Front page | perl.cpan.testers |
Postings from October 2006
FAIL File-BOM-0.13 i386-freebsd-64int 5.3-release
From:
chris
Date:
October 9, 2006 07:40
Subject:
FAIL File-BOM-0.13 i386-freebsd-64int 5.3-release
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear MATTLAW,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.074. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Oct 9 15:39:27 2006] Trying to get 'http://www.cpan.org/authors/id/M/MA/MATTLAW/File-BOM-0.13.tar.gz'
[MSG] [Mon Oct 9 15:39:27 2006] Trying to get 'http://www.cpan.org/authors/id/M/MA/MATTLAW/CHECKSUMS'
[MSG] [Mon Oct 9 15:39:28 2006] Checksum matches for 'File-BOM-0.13.tar.gz'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/data/'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/data/broken_bom.txt'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/99..shutdown.t'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/03..exceptions.t'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/04..pod.t'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/lib/'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/lib/Test/'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/lib/Test/Framework.pm'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/02..perlio-via.t'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/00..setup.t'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/t/01..bom.t'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/lib/'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/lib/File/'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/lib/File/BOM.pm'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/Changes'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/MANIFEST'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/TODO'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/README-cygwin'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/META.yml'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/README'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/Makefile.PL'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File-BOM-0.13/Build.PL'
[MSG] [Mon Oct 9 15:39:28 2006] Extracted 'File::BOM' to '/home/cwill1is/.cpanplus/5.8.5/build/File-BOM-0.13'
[MSG] [Mon Oct 9 15:39:29 2006] # running Build.PL
/usr/bin/perl Build.PL
- ERROR: Readonly is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Creating new 'Build' script for 'File-BOM' version '0.13'
[MSG] [Mon Oct 9 15:39:29 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Oct 9 15:39:29 2006] Module 'File::BOM' requires 'Readonly' version '0.06' to be installed
[MSG] [Mon Oct 9 15:39:29 2006] Trying to get 'http://www.cpan.org/authors/id/R/RO/ROODE/CHECKSUMS'
[MSG] [Mon Oct 9 15:39:29 2006] Checksum matches for 'Readonly-1.03.tar.gz'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/benchmark.pl'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/Changes'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/Makefile.PL'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/MANIFEST'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/META.yml'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/README'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/Readonly.pm'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/array.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/deepa.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/deeph.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/deeps.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/docs.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/export.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/hash.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/readonly.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/reassign.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/scalar.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly-1.03/t/tie.t'
[MSG] [Mon Oct 9 15:39:30 2006] Extracted 'Readonly' to '/home/cwill1is/.cpanplus/5.8.5/build/Readonly-1.03'
[MSG] [Mon Oct 9 15:39:30 2006] Writing Makefile for Readonly
[MSG] [Mon Oct 9 15:39:30 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Oct 9 15:39:30 2006] Manifying blib/man3/Readonly.3
[MSG] [Mon Oct 9 15:39:31 2006] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/array.......ok
t/deepa.......ok
t/deeph.......ok
t/deeps.......ok
t/docs........ok
t/export......ok
t/hash........ok
t/readonly....ok
9/19 skipped: various reasons
t/reassign....ok
7/22 skipped: various reasons
t/scalar......ok
t/tie.........ok
All tests successful, 16 subtests skipped.
Files=11, Tests=170, 1 wallclock secs ( 0.49 cusr + 0.11 csys = 0.60 CPU)
[MSG] [Mon Oct 9 15:39:31 2006] Ok, not sending test report
[MSG] [Mon Oct 9 15:39:32 2006] /usr/bin/perl Build --makefile_env_macros 1
lib/File/BOM.pm -> blib/lib/File/BOM.pm
Manifying blib/lib/File/BOM.pm -> blib/libdoc/File::BOM.3
[ERROR] [Mon Oct 9 15:39:33 2006] MAKE TEST failed: No such file or directory /usr/bin/perl Build --makefile_env_macros 1 test
t/00..setup.........ok
t/01..bom...........
# Failed test 'Read UTF-8 data from unseekable source'
# in t/01..bom.t at line 143.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test 'read defused fifo OK (UTF-8)'
# in t/01..bom.t at line 156.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test 'Read UTF-16LE data from unseekable source'
# in t/01..bom.t at line 143.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test 'read defused fifo OK (UTF-16LE)'
# in t/01..bom.t at line 156.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test 'Read UTF-16BE data from unseekable source'
# in t/01..bom.t at line 143.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test 'read defused fifo OK (UTF-16BE)'
# in t/01..bom.t at line 156.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test 'Read UTF-32LE data from unseekable source'
# in t/01..bom.t at line 143.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test 'read defused fifo OK (UTF-32LE)'
# in t/01..bom.t at line 156.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test 'Read UTF-32BE data from unseekable source'
# in t/01..bom.t at line 143.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test 'read defused fifo OK (UTF-32BE)'
# in t/01..bom.t at line 156.
Wide character in print at /usr/local/lib/perl5/5.8.5/Test/Builder.pm line 1199.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test '.. spillage was produced'
# in t/01..bom.t at line 189.
# Failed test 'spillage + content as expected'
# in t/01..bom.t at line 190.
# got: ''
# expected: 'ÿÿThis file has a broken BOM'
# Looks like you failed 12 tests of 115.
dubious
Test returned status 12 (wstat 3072, 0xc00)
DIED. FAILED tests 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 109-110
Failed 12/115 tests, 89.57% okay
t/02..perlio-via....ok
t/03..exceptions....
# Failed test '_get_encoding_seekable on unseekable handle fails'
# in t/03..exceptions.t at line 71.
# expecting: Regexp ((?-xism:^Couldn't reset read position))
# found: normal exit
# Failed test 'get_encoding_from_filehandle on unseekable handle fails'
# in t/03..exceptions.t at line 75.
# expecting: Regexp ((?-xism:^Unseekable handle))
# found: normal exit
# Looks like you failed 2 tests of 10.
dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 7-8
Failed 2/10 tests, 80.00% okay
t/04..pod...........ok
1/2 skipped: various reasons
t/99..shutdown......ok
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/01..bom.t 12 3072 115 12 87 89 91 93 95 97 99 101 103 105 109-
110
t/03..exceptions.t 2 512 10 2 7-8
1 subtest skipped.
Failed 2/6 test scripts. 14/196 subtests failed.
Files=6, Tests=196, 1 wallclock secs ( 0.66 cusr + 0.27 csys = 0.93 CPU)
Failed 2/6 test programs. 14/196 subtests failed.
*** Error code 25
Stop in /usr/home/cwill1is/.cpanplus/5.8.5/build/File-BOM-0.13.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Encode 2.18
Module::Build 0.2805
Readonly 1.03
Test::Exception 0.23
Test::More 0.64
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
Platform:
osname=freebsd, osvers=5.3-release, archname=i386-freebsd-64int
uname='freebsd freebsd.org 5.3-release freebsd 5.3-release #0: fri oct 15 12:04:25 pdt 2004 kris@freebsd.org:usrsrcsysmagickernelpath i386 '
config_args='-sde -Dprefix=/usr/local -Darchlib=/usr/local/lib/perl5/5.8.5/mach -Dprivlib=/usr/local/lib/perl5/5.8.5 -Dman3dir=/usr/local/lib/perl5/5.8.5/perl/man/man3 -Dman1dir=/usr/local/man/man1 -Dsitearch=/usr/local/lib/perl5/site_perl/5.8.5/mach -Dsitelib=/usr/local/lib/perl5/site_perl/5.8.5 -Dscriptdir=/usr/local/bin -Dsiteman3dir=/usr/local/lib/perl5/5.8.5/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl -Dcc=cc -Doptimize=-O -pipe -Duseshrplib -Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.5/BSDPAN" -Ud_dosuid -Ui_gdbm -Dusethreads=n -Dusemymalloc=y -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.5/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O -pipe ',
cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.5/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.4.2 [FreeBSD] 20040728', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-R/usr/local/lib/perl5/5.8.5/mach/CORE'
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL File-BOM-0.13 i386-freebsd-64int 5.3-release
by chris