FAIL SCALP-0.0.3 i386-netbsd-thread-multi-64int 3.1

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear XSAWYERX,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Jan 23 16:49:42 2007] Trying to get 'http://www.cpan.org/authors/id/X/XS/XSAWYERX/SCALP-0.0.3.tar.gz'
[MSG] [Tue Jan 23 16:49:43 2007] Trying to get 'http://www.cpan.org/authors/id/X/XS/XSAWYERX/CHECKSUMS'
[MSG] [Tue Jan 23 16:49:44 2007] Checksum matches for 'SCALP-0.0.3.tar.gz'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/MANIFEST'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/README'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/Makefile.PL'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/Todo'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/Changes'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/META.yml'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/lib/'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/lib/SCALP/'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/lib/SCALP/Menu.pm'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/lib/SCALP/News.pm'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/lib/SCALP/Plain.pm'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/lib/SCALP.pm'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/t/'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/t/pod-coverage.t'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/t/pod.t'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/t/00-load.t'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP-0.0.3/t/boilerplate.t'
[MSG] [Tue Jan 23 16:49:44 2007] Extracted 'SCALP' to '/home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3'
[MSG] [Tue Jan 23 16:49:46 2007] Checking if your kit is complete...
Looks good
Writing Makefile for SCALP

[MSG] [Tue Jan 23 16:49:46 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jan 23 16:49:49 2007] cp lib/SCALP.pm blib/lib/SCALP.pm
cp lib/SCALP/Menu.pm blib/lib/SCALP/Menu.pm
cp lib/SCALP/Plain.pm blib/lib/SCALP/Plain.pm
cp lib/SCALP/News.pm blib/lib/SCALP/News.pm
Manifying blib/man3/SCALP::Plain.3
Manifying blib/man3/SCALP::Menu.3
Manifying blib/man3/SCALP.3
Manifying blib/man3/SCALP::News.3

[ERROR] [Tue Jan 23 16:49:52 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.........
#   Failed test 'use SCALP::News;'
#   at t/00-load.t line 8.
#     Tried to use 'SCALP::News'.
#     Error:  syntax error at /home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3/blib/lib/SCALP/News.pm line 38, near "};"
# syntax error at /home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3/blib/lib/SCALP/News.pm line 48, near "};"
# Missing right curly or square bracket at /home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3/blib/lib/SCALP/News.pm line 54, at end of line
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at t/00-load.t line 8.
# Testing SCALP 0.0.3, Perl 5.008008, /home/chris/perl588/bin/perl
# Looks like you failed 1 test of 4.
dubious
	Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 3
	Failed 1/4 tests, 75.00% okay
t/boilerplate.....ok
t/pod-coverage....
#   Failed test 'Pod coverage on SCALP'
#   at /home/chris/perl588/lib/site_perl/5.8.8/Test/Pod/Coverage.pm line 126.
# Coverage for SCALP is 28.6%, with 5 naked subroutines:
# 	get_entries
# 	get_entry
# 	get_last_entry
# 	postentry
# 	preentry
# Looks like you failed 1 test of 4.
dubious
	Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
	Failed 1/4 tests, 75.00% okay
t/pod.............skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed Test      Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/00-load.t         1   256     4    1  3
t/pod-coverage.t    1   256     4    1  1
1 test skipped.
Failed 2/4 test scripts. 2/14 subtests failed.
Files=4, Tests=14,  2 wallclock secs ( 1.70 cusr +  0.40 csys =  2.10 CPU)
Failed 2/4 test programs. 2/14 subtests failed.
*** Error code 25

Stop.
make: stopped in /home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Test::More                         0.67

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3/blib/lib:/home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3/blib/arch:/home/chris/.cpanplus/5.8.8/build/SCALP-0.0.3/blib
    PERL5_CPANPLUS_IS_RUNNING = 5263
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/sh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 0 100 0
    EGID: $)  = 0 100 0


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
    uname='netbsd nepta.bingosnet.co.uk 3.1 netbsd 3.1 (generic) #0: tue oct 31 04:27:07 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
    ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lm -lcrypt -lutil -lc -lposix -lpthread
    perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
    libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E  -Wl,-R/home/chris/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE'
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  -L/usr/pkg/lib'

• FAIL SCALP-0.0.3 i386-netbsd-thread-multi-64int 3.1 by chris