FAIL IO-Simple-0.04 i686-linux-thread-multi-64int-ld 2.6.16.38

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear ERICJH,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Mar 12 21:04:41 2007] Trying to get 'http://www.cpan.org/authors/id/E/ER/ERICJH/IO-Simple-0.04.tar.gz'
[MSG] [Mon Mar 12 21:04:43 2007] Trying to get 'http://www.cpan.org/authors/id/E/ER/ERICJH/CHECKSUMS'
[MSG] [Mon Mar 12 21:04:44 2007] Checksum matches for 'IO-Simple-0.04.tar.gz'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/Changes'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/lib'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/Makefile.PL'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/MANIFEST'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/META.yml'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/README'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/t'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/t/IO-Simple.t'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/lib/IO'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO-Simple-0.04/lib/IO/Simple.pm'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted '/bin/tar: Read 2560 bytes from -'
[MSG] [Mon Mar 12 21:04:44 2007] Extracted 'IO::Simple' to '/home/cpan/.cpanplus/5.8.8/build/IO-Simple-0.04'
[MSG] [Mon Mar 12 21:04:44 2007] Checking if your kit is complete...
Looks good
Writing Makefile for IO::Simple

[MSG] [Mon Mar 12 21:04:44 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Mar 12 21:04:45 2007] cp lib/IO/Simple.pm blib/lib/IO/Simple.pm
Manifying blib/man3/IO::Simple.3

[ERROR] [Mon Mar 12 21:04:46 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/IO-Simple....Opening 't/data2' for 'r' failed: No such file or directory at t/IO-Simple.t line 39
# Looks like you planned 10 tests but only ran 6.
# Looks like your test died just after 6.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 7-10
	Failed 4/10 tests, 60.00% okay
Failed Test   Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/IO-Simple.t  255 65280    10    8  7-10
Failed 1/1 test scripts. 4/10 subtests failed.
Files=1, Tests=10,  0 wallclock secs ( 0.09 cusr +  0.07 csys =  0.16 CPU)
Failed 1/1 test programs. 4/10 subtests failed.



******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
    PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/IO-Simple-0.04/blib/lib:/home/cpan/.cpanplus/5.8.8/build/IO-Simple-0.04/blib/arch:/home/cpan/.cpanplus/5.8.8/build/IO-Simple-0.04/blib
    PERL5_CPANPLUS_IS_RUNNING = 23298
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
    uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement'
    ccversion='', gccversion='4.0.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =''
    libpth=/lib /usr/lib /usr/local/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE'
    cccdlflags='-fpic', lddlflags='-shared'

• FAIL IO-Simple-0.04 i686-linux-thread-multi-64int-ld 2.6.16.38 by chris