1 test scripts. 1/1 subtests failed.
Files=1, Tests=1,  1 wallclock secs ( 0.06 cusr +  0.03 csys =  0.09 CPU)
Failed 1/1 test programs. 1/1 subtests failed.
*** Error code 1
make: Fatal error: Command failed for target `test_dynamic'


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Test::More                         0.67

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = C
    PATH = /export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:
    PERL5LIB = :/export/home/chris/perl588/.cpanplus/5.8.8/build/B-LintSubs-0.03/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/B-LintSubs-0.03/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/B-LintSubs-0.03/blib
    PERL5_CPANPLUS_IS_RUNNING = 18305
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/bash
    TERM = vt100

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /export/home/chris/perl588/bin/perl
    UID:  $<  = 100
    EUID: $>  = 100
    GID:  $(  = 1 1
    EGID: $)  = 1 1


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
    uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV',
    optimize='-O',
    cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib '
    libpth=/usr/local/lib /usr/lib /usr/ccs/lib
    libs=-lsocket -lnsl -ldl -lm -lpthread -lc
    perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
    libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='  -R /export/home/chris/perl588/lib/5.8.8/i86pc-solaris-thread-multi-64int/CORE'
    cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'

• FAIL B-LintSubs-0.03 i86pc-solaris-thread-multi-64int 2.10 by chris