FAIL Konfidi-Client-1.0.3 MSWin32-x86-multi-thread 4.0

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear BRONDSEM,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.061. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[MSG] [Tue Jan  9 20:01:28 2007] Trying to get 'file://aliens/cpan/minicpan/authors/id/B/BR/BRONDSEM/Konfidi-Client-1.0.3.tar.gz'
[MSG] [Tue Jan  9 20:01:28 2007] Trying to get 'file://aliens/cpan/minicpan/authors/id/B/BR/BRONDSEM/CHECKSUMS'
[MSG] [Tue Jan  9 20:01:28 2007] Checksum matches for 'Konfidi-Client-1.0.3.tar.gz'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/dev/'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/dev/functional.t'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/dev/critic.t'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/unit-Response.t'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/pod.t'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/boilerplate.t'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/00-load.t'
[MSG] [Tue Jan  9 20:01:28 2007] Extracted 'Konfidi-Client-1.0.3/t/unit-Error.t'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/t/pod-coverage.t'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/t/unit-Client.t'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/lib/'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/lib/Konfidi/'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/lib/Konfidi/Client/'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/lib/Konfidi/Client/Error.pm'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/lib/Konfidi/Client.pm'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/lib/Konfidi/Response.pm'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/SIGNATURE'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/README'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/Changes'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/Build.PL'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/MANIFEST.SKIP'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/META.yml'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi-Client-1.0.3/MANIFEST'
[MSG] [Tue Jan  9 20:01:29 2007] Extracted 'Konfidi::Client' to 'C:\Dokumente und Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\Konfidi-Client-1.0.3'
[ERROR] [Tue Jan  9 20:11:24 2007] Could not run 'Build test': Failed 3/7 test scripts, 57.14% okay. 7/33 subtests failed, 78.79% okay.


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Carp                               1.03
	Error                              0.15
	LWP::UserAgent                    2.033
	Scalar::Util                       1.17

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
  Platform:
    osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
    uname=''
    config_args='undef'
    hint=recommended, useposix=true, d_sigaction=undef
    usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cl', ccflags ='-nologo -GF -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT  -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX',
    optimize='-MD -Zi -DNDEBUG -O1',
    cppflags='-DWIN32'
    ccversion='', gccversion='', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf  -libpath:"c:\perl\5.8.5\lib\CORE"  -machine:x86'
    libpth="C:\Programme\Microsoft Visual C++ Toolkit 2003\lib"
    libs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib msvcrt.lib
    perllibs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib msvcrt.lib
    libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib
    gnulibc_version='undef'
  Dynamic Linking:
    dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf  -libpath:"c:\perl\5.8.5\lib\CORE"  -machine:x86'

• FAIL Konfidi-Client-1.0.3 MSWin32-x86-multi-thread 4.0 by corion-cpanplus