Front page | perl.cpan.testers |
Postings from September 2006
FAIL HTML-Sanitizer-0.04 i486-linux-gnu-thread-multi 2.6.15-1-686
From:
dpavlin
Date:
September 23, 2006 07:57
Subject:
FAIL HTML-Sanitizer-0.04 i486-linux-gnu-thread-multi 2.6.15-1-686
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear David Nesting,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.061. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Sep 23 16:56:59 2006] Checking if source files are up to date
[MSG] [Sat Sep 23 16:56:59 2006] Retrieving /home/dpavlin/.cpanplus/sourcefiles.2.15.stored
[MSG] [Sat Sep 23 16:57:03 2006] Trying to get 'http://www.cpan.org/authors/id/N/NE/NESTING/HTML-Sanitizer-0.04.tar.gz'
[MSG] [Sat Sep 23 16:57:03 2006] Trying to get 'http://www.cpan.org/authors/id/N/NE/NESTING/CHECKSUMS'
[MSG] [Sat Sep 23 16:57:04 2006] Checksum matches for 'HTML-Sanitizer-0.04.tar.gz'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/Sanitizer.pm'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/t/'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/t/02functions.t'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/t/03security.t'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/t/01rules.t'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/Changes'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/MANIFEST'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/Makefile.PL'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML-Sanitizer-0.04/README'
[MSG] [Sat Sep 23 16:57:04 2006] Extracted 'HTML::Sanitizer' to '/home/dpavlin/.cpanplus/5.8.8/build/HTML-Sanitizer-0.04'
[MSG] [Sat Sep 23 16:57:04 2006] Checking if your kit is complete...
Looks good
Writing Makefile for HTML::Sanitizer
[MSG] [Sat Sep 23 16:57:04 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Sep 23 16:57:05 2006] make[1]: Entering directory `/home/dpavlin/.cpanplus/5.8.8/build/HTML-Sanitizer-0.04'
cp Sanitizer.pm blib/lib/HTML/Sanitizer.pm
Manifying blib/man3/HTML::Sanitizer.3pm
make[1]: Leaving directory `/home/dpavlin/.cpanplus/5.8.8/build/HTML-Sanitizer-0.04'
[ERROR] [Sat Sep 23 16:57:05 2006] MAKE TEST failed: No such file or directory make[1]: Entering directory `/home/dpavlin/.cpanplus/5.8.8/build/HTML-Sanitizer-0.04'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01rules........ok
t/02functions....ok
t/03security.....
# Failed test 'HTML/XML entities'
# in t/03security.t at line 35.
# got: '<p>unsafe</p>'
# expected: '<p>unsafe</p><script'
# Failed test 'HTML/XML entities with incomplete tag'
# in t/03security.t at line 40.
# got: ''
# expected: '<p attr_ok="test>unsafe</p>'
# Looks like you failed 2 tests of 4.
dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 3-4
Failed 2/4 tests, 50.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/03security.t 2 512 4 2 3-4
Failed 1/3 test scripts. 2/38 subtests failed.
Files=3, Tests=38, 0 wallclock secs ( 0.28 cusr + 0.04 csys = 0.32 CPU)
Failed 1/3 test programs. 2/38 subtests failed.
make[1]: *** [test_dynamic] Error 2
make[1]: Leaving directory `/home/dpavlin/.cpanplus/5.8.8/build/HTML-Sanitizer-0.04'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
HTML::TreeBuilder 3.21
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.15-1-686, archname=i486-linux-gnu-thread-multi
uname='linux ulises 2.6.15-1-686 #2 mon mar 6 15:27:08 utc 2006 i686 gnulinux '
config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN -Dcccdlflags=-fPIC -Darchname=i486-linux-gnu -Dprefix=/usr -Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr -Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5 -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.8 -Dsitearch=/usr/local/lib/perl/5.8.8 -Dman1dir=/usr/share/man/man1 -Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl -Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib -Dlibperl=libperl.so.5.8.8 -Dd_dosuid -des'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20060729 (prerelease) (Debian 4.1.1-10)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lgdbm -lgdbm_compat -ldb -ldl -lm -lpthread -lc -lcrypt
perllibs=-ldl -lm -lpthread -lc -lcrypt
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so.5.8.8
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL HTML-Sanitizer-0.04 i486-linux-gnu-thread-multi 2.6.15-1-686
by dpavlin