FAIL SDP-0.1 x86_64-linux-thread-multi-ld 2.6.16.14

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear DBIALAC,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.072. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Jul 25 00:11:41 2006] Trying to get 'http://www.cpan.org/authors/id/D/DB/DBIALAC/SDP/SDP-0.1.tar.gz'
[MSG] [Tue Jul 25 00:11:42 2006] Trying to get 'http://www.cpan.org/authors/id/D/DB/DBIALAC/SDP/CHECKSUMS'
[MSG] [Tue Jul 25 00:11:43 2006] Checksum matches for 'SDP-0.1.tar.gz'
[MSG] [Tue Jul 25 00:11:43 2006] Extracted 'SDP-0.1/'
[MSG] [Tue Jul 25 00:11:43 2006] Extracted 'SDP-0.1/.cvsignore'
[MSG] [Tue Jul 25 00:11:43 2006] Extracted 'SDP-0.1/Changes'
[MSG] [Tue Jul 25 00:11:44 2006] Extracted 'SDP-0.1/MANIFEST'
[MSG] [Tue Jul 25 00:11:44 2006] Extracted 'SDP-0.1/Makefile.PL'
[MSG] [Tue Jul 25 00:11:44 2006] Extracted 'SDP-0.1/README'
[MSG] [Tue Jul 25 00:11:44 2006] Extracted 'SDP-0.1/lib/'
[MSG] [Tue Jul 25 00:11:44 2006] Extracted 'SDP-0.1/lib/IO/'
[MSG] [Tue Jul 25 00:11:44 2006] Extracted 'SDP-0.1/lib/IO/DB.pm'
[MSG] [Tue Jul 25 00:11:45 2006] Extracted 'SDP-0.1/t/'
[MSG] [Tue Jul 25 00:11:45 2006] Extracted 'SDP-0.1/t/00.load.t'
[MSG] [Tue Jul 25 00:11:45 2006] Extracted 'SDP-0.1/t/pod-coverage.t'
[MSG] [Tue Jul 25 00:11:45 2006] Extracted 'SDP-0.1/t/pod.t'
[MSG] [Tue Jul 25 00:11:45 2006] Extracted 'SDP' to '/opt/perl/testers/.cpanplus/5.8.8/build/SDP-0.1'
[MSG] [Tue Jul 25 00:11:46 2006] Checking if your kit is complete...
Warning: the following files are missing in your kit:
	META.yml
Please inform the author.
Warning: prerequisite DBD 0 not found.
Writing Makefile for IO::DB

[MSG] [Tue Jul 25 00:11:46 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Tue Jul 25 00:11:46 2006] No such module 'DBD' found on CPAN
[MSG] [Tue Jul 25 00:11:47 2006] cp lib/IO/DB.pm blib/lib/IO/DB.pm
Manifying blib/man3/IO::DB.3

[ERROR] [Tue Jul 25 00:11:48 2006] MAKE TEST failed: ¨S¦³¦¹¤@ÀɮשΥؿý t/00.load.........# Testing IO::DB 0.1
ok
t/pod-coverage....
#   Failed test 'Pod coverage on IO::DB'
#   in /opt/perl/testers/lib/site_perl/5.8.8/Test/Pod/Coverage.pm at line 126.
# Coverage for IO::DB is 75.0%, with 2 naked subroutines:
# 	get_column_types
# 	get_columns
# Looks like you failed 1 test of 1.
dubious
	Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
	Failed 1/1 tests, 0.00% okay
t/pod.............ok
Failed Test      Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/pod-coverage.t    1   256     1    1  1
Failed 1/3 test scripts. 1/3 subtests failed.
Files=3, Tests=3,  0 wallclock secs ( 0.21 cusr +  0.12 csys =  0.33 CPU)
Failed 1/3 test programs. 1/3 subtests failed.
make: *** [test_dynamic] Error 255


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Test::More                         0.64

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.2'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL SDP-0.1 x86_64-linux-thread-multi-ld 2.6.16.14 by imacat