Front page | perl.cpan.testers |
Postings from July 2006
FAIL Class-DBI-FormBuilder-0.481 x86_64-linux-thread-multi-ld 2.6.16.14
From:
imacat
Date:
July 17, 2006 05:58
Subject:
FAIL Class-DBI-FormBuilder-0.481 x86_64-linux-thread-multi-ld 2.6.16.14
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear David R. Baird,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.061. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Jul 17 20:48:30 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAVEBAIRD/Maypole-FormBuilder-0.1.tar.gz'
[MSG] [Mon Jul 17 20:48:32 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAVEBAIRD/CHECKSUMS'
[MSG] [Mon Jul 17 20:48:35 2006] Checksum matches for 'Maypole-FormBuilder-0.1.tar.gz'
[MSG] [Mon Jul 17 20:48:36 2006] Extracted 'Maypole-FormBuilder-0.1'
[MSG] [Mon Jul 17 20:48:36 2006] Extracted 'Maypole-FormBuilder-0.1/lib'
[MSG] [Mon Jul 17 20:48:36 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole'
[MSG] [Mon Jul 17 20:48:36 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/Plugin'
[MSG] [Mon Jul 17 20:48:36 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/Plugin/FormBuilder.pm'
[MSG] [Mon Jul 17 20:48:36 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/FormBuilder'
[MSG] [Mon Jul 17 20:48:36 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/FormBuilder/Model.pm'
[MSG] [Mon Jul 17 20:48:37 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/FormBuilder/View.pm'
[MSG] [Mon Jul 17 20:48:37 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/FormBuilder/Model'
[MSG] [Mon Jul 17 20:48:37 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/FormBuilder/Model/Base.pm'
[MSG] [Mon Jul 17 20:48:37 2006] Extracted 'Maypole-FormBuilder-0.1/lib/Maypole/FormBuilder.pm'
[MSG] [Mon Jul 17 20:48:37 2006] Extracted 'Maypole-FormBuilder-0.1/templates'
[MSG] [Mon Jul 17 20:48:37 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory'
[MSG] [Mon Jul 17 20:48:38 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/autohandler'
[MSG] [Mon Jul 17 20:48:38 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/view_related'
[MSG] [Mon Jul 17 20:48:38 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/editlist'
[MSG] [Mon Jul 17 20:48:38 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/pager'
[MSG] [Mon Jul 17 20:48:38 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/edit'
[MSG] [Mon Jul 17 20:48:38 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/list'
[MSG] [Mon Jul 17 20:48:38 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/view'
[MSG] [Mon Jul 17 20:48:39 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/search'
[MSG] [Mon Jul 17 20:48:39 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/frontpage'
[MSG] [Mon Jul 17 20:48:39 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/dhandler'
[MSG] [Mon Jul 17 20:48:39 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/css'
[MSG] [Mon Jul 17 20:48:39 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/css/maypole.css'
[MSG] [Mon Jul 17 20:48:39 2006] Extracted 'Maypole-FormBuilder-0.1/templates/factory/addnew'
[MSG] [Mon Jul 17 20:48:39 2006] Extracted 'Maypole-FormBuilder-0.1/templates/beer'
[MSG] [Mon Jul 17 20:48:40 2006] Extracted 'Maypole-FormBuilder-0.1/templates/beer/css'
[MSG] [Mon Jul 17 20:48:40 2006] Extracted 'Maypole-FormBuilder-0.1/templates/beer/css/beer.css'
[MSG] [Mon Jul 17 20:48:40 2006] Extracted 'Maypole-FormBuilder-0.1/Changes'
[MSG] [Mon Jul 17 20:48:40 2006] Extracted 'Maypole-FormBuilder-0.1/MANIFEST'
[MSG] [Mon Jul 17 20:48:40 2006] Extracted 'Maypole-FormBuilder-0.1/META.yml'
[MSG] [Mon Jul 17 20:48:40 2006] Extracted 'Maypole-FormBuilder-0.1/t'
[MSG] [Mon Jul 17 20:48:40 2006] Extracted 'Maypole-FormBuilder-0.1/t/00-load.t'
[MSG] [Mon Jul 17 20:48:41 2006] Extracted 'Maypole-FormBuilder-0.1/t/pod-coverage.t'
[MSG] [Mon Jul 17 20:48:41 2006] Extracted 'Maypole-FormBuilder-0.1/t/pod.t'
[MSG] [Mon Jul 17 20:48:41 2006] Extracted 'Maypole-FormBuilder-0.1/Makefile.PL'
[MSG] [Mon Jul 17 20:48:41 2006] Extracted 'Maypole-FormBuilder-0.1/Build.PL'
[MSG] [Mon Jul 17 20:48:41 2006] Extracted 'Maypole-FormBuilder-0.1/README'
[MSG] [Mon Jul 17 20:48:41 2006] Extracted 'Maypole::FormBuilder' to '/opt/perl/testers/.cpanplus/5.8.8/build/Maypole-FormBuilder-0.1'
[MSG] [Mon Jul 17 20:48:42 2006] Checking if your kit is complete...
Looks good
Warning: prerequisite Class::DBI::AbstractSearch 0 not found.
Warning: prerequisite Class::DBI::Loader 0 not found.
Warning: prerequisite Class::DBI::Pager 0 not found.
Warning: prerequisite Class::DBI::Plugin::RetrieveAll 0 not found.
Warning: prerequisite Maypole::Config 0 not found.
Warning: prerequisite Maypole::Model::Base 0 not found.
Warning: prerequisite UNIVERSAL::require 0 not found.
Writing Makefile for Maypole::FormBuilder
[MSG] [Mon Jul 17 20:48:42 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Jul 17 20:48:42 2006] Module 'Maypole::FormBuilder' requires 'Class::DBI' version '0' to be installed
[MSG] [Mon Jul 17 20:48:43 2006] Module 'Maypole::FormBuilder' requires 'Class::DBI::AbstractSearch' version '0' to be installed
[MSG] [Mon Jul 17 20:48:43 2006] Module 'Maypole::FormBuilder' requires 'Class::DBI::FormBuilder' version '0' to be installed
[MSG] [Mon Jul 17 20:48:43 2006] Module 'Maypole::FormBuilder' requires 'Class::DBI::Loader' version '0' to be installed
[MSG] [Mon Jul 17 20:48:43 2006] Module 'Maypole::FormBuilder' requires 'Class::DBI::Pager' version '0' to be installed
[MSG] [Mon Jul 17 20:48:43 2006] Module 'Maypole::FormBuilder' requires 'Class::DBI::Plugin::RetrieveAll' version '0' to be installed
[MSG] [Mon Jul 17 20:48:43 2006] Module 'Maypole::FormBuilder' requires 'Maypole::Config' version '0' to be installed
[MSG] [Mon Jul 17 20:48:43 2006] Module 'Maypole::FormBuilder' requires 'Maypole::Model::Base' version '0' to be installed
[MSG] [Mon Jul 17 20:48:44 2006] Module 'Maypole::FormBuilder' requires 'UNIVERSAL::require' version '0' to be installed
[MSG] [Mon Jul 17 20:48:44 2006] Writing Makefile for Class::DBI
[MSG] [Mon Jul 17 20:48:44 2006] Module 'Class::DBI' requires 'Class::Accessor' version '0.18' to be installed
[MSG] [Mon Jul 17 20:48:45 2006] Module 'Class::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:48:45 2006] Module 'Class::DBI' requires 'Class::Trigger' version '0.07' to be installed
[MSG] [Mon Jul 17 20:48:45 2006] Module 'Class::DBI' requires 'Clone' version '0' to be installed
[MSG] [Mon Jul 17 20:48:45 2006] Module 'Class::DBI' requires 'Ima::DBI' version '0.33' to be installed
[MSG] [Mon Jul 17 20:48:45 2006] Module 'Class::DBI' requires 'UNIVERSAL::moniker' version '0.06' to be installed
[MSG] [Mon Jul 17 20:48:45 2006] Module 'Class::DBI' requires 'version' version '0' to be installed
[MSG] [Mon Jul 17 20:48:46 2006] Writing Makefile for Class::Accessor
[MSG] [Mon Jul 17 20:48:46 2006] Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor.3
[MSG] [Mon Jul 17 20:48:47 2006] MAKE TEST passed: t/accessors....ok
t/croak........ok
t/getset.......ok
All tests successful.
Files=3, Tests=31, 0 wallclock secs ( 0.12 cusr + 0.04 csys = 0.16 CPU)
[MSG] [Mon Jul 17 20:48:47 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:48:47 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:48:48 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:48:48 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.20 cusr + 0.05 csys = 0.25 CPU)
[MSG] [Mon Jul 17 20:48:49 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:48:49 2006] Writing Makefile for Class::Trigger
[MSG] [Mon Jul 17 20:48:49 2006] Module 'Class::Trigger' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:48:49 2006] Module 'Class::Trigger' requires 'IO::Scalar' version '0' to be installed
[MSG] [Mon Jul 17 20:48:50 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:48:50 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:48:51 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.20 cusr + 0.07 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:48:51 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:48:52 2006] Writing Makefile for IO::Stringy
[MSG] [Mon Jul 17 20:48:52 2006] Manifying blib/man3/IO::Lines.3
Manifying blib/man3/IO::ScalarArray.3
Manifying blib/man3/IO::Stringy.3
Manifying blib/man3/IO::Wrap.3
Manifying blib/man3/IO::AtomicFile.3
Manifying blib/man3/IO::Scalar.3
Manifying blib/man3/IO::InnerFile.3
Manifying blib/man3/IO::WrapTie.3
[MSG] [Mon Jul 17 20:48:53 2006] MAKE TEST passed: t/IO_Lines..........ok
t/IO_Scalar.........ok
t/IO_ScalarArray....ok
t/IO_WrapTie........ok
t/simple............ok
t/two...............ok
All tests successful.
Files=6, Tests=116, 0 wallclock secs ( 0.34 cusr + 0.06 csys = 0.40 CPU)
[MSG] [Mon Jul 17 20:48:53 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:48:54 2006] Manifying blib/man3/Class::Trigger.3
[MSG] [Mon Jul 17 20:48:54 2006] MAKE TEST passed: t/00_compile.....ok
t/01_trigger.....ok
t/02_valid.......ok
t/03_inherit.....ok
t/04_object......ok
t/05_args........ok
t/06_coverage....ok
All tests successful.
Files=7, Tests=27, 0 wallclock secs ( 0.26 cusr + 0.15 csys = 0.41 CPU)
[MSG] [Mon Jul 17 20:48:55 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:48:55 2006] Writing Makefile for Clone
[MSG] [Mon Jul 17 20:48:56 2006] Running Mkbootstrap for Clone ()
Manifying blib/man3/Clone.3
[MSG] [Mon Jul 17 20:48:57 2006] MAKE TEST passed: t/01array.....ok
t/02hash......ok
t/03scalar....ok
t/04tie.......ok
t/05dtype.....ok
t/06refcnt....ok
t/07magic.....ok
1/2 skipped: Taint::Runtime not installed
t/dclone......ok
All tests successful, 1 subtest skipped.
Files=8, Tests=56, 1 wallclock secs ( 0.22 cusr + 0.13 csys = 0.35 CPU)
[MSG] [Mon Jul 17 20:48:57 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:48:57 2006] Writing Makefile for Ima::DBI
[MSG] [Mon Jul 17 20:48:57 2006] Module 'Ima::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:48:58 2006] Module 'Ima::DBI' requires 'DBI' version '1.2' to be installed
[MSG] [Mon Jul 17 20:48:58 2006] Module 'Ima::DBI' requires 'DBIx::ContextualFetch' version '1' to be installed
[MSG] [Mon Jul 17 20:48:58 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:48:59 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:48:59 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.23 cusr + 0.04 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:48:59 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:49:10 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:49:16 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:49:26 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 10 wallclock secs ( 7.84 cusr + 1.16 csys = 9.00 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU)
Testing handle creation speed...
21276 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:49:26 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:49:27 2006] Writing Makefile for DBIx::ContextualFetch
[MSG] [Mon Jul 17 20:49:27 2006] Module 'DBIx::ContextualFetch' requires 'DBI' version '1.35' to be installed
[MSG] [Mon Jul 17 20:49:38 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:49:44 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:49:54 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 9 wallclock secs ( 7.75 cusr + 1.22 csys = 8.97 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 1 wallclock secs ( 0.00 usr + 0.01 sys = 0.01 CPU)
Testing handle creation speed...
21276 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:49:54 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:49:55 2006] Manifying blib/man3/DBIx::ContextualFetch.3
[MSG] [Mon Jul 17 20:49:55 2006] MAKE TEST passed: t/01..............skipped
all skipped: needs DBD::SQLite for testing
t/pod-coverage....ok
t/pod.............ok
All tests successful, 1 test skipped.
Files=3, Tests=2, 0 wallclock secs ( 0.17 cusr + 0.09 csys = 0.26 CPU)
[MSG] [Mon Jul 17 20:49:55 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:49:56 2006] Manifying blib/man3/Ima::DBI.3
[MSG] [Mon Jul 17 20:49:57 2006] MAKE TEST passed: t/DBI.............ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=29, 1 wallclock secs ( 0.32 cusr + 0.06 csys = 0.38 CPU)
[MSG] [Mon Jul 17 20:49:57 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:49:57 2006] Hello!
We no longer depend on Lingua::EN::Inflect.
If you care about plurals, you should install it.
Writing Makefile for UNIVERSAL::moniker
[MSG] [Mon Jul 17 20:49:58 2006] Manifying blib/man3/UNIVERSAL::moniker.3
[MSG] [Mon Jul 17 20:49:58 2006] MAKE TEST passed: t/moniker....ok
All tests successful.
Files=1, Tests=4, 0 wallclock secs ( 0.06 cusr + 0.01 csys = 0.07 CPU)
[MSG] [Mon Jul 17 20:49:58 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:49:59 2006] # running Build.PL
/opt/perl/testers/bin/perl Build.PL
Deleting _build
Creating custom builder _build/lib/version/Builder.pm in _build/lib/version
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
gcc -I/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE -fPIC -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -o /tmp/compilet.o /tmp/compilet.c
gcc -shared -L/usr/local/lib -o /tmp/compilet.so /tmp/compilet.o
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Deleting Build
Removed previous script 'Build'
Creating new 'Build' script for 'version' version '0.64'
Unknown 'build_class', defaulting to 'Module::Build'
[MSG] [Mon Jul 17 20:50:00 2006]
[MSG] [Mon Jul 17 20:50:01 2006] MAKE TEST passed: t/01base.......ok
t/02derived....ok
t/03require....ok
4/126 skipped: version require'd instead of use'd, cannot test qv
All tests successful, 4 subtests skipped.
Files=3, Tests=388, 0 wallclock secs ( 0.32 cusr + 0.04 csys = 0.36 CPU)
[MSG] [Mon Jul 17 20:50:01 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:02 2006] Manifying blib/man3/Class::DBI.3
Manifying blib/man3/Class::DBI::Test::SQLite.3
Manifying blib/man3/Class::DBI::Attribute.3
Manifying blib/man3/Class::DBI::Cascade::None.3
Manifying blib/man3/Class::DBI::Search::Basic.3
Manifying blib/man3/Class::DBI::ColumnGrouper.3
Manifying blib/man3/Class::DBI::Cascade::Delete.3
Manifying blib/man3/Class::DBI::SQL::Transformer.3
Manifying blib/man3/Class::DBI::Relationship.3
Manifying blib/man3/Class::DBI::Cascade::Fail.3
Manifying blib/man3/Class::DBI::Column.3
Manifying blib/man3/Class::DBI::Query.3
Manifying blib/man3/Class::DBI::Iterator.3
[MSG] [Mon Jul 17 20:50:04 2006] MAKE TEST passed: t/01-columns.............ok
t/02-Film................skipped
all skipped: needs DBD::SQLite for testing
t/03-subclassing.........skipped
all skipped: needs DBD::SQLite for testing
t/04-lazy................skipped
all skipped: needs DBD::SQLite for testing
t/05-Query...............skipped
all skipped: needs DBD::SQLite for testing
t/06-hasa................skipped
all skipped: needs DBD::SQLite for testing
t/08-inheritcols.........ok
t/09-has_many............skipped
all skipped: needs DBD::SQLite for testing
t/10-mysql...............skipped
all skipped: Need Date::Simple for this test
t/11-triggers............skipped
all skipped: needs DBD::SQLite for testing
t/12-filter..............skipped
all skipped: needs DBD::SQLite for testing
t/13-constraint..........skipped
all skipped: needs DBD::SQLite for testing
t/14-might_have..........skipped
all skipped: needs DBD::SQLite for testing
t/15-accessor............skipped
all skipped: needs DBD::SQLite for testing
t/16-reserved............skipped
all skipped: needs DBD::SQLite for testing
t/17-data_type...........skipped
all skipped: needs DBD::Pg for testing
t/18-has_a...............skipped
all skipped: needs DBD::SQLite for testing
t/19-set_sql.............skipped
all skipped: needs DBD::SQLite for testing
t/21-iterator............skipped
all skipped: needs DBD::SQLite for testing
t/22-deflate_order.......skipped
all skipped: Need Time::Piece::MySQL for this test
t/23-cascade.............skipped
all skipped: needs DBD::SQLite for testing
t/24-meta_info...........ok
t/25-closures_in_meta....skipped
all skipped: Need MySQL for this test
t/26-mutator.............skipped
all skipped: needs DBD::SQLite for testing
t/97-pod.................ok
t/98-failure.............skipped
all skipped: needs DBD::SQLite for testing
t/99-misc................skipped
all skipped: needs DBD::SQLite for testing
All tests successful, 23 tests skipped.
Files=27, Tests=48, 2 wallclock secs ( 1.32 cusr + 0.36 csys = 1.68 CPU)
[MSG] [Mon Jul 17 20:50:04 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:04 2006] Trying to get 'http://www.cpan.org/authors/id/M/MI/MIYAGAWA/Class-DBI-AbstractSearch-0.07.tar.gz'
[MSG] [Mon Jul 17 20:50:05 2006] Trying to get 'http://www.cpan.org/authors/id/M/MI/MIYAGAWA/CHECKSUMS'
[MSG] [Mon Jul 17 20:50:10 2006] Checksum matches for 'Class-DBI-AbstractSearch-0.07.tar.gz'
[MSG] [Mon Jul 17 20:50:11 2006] Extracted 'Class-DBI-AbstractSearch-0.07/'
[MSG] [Mon Jul 17 20:50:11 2006] Extracted 'Class-DBI-AbstractSearch-0.07/t/'
[MSG] [Mon Jul 17 20:50:11 2006] Extracted 'Class-DBI-AbstractSearch-0.07/t/00_compile.t'
[MSG] [Mon Jul 17 20:50:11 2006] Extracted 'Class-DBI-AbstractSearch-0.07/t/01_abstract.t'
[MSG] [Mon Jul 17 20:50:11 2006] Extracted 'Class-DBI-AbstractSearch-0.07/MANIFEST'
[MSG] [Mon Jul 17 20:50:12 2006] Extracted 'Class-DBI-AbstractSearch-0.07/lib/'
[MSG] [Mon Jul 17 20:50:12 2006] Extracted 'Class-DBI-AbstractSearch-0.07/lib/Class/'
[MSG] [Mon Jul 17 20:50:12 2006] Extracted 'Class-DBI-AbstractSearch-0.07/lib/Class/DBI/'
[MSG] [Mon Jul 17 20:50:12 2006] Extracted 'Class-DBI-AbstractSearch-0.07/lib/Class/DBI/AbstractSearch.pm'
[MSG] [Mon Jul 17 20:50:12 2006] Extracted 'Class-DBI-AbstractSearch-0.07/Changes'
[MSG] [Mon Jul 17 20:50:12 2006] Extracted 'Class-DBI-AbstractSearch-0.07/Makefile.PL'
[MSG] [Mon Jul 17 20:50:12 2006] Extracted 'Class-DBI-AbstractSearch-0.07/META.yml'
[MSG] [Mon Jul 17 20:50:13 2006] Extracted 'Class::DBI::AbstractSearch' to '/opt/perl/testers/.cpanplus/5.8.8/build/Class-DBI-AbstractSearch-0.07'
[MSG] [Mon Jul 17 20:50:13 2006] Checking if your kit is complete...
Looks good
Warning: prerequisite SQL::Abstract::Limit 0.1 not found.
Writing Makefile for Class::DBI::AbstractSearch
[MSG] [Mon Jul 17 20:50:13 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Jul 17 20:50:14 2006] Module 'Class::DBI::AbstractSearch' requires 'Class::DBI' version '0.9' to be installed
[MSG] [Mon Jul 17 20:50:14 2006] Module 'Class::DBI::AbstractSearch' requires 'SQL::Abstract::Limit' version '0.1' to be installed
[MSG] [Mon Jul 17 20:50:14 2006] Writing Makefile for Class::DBI
[MSG] [Mon Jul 17 20:50:15 2006] Module 'Class::DBI' requires 'Class::Accessor' version '0.18' to be installed
[MSG] [Mon Jul 17 20:50:15 2006] Module 'Class::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:50:15 2006] Module 'Class::DBI' requires 'Class::Trigger' version '0.07' to be installed
[MSG] [Mon Jul 17 20:50:15 2006] Module 'Class::DBI' requires 'Clone' version '0' to be installed
[MSG] [Mon Jul 17 20:50:15 2006] Module 'Class::DBI' requires 'Ima::DBI' version '0.33' to be installed
[MSG] [Mon Jul 17 20:50:15 2006] Module 'Class::DBI' requires 'UNIVERSAL::moniker' version '0.06' to be installed
[MSG] [Mon Jul 17 20:50:15 2006] Module 'Class::DBI' requires 'version' version '0' to be installed
[MSG] [Mon Jul 17 20:50:16 2006] Writing Makefile for Class::Accessor
[MSG] [Mon Jul 17 20:50:16 2006] Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor.3
[MSG] [Mon Jul 17 20:50:17 2006] MAKE TEST passed: t/accessors....ok
t/croak........ok
t/getset.......ok
All tests successful.
Files=3, Tests=31, 0 wallclock secs ( 0.11 cusr + 0.06 csys = 0.17 CPU)
[MSG] [Mon Jul 17 20:50:17 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:18 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:50:18 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:50:19 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 1 wallclock secs ( 0.19 cusr + 0.08 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:50:19 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:19 2006] Writing Makefile for Class::Trigger
[MSG] [Mon Jul 17 20:50:20 2006] Module 'Class::Trigger' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:50:20 2006] Module 'Class::Trigger' requires 'IO::Scalar' version '0' to be installed
[MSG] [Mon Jul 17 20:50:20 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:50:21 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:50:21 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.21 cusr + 0.06 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:50:22 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:22 2006] Writing Makefile for IO::Stringy
[MSG] [Mon Jul 17 20:50:23 2006] Manifying blib/man3/IO::Lines.3
Manifying blib/man3/IO::ScalarArray.3
Manifying blib/man3/IO::Stringy.3
Manifying blib/man3/IO::Wrap.3
Manifying blib/man3/IO::AtomicFile.3
Manifying blib/man3/IO::Scalar.3
Manifying blib/man3/IO::InnerFile.3
Manifying blib/man3/IO::WrapTie.3
[MSG] [Mon Jul 17 20:50:24 2006] MAKE TEST passed: t/IO_Lines..........ok
t/IO_Scalar.........ok
t/IO_ScalarArray....ok
t/IO_WrapTie........ok
t/simple............ok
t/two...............ok
All tests successful.
Files=6, Tests=116, 1 wallclock secs ( 0.31 cusr + 0.09 csys = 0.40 CPU)
[MSG] [Mon Jul 17 20:50:24 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:24 2006] Manifying blib/man3/Class::Trigger.3
[MSG] [Mon Jul 17 20:50:25 2006] MAKE TEST passed: t/00_compile.....ok
t/01_trigger.....ok
t/02_valid.......ok
t/03_inherit.....ok
t/04_object......ok
t/05_args........ok
t/06_coverage....ok
All tests successful.
Files=7, Tests=27, 0 wallclock secs ( 0.30 cusr + 0.11 csys = 0.41 CPU)
[MSG] [Mon Jul 17 20:50:25 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:26 2006] Writing Makefile for Clone
[MSG] [Mon Jul 17 20:50:26 2006] Running Mkbootstrap for Clone ()
Manifying blib/man3/Clone.3
[MSG] [Mon Jul 17 20:50:27 2006] MAKE TEST passed: t/01array.....ok
t/02hash......ok
t/03scalar....ok
t/04tie.......ok
t/05dtype.....ok
t/06refcnt....ok
t/07magic.....ok
1/2 skipped: Taint::Runtime not installed
t/dclone......ok
All tests successful, 1 subtest skipped.
Files=8, Tests=56, 0 wallclock secs ( 0.23 cusr + 0.13 csys = 0.36 CPU)
[MSG] [Mon Jul 17 20:50:27 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:28 2006] Writing Makefile for Ima::DBI
[MSG] [Mon Jul 17 20:50:28 2006] Module 'Ima::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:50:28 2006] Module 'Ima::DBI' requires 'DBI' version '1.2' to be installed
[MSG] [Mon Jul 17 20:50:28 2006] Module 'Ima::DBI' requires 'DBIx::ContextualFetch' version '1' to be installed
[MSG] [Mon Jul 17 20:50:29 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:50:29 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:50:30 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.21 cusr + 0.05 csys = 0.26 CPU)
[MSG] [Mon Jul 17 20:50:30 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:41 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:50:47 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:50:57 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 10 wallclock secs ( 7.89 cusr + 1.18 csys = 9.07 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU)
Testing handle creation speed...
21276 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:50:57 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:50:58 2006] Writing Makefile for DBIx::ContextualFetch
[MSG] [Mon Jul 17 20:50:58 2006] Module 'DBIx::ContextualFetch' requires 'DBI' version '1.35' to be installed
[MSG] [Mon Jul 17 20:51:09 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:51:15 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:51:25 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 9 wallclock secs ( 7.87 cusr + 1.16 csys = 9.03 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.00 usr + 0.00 sys = 0.00 CPU)
Testing handle creation speed...
20833 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:51:25 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:51:26 2006] Manifying blib/man3/DBIx::ContextualFetch.3
[MSG] [Mon Jul 17 20:51:26 2006] MAKE TEST passed: t/01..............skipped
all skipped: needs DBD::SQLite for testing
t/pod-coverage....ok
t/pod.............ok
All tests successful, 1 test skipped.
Files=3, Tests=2, 0 wallclock secs ( 0.19 cusr + 0.08 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:51:26 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:51:27 2006] Manifying blib/man3/Ima::DBI.3
[MSG] [Mon Jul 17 20:51:28 2006] MAKE TEST passed: t/DBI.............ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=29, 1 wallclock secs ( 0.30 cusr + 0.06 csys = 0.36 CPU)
[MSG] [Mon Jul 17 20:51:28 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:51:28 2006] Hello!
We no longer depend on Lingua::EN::Inflect.
If you care about plurals, you should install it.
Writing Makefile for UNIVERSAL::moniker
[MSG] [Mon Jul 17 20:51:29 2006] Manifying blib/man3/UNIVERSAL::moniker.3
[MSG] [Mon Jul 17 20:51:29 2006] MAKE TEST passed: t/moniker....ok
All tests successful.
Files=1, Tests=4, 0 wallclock secs ( 0.05 cusr + 0.00 csys = 0.05 CPU)
[MSG] [Mon Jul 17 20:51:29 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:51:30 2006] # running Build.PL
/opt/perl/testers/bin/perl Build.PL
Deleting _build
Creating custom builder _build/lib/version/Builder.pm in _build/lib/version
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
gcc -I/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE -fPIC -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -o /tmp/compilet.o /tmp/compilet.c
gcc -shared -L/usr/local/lib -o /tmp/compilet.so /tmp/compilet.o
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Deleting Build
Removed previous script 'Build'
Creating new 'Build' script for 'version' version '0.64'
Unknown 'build_class', defaulting to 'Module::Build'
[MSG] [Mon Jul 17 20:51:31 2006]
[MSG] [Mon Jul 17 20:51:33 2006] MAKE TEST passed: t/01base.......ok
t/02derived....ok
t/03require....ok
4/126 skipped: version require'd instead of use'd, cannot test qv
All tests successful, 4 subtests skipped.
Files=3, Tests=388, 1 wallclock secs ( 0.29 cusr + 0.05 csys = 0.34 CPU)
[MSG] [Mon Jul 17 20:51:33 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:51:33 2006] Manifying blib/man3/Class::DBI.3
Manifying blib/man3/Class::DBI::Test::SQLite.3
Manifying blib/man3/Class::DBI::Attribute.3
Manifying blib/man3/Class::DBI::Cascade::None.3
Manifying blib/man3/Class::DBI::Search::Basic.3
Manifying blib/man3/Class::DBI::ColumnGrouper.3
Manifying blib/man3/Class::DBI::Cascade::Delete.3
Manifying blib/man3/Class::DBI::SQL::Transformer.3
Manifying blib/man3/Class::DBI::Relationship.3
Manifying blib/man3/Class::DBI::Cascade::Fail.3
Manifying blib/man3/Class::DBI::Column.3
Manifying blib/man3/Class::DBI::Query.3
Manifying blib/man3/Class::DBI::Iterator.3
[MSG] [Mon Jul 17 20:51:35 2006] MAKE TEST passed: t/01-columns.............ok
t/02-Film................skipped
all skipped: needs DBD::SQLite for testing
t/03-subclassing.........skipped
all skipped: needs DBD::SQLite for testing
t/04-lazy................skipped
all skipped: needs DBD::SQLite for testing
t/05-Query...............skipped
all skipped: needs DBD::SQLite for testing
t/06-hasa................skipped
all skipped: needs DBD::SQLite for testing
t/08-inheritcols.........ok
t/09-has_many............skipped
all skipped: needs DBD::SQLite for testing
t/10-mysql...............skipped
all skipped: Need Date::Simple for this test
t/11-triggers............skipped
all skipped: needs DBD::SQLite for testing
t/12-filter..............skipped
all skipped: needs DBD::SQLite for testing
t/13-constraint..........skipped
all skipped: needs DBD::SQLite for testing
t/14-might_have..........skipped
all skipped: needs DBD::SQLite for testing
t/15-accessor............skipped
all skipped: needs DBD::SQLite for testing
t/16-reserved............skipped
all skipped: needs DBD::SQLite for testing
t/17-data_type...........skipped
all skipped: needs DBD::Pg for testing
t/18-has_a...............skipped
all skipped: needs DBD::SQLite for testing
t/19-set_sql.............skipped
all skipped: needs DBD::SQLite for testing
t/21-iterator............skipped
all skipped: needs DBD::SQLite for testing
t/22-deflate_order.......skipped
all skipped: Need Time::Piece::MySQL for this test
t/23-cascade.............skipped
all skipped: needs DBD::SQLite for testing
t/24-meta_info...........ok
t/25-closures_in_meta....skipped
all skipped: Need MySQL for this test
t/26-mutator.............skipped
all skipped: needs DBD::SQLite for testing
t/97-pod.................ok
t/98-failure.............skipped
all skipped: needs DBD::SQLite for testing
t/99-misc................skipped
all skipped: needs DBD::SQLite for testing
All tests successful, 23 tests skipped.
Files=27, Tests=48, 1 wallclock secs ( 1.26 cusr + 0.46 csys = 1.72 CPU)
[MSG] [Mon Jul 17 20:51:36 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:51:36 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAVEBAIRD/SQL-Abstract-Limit-0.12.tar.gz'
[MSG] [Mon Jul 17 20:51:37 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAVEBAIRD/CHECKSUMS'
[MSG] [Mon Jul 17 20:51:41 2006] Checksum matches for 'SQL-Abstract-Limit-0.12.tar.gz'
[MSG] [Mon Jul 17 20:51:41 2006] Extracted 'SQL-Abstract-Limit-0.12/'
[MSG] [Mon Jul 17 20:51:41 2006] Extracted 'SQL-Abstract-Limit-0.12/Build.PL'
[MSG] [Mon Jul 17 20:51:41 2006] Extracted 'SQL-Abstract-Limit-0.12/Changes'
[MSG] [Mon Jul 17 20:51:42 2006] Extracted 'SQL-Abstract-Limit-0.12/lib/'
[MSG] [Mon Jul 17 20:51:42 2006] Extracted 'SQL-Abstract-Limit-0.12/lib/SQL/'
[MSG] [Mon Jul 17 20:51:42 2006] Extracted 'SQL-Abstract-Limit-0.12/lib/SQL/Abstract/'
[MSG] [Mon Jul 17 20:51:42 2006] Extracted 'SQL-Abstract-Limit-0.12/lib/SQL/Abstract/Limit.pm'
[MSG] [Mon Jul 17 20:51:42 2006] Extracted 'SQL-Abstract-Limit-0.12/Makefile.PL'
[MSG] [Mon Jul 17 20:51:42 2006] Extracted 'SQL-Abstract-Limit-0.12/MANIFEST'
[MSG] [Mon Jul 17 20:51:42 2006] Extracted 'SQL-Abstract-Limit-0.12/META.yml'
[MSG] [Mon Jul 17 20:51:43 2006] Extracted 'SQL-Abstract-Limit-0.12/README'
[MSG] [Mon Jul 17 20:51:43 2006] Extracted 'SQL-Abstract-Limit-0.12/t/'
[MSG] [Mon Jul 17 20:51:43 2006] Extracted 'SQL-Abstract-Limit-0.12/t/00.load.t'
[MSG] [Mon Jul 17 20:51:43 2006] Extracted 'SQL-Abstract-Limit-0.12/t/01.sql.t'
[MSG] [Mon Jul 17 20:51:43 2006] Extracted 'SQL-Abstract-Limit-0.12/t/02.syntax.t'
[MSG] [Mon Jul 17 20:51:43 2006] Extracted 'SQL-Abstract-Limit-0.12/t/03.subclass.t'
[MSG] [Mon Jul 17 20:51:43 2006] Extracted 'SQL-Abstract-Limit-0.12/t/04.args.t'
[MSG] [Mon Jul 17 20:51:44 2006] Extracted 'SQL-Abstract-Limit-0.12/t/pod-coverage.t'
[MSG] [Mon Jul 17 20:51:44 2006] Extracted 'SQL-Abstract-Limit-0.12/t/pod.t'
[MSG] [Mon Jul 17 20:51:44 2006] Extracted 'SQL-Abstract-Limit-0.12/t/test_data.csv'
[MSG] [Mon Jul 17 20:51:44 2006] Extracted 'SQL::Abstract::Limit' to '/opt/perl/testers/.cpanplus/5.8.8/build/SQL-Abstract-Limit-0.12'
[MSG] [Mon Jul 17 20:51:45 2006] Checking if your kit is complete...
Looks good
Warning: prerequisite SQL::Abstract 1.2 not found.
Writing Makefile for SQL::Abstract::Limit
[MSG] [Mon Jul 17 20:51:45 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Jul 17 20:51:45 2006] Module 'SQL::Abstract::Limit' requires 'DBI' version '0' to be installed
[MSG] [Mon Jul 17 20:51:45 2006] Module 'SQL::Abstract::Limit' requires 'SQL::Abstract' version '1.2' to be installed
[MSG] [Mon Jul 17 20:51:45 2006] Module 'SQL::Abstract::Limit' requires 'Test::Exception' version '0' to be installed
[MSG] [Mon Jul 17 20:51:56 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:52:02 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:52:12 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 10 wallclock secs ( 7.87 cusr + 1.17 csys = 9.04 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.02 usr + 0.00 sys = 0.02 CPU)
Testing handle creation speed...
21276 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:52:13 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:13 2006] Trying to get 'http://www.cpan.org/authors/id/N/NW/NWIGER/SQL-Abstract-1.21.tar.gz'
[MSG] [Mon Jul 17 20:52:15 2006] Trying to get 'http://www.cpan.org/authors/id/N/NW/NWIGER/CHECKSUMS'
[MSG] [Mon Jul 17 20:52:16 2006] Checksum matches for 'SQL-Abstract-1.21.tar.gz'
[MSG] [Mon Jul 17 20:52:17 2006] Extracted 'SQL-Abstract-1.21/'
[MSG] [Mon Jul 17 20:52:17 2006] Extracted 'SQL-Abstract-1.21/lib/'
[MSG] [Mon Jul 17 20:52:17 2006] Extracted 'SQL-Abstract-1.21/lib/SQL/'
[MSG] [Mon Jul 17 20:52:17 2006] Extracted 'SQL-Abstract-1.21/lib/SQL/Abstract.pm'
[MSG] [Mon Jul 17 20:52:17 2006] Extracted 'SQL-Abstract-1.21/Makefile.PL'
[MSG] [Mon Jul 17 20:52:17 2006] Extracted 'SQL-Abstract-1.21/README'
[MSG] [Mon Jul 17 20:52:18 2006] Extracted 'SQL-Abstract-1.21/Changes'
[MSG] [Mon Jul 17 20:52:18 2006] Extracted 'SQL-Abstract-1.21/t/'
[MSG] [Mon Jul 17 20:52:18 2006] Extracted 'SQL-Abstract-1.21/t/00new.t'
[MSG] [Mon Jul 17 20:52:18 2006] Extracted 'SQL-Abstract-1.21/t/01generate.t'
[MSG] [Mon Jul 17 20:52:18 2006] Extracted 'SQL-Abstract-1.21/t/02where.t'
[MSG] [Mon Jul 17 20:52:18 2006] Extracted 'SQL-Abstract-1.21/t/03values.t'
[MSG] [Mon Jul 17 20:52:18 2006] Extracted 'SQL-Abstract-1.21/MANIFEST'
[MSG] [Mon Jul 17 20:52:19 2006] Extracted 'SQL::Abstract' to '/opt/perl/testers/.cpanplus/5.8.8/build/SQL-Abstract-1.21'
[MSG] [Mon Jul 17 20:52:19 2006] Checking if your kit is complete...
Looks good
Writing Makefile for SQL::Abstract
[MSG] [Mon Jul 17 20:52:19 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Jul 17 20:52:21 2006] cp lib/SQL/Abstract.pm blib/lib/SQL/Abstract.pm
Manifying blib/man3/SQL::Abstract.3
[MSG] [Mon Jul 17 20:52:21 2006] MAKE TEST passed: t/00new.........ok
t/01generate....ok
t/02where.......ok
t/03values......ok
All tests successful.
Files=4, Tests=103, 0 wallclock secs ( 0.14 cusr + 0.03 csys = 0.17 CPU)
[MSG] [Mon Jul 17 20:52:22 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:22 2006] Writing Makefile for Test::Exception
[MSG] [Mon Jul 17 20:52:22 2006] Module 'Test::Exception' requires 'Sub::Uplevel' version '0.06' to be installed
[MSG] [Mon Jul 17 20:52:23 2006] Writing Makefile for Sub::Uplevel
[MSG] [Mon Jul 17 20:52:23 2006] Manifying blib/man3/Sub::Uplevel.3
[MSG] [Mon Jul 17 20:52:24 2006] MAKE TEST passed: t/01_die_check..........ok
t/02_uplevel............ok
t/03_nested_uplevels....ok
t/98_pod................skipped
all skipped: Skipping author tests
t/99_pod_coverage.......skipped
all skipped: Skipping author tests
All tests successful, 2 tests skipped.
Files=5, Tests=125, 0 wallclock secs ( 0.21 cusr + 0.07 csys = 0.28 CPU)
[MSG] [Mon Jul 17 20:52:24 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:25 2006] Manifying blib/man3/Test::Exception.3
[MSG] [Mon Jul 17 20:52:26 2006] MAKE TEST passed: t/caller........ok
t/documented....ok
t/Exception.....ok
t/lives_and.....ok
t/pod...........ok
t/preserve......ok
t/return........ok
t/stacktrace....ok
All tests successful.
Files=8, Tests=51, 1 wallclock secs ( 0.44 cusr + 0.18 csys = 0.62 CPU)
[MSG] [Mon Jul 17 20:52:26 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:27 2006] cp lib/SQL/Abstract/Limit.pm blib/lib/SQL/Abstract/Limit.pm
Manifying blib/man3/SQL::Abstract::Limit.3
[MSG] [Mon Jul 17 20:52:29 2006] MAKE TEST passed: t/00.load.........# Testing SQL::Abstract::Limit 0.12
ok
t/01.sql.......... *** not yet testing subquery LIMIT emulations
ok
t/02.syntax.......ok
7/7 skipped: need DBD::AnyData and Class::DBI to test syntax auto-detection
t/03.subclass.....ok
t/04.args.........ok
t/pod-coverage....ok
t/pod.............ok
All tests successful, 7 subtests skipped.
Files=7, Tests=38, 1 wallclock secs ( 0.55 cusr + 0.12 csys = 0.67 CPU)
[MSG] [Mon Jul 17 20:52:29 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:30 2006] cp lib/Class/DBI/AbstractSearch.pm blib/lib/Class/DBI/AbstractSearch.pm
Manifying blib/man3/Class::DBI::AbstractSearch.3
[MSG] [Mon Jul 17 20:52:31 2006] MAKE TEST passed: t/00_compile.....ok
t/01_abstract....skipped
all skipped: needs DND::SQLite for testing
All tests successful, 1 test skipped.
Files=2, Tests=1, 0 wallclock secs ( 0.08 cusr + 0.03 csys = 0.11 CPU)
[MSG] [Mon Jul 17 20:52:31 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:31 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAVEBAIRD/Class-DBI-FormBuilder-0.481.tar.gz'
[MSG] [Mon Jul 17 20:52:33 2006] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAVEBAIRD/CHECKSUMS'
[MSG] [Mon Jul 17 20:52:37 2006] Checksum matches for 'Class-DBI-FormBuilder-0.481.tar.gz'
[MSG] [Mon Jul 17 20:52:37 2006] Extracted 'Class-DBI-FormBuilder-0.481/'
[MSG] [Mon Jul 17 20:52:37 2006] Extracted 'Class-DBI-FormBuilder-0.481/Build.PL'
[MSG] [Mon Jul 17 20:52:37 2006] Extracted 'Class-DBI-FormBuilder-0.481/Changes'
[MSG] [Mon Jul 17 20:52:37 2006] Extracted 'Class-DBI-FormBuilder-0.481/DBI/'
[MSG] [Mon Jul 17 20:52:38 2006] Extracted 'Class-DBI-FormBuilder-0.481/DBI/Test.pm'
[MSG] [Mon Jul 17 20:52:38 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/'
[MSG] [Mon Jul 17 20:52:38 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/Class/'
[MSG] [Mon Jul 17 20:52:38 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/Class/DBI/'
[MSG] [Mon Jul 17 20:52:38 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/Class/DBI/FormBuilder/'
[MSG] [Mon Jul 17 20:52:38 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/Class/DBI/FormBuilder/Meta/'
[MSG] [Mon Jul 17 20:52:38 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/Class/DBI/FormBuilder/Meta/Column.pm'
[MSG] [Mon Jul 17 20:52:39 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/Class/DBI/FormBuilder/Meta/Table.pm'
[MSG] [Mon Jul 17 20:52:39 2006] Extracted 'Class-DBI-FormBuilder-0.481/lib/Class/DBI/FormBuilder.pm'
[MSG] [Mon Jul 17 20:52:39 2006] Extracted 'Class-DBI-FormBuilder-0.481/Makefile.PL'
[MSG] [Mon Jul 17 20:52:39 2006] Extracted 'Class-DBI-FormBuilder-0.481/MANIFEST'
[MSG] [Mon Jul 17 20:52:39 2006] Extracted 'Class-DBI-FormBuilder-0.481/META.yml'
[MSG] [Mon Jul 17 20:52:39 2006] Extracted 'Class-DBI-FormBuilder-0.481/README'
[MSG] [Mon Jul 17 20:52:39 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/'
[MSG] [Mon Jul 17 20:52:40 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/00-load.t'
[MSG] [Mon Jul 17 20:52:40 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/001.setup.t'
[MSG] [Mon Jul 17 20:52:40 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/0012.pk.t'
[MSG] [Mon Jul 17 20:52:40 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/01.create.t'
[MSG] [Mon Jul 17 20:52:40 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/011.create.t'
[MSG] [Mon Jul 17 20:52:40 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/02.update.t'
[MSG] [Mon Jul 17 20:52:41 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/03.retrieve.t'
[MSG] [Mon Jul 17 20:52:41 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/04.retrieve.t'
[MSG] [Mon Jul 17 20:52:41 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/05.update_or_create.t'
[MSG] [Mon Jul 17 20:52:41 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/06.update_or_create.t'
[MSG] [Mon Jul 17 20:52:41 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/07.retrieve_or_create.t'
[MSG] [Mon Jul 17 20:52:41 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/08.retrieve_or_create.t'
[MSG] [Mon Jul 17 20:52:41 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/09.retrieve_or_create.t'
[MSG] [Mon Jul 17 20:52:42 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/10.find_or_create.t'
[MSG] [Mon Jul 17 20:52:42 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/11.find_or_create.t'
[MSG] [Mon Jul 17 20:52:42 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/12.search.t'
[MSG] [Mon Jul 17 20:52:42 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/13.search.t'
[MSG] [Mon Jul 17 20:52:42 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/14.search_like.t'
[MSG] [Mon Jul 17 20:52:42 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/15.search_where.t'
[MSG] [Mon Jul 17 20:52:42 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/16.search_form.t'
[MSG] [Mon Jul 17 20:52:43 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/30.has_a.t'
[MSG] [Mon Jul 17 20:52:43 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/31.has_many.t'
[MSG] [Mon Jul 17 20:52:43 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/32.has_many.t'
[MSG] [Mon Jul 17 20:52:43 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/33.has_many.t'
[MSG] [Mon Jul 17 20:52:43 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/34.might_have.t'
[MSG] [Mon Jul 17 20:52:43 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/40.auto_untaint.t'
[MSG] [Mon Jul 17 20:52:43 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/41.auto_untaint.t'
[MSG] [Mon Jul 17 20:52:44 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/42.auto_untaint.t'
[MSG] [Mon Jul 17 20:52:44 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/51.related.t'
[MSG] [Mon Jul 17 20:52:44 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/60.alias.t'
[MSG] [Mon Jul 17 20:52:44 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/61.alias.t'
[MSG] [Mon Jul 17 20:52:44 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/99.cleanup.t'
[MSG] [Mon Jul 17 20:52:44 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/pod-coverage.t'
[MSG] [Mon Jul 17 20:52:45 2006] Extracted 'Class-DBI-FormBuilder-0.481/t/pod.t'
[MSG] [Mon Jul 17 20:52:45 2006] Extracted 'Class::DBI::FormBuilder' to '/opt/perl/testers/.cpanplus/5.8.8/build/Class-DBI-FormBuilder-0.481'
[MSG] [Mon Jul 17 20:52:45 2006] Checking if your kit is complete...
Looks good
Warning: prerequisite UNIVERSAL::require 0 not found.
Writing Makefile for Class::DBI::FormBuilder
[MSG] [Mon Jul 17 20:52:46 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Jul 17 20:52:46 2006] Module 'Class::DBI::FormBuilder' requires 'CGI::FormBuilder' version '3' to be installed
[MSG] [Mon Jul 17 20:52:46 2006] Module 'Class::DBI::FormBuilder' requires 'Class::DBI' version '0' to be installed
[MSG] [Mon Jul 17 20:52:46 2006] Module 'Class::DBI::FormBuilder' requires 'Class::DBI::AbstractSearch' version '0' to be installed
[MSG] [Mon Jul 17 20:52:46 2006] Module 'Class::DBI::FormBuilder' requires 'Class::Data::Inheritable' version '0' to be installed
[MSG] [Mon Jul 17 20:52:46 2006] Module 'Class::DBI::FormBuilder' requires 'Test::Exception' version '0' to be installed
[MSG] [Mon Jul 17 20:52:47 2006] Module 'Class::DBI::FormBuilder' requires 'UNIVERSAL::require' version '0' to be installed
[MSG] [Mon Jul 17 20:52:49 2006]
Doing FormBuilder pre-req checks...
Warning: The following *OPTIONAL* modules are NOT installed:
HTML::Template 2.06 (Can't locate HTML/Template.pm in @INC)
Text::Template 1.43 (Can't locate Text/Template.pm in @INC)
Template 2.08 (Can't locate Template.pm in @INC)
CGI::FastTemplate 1.09 (Can't locate CGI/FastTemplate.pm in @INC)
FormBuilder will still work just fine, a-ok, no problem... unless you
want to use one of these modules for templates. You can always install
them later, FormBuilder will run without them.
Writing Makefile for CGI::FormBuilder
[MSG] [Mon Jul 17 20:52:50 2006] Manifying blib/man3/CGI::FormBuilder::Field::file.3
Manifying blib/man3/CGI::FormBuilder::Template::TT2.3
Manifying blib/man3/CGI::FormBuilder::Test.3
Manifying blib/man3/CGI::FormBuilder::Messages::es.3
Manifying blib/man3/CGI::FormBuilder::Messages::en.3
Manifying blib/man3/CGI::FormBuilder::Messages::da.3
Manifying blib/man3/CGI::FormBuilder::Messages::default.3
Manifying blib/man3/CGI::FormBuilder::Source.3
Manifying blib/man3/CGI::FormBuilder::Template::Fast.3
Manifying blib/man3/CGI::FormBuilder::Messages::C.3
Manifying blib/man3/CGI::FormBuilder::Messages::de.3
Manifying blib/man3/CGI::FormBuilder::Field::text.3
Manifying blib/man3/CGI::FormBuilder::Field::checkbox.3
Manifying blib/man3/CGI::FormBuilder.3
Manifying blib/man3/CGI::FormBuilder::Messages::_example.3
Manifying blib/man3/CGI::FormBuilder::Messages::da_DK.3
Manifying blib/man3/CGI::FormBuilder::Messages::ja.3
Manifying blib/man3/CGI::FormBuilder::Template.3
Manifying blib/man3/CGI::FormBuilder::Field::static.3
Manifying blib/man3/CGI::FormBuilder::Messages::no_NO.3
Manifying blib/man3/CGI::FormBuilder::Util.3
Manifying blib/man3/CGI::FormBuilder::Messages::fr_FR.3
Manifying blib/man3/CGI::FormBuilder::Messages::es_ES.3
Manifying blib/man3/CGI::FormBuilder::Template::Text.3
Manifying blib/man3/CGI::FormBuilder::Field::hidden.3
Manifying blib/man3/CGI::FormBuilder::Template::HTML.3
Manifying blib/man3/CGI::FormBuilder::Source::File.3
Manifying blib/man3/CGI::FormBuilder::Field::button.3
Manifying blib/man3/CGI::FormBuilder::Multi.3
Manifying blib/man3/CGI::FormBuilder::Messages::en_US.3
Manifying blib/man3/CGI::FormBuilder::Messages::de_DE.3
Manifying blib/man3/CGI::FormBuilder::Field::password.3
Manifying blib/man3/CGI::FormBuilder::Messages::ja_JP.3
Manifying blib/man3/CGI::FormBuilder::Field.3
Manifying blib/man3/CGI::FormBuilder::Messages.3
Manifying blib/man3/CGI::FormBuilder::Messages::no.3
Manifying blib/man3/CGI::FormBuilder::Messages::fr.3
Manifying blib/man3/CGI::FormBuilder::Field::image.3
Manifying blib/man3/CGI::FormBuilder::Field::radio.3
Manifying blib/man3/CGI::FormBuilder::Field::textarea.3
Manifying blib/man3/CGI::FormBuilder::Field::select.3
[MSG] [Mon Jul 17 20:52:52 2006] MAKE TEST passed: t/1a-generate.........ok
t/1b-fields...........ok
t/1c-validate.........ok
t/1d-messages.........ok
t/2a-template-html....ok
4/4 skipped: skip: HTML::Template not installed here
t/2b-template-text....ok
4/4 skipped: skip: Text::Template not installed here
t/2c-template-tt2.....ok
4/4 skipped: skip: Template Toolkit not installed here
t/2d-template-fast....ok
4/4 skipped: skip: CGI::FastTemplate not installed here
t/3a-source-file......ok
t/3b-multi-page.......ok
7/42 skipped: skip: CGI::Session not installed here
All tests successful, 23 subtests skipped.
Files=10, Tests=456, 1 wallclock secs ( 1.13 cusr + 0.22 csys = 1.35 CPU)
[MSG] [Mon Jul 17 20:52:52 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:53 2006] Writing Makefile for Class::DBI
[MSG] [Mon Jul 17 20:52:53 2006] Module 'Class::DBI' requires 'Class::Accessor' version '0.18' to be installed
[MSG] [Mon Jul 17 20:52:53 2006] Module 'Class::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:52:53 2006] Module 'Class::DBI' requires 'Class::Trigger' version '0.07' to be installed
[MSG] [Mon Jul 17 20:52:54 2006] Module 'Class::DBI' requires 'Clone' version '0' to be installed
[MSG] [Mon Jul 17 20:52:54 2006] Module 'Class::DBI' requires 'Ima::DBI' version '0.33' to be installed
[MSG] [Mon Jul 17 20:52:54 2006] Module 'Class::DBI' requires 'UNIVERSAL::moniker' version '0.06' to be installed
[MSG] [Mon Jul 17 20:52:54 2006] Module 'Class::DBI' requires 'version' version '0' to be installed
[MSG] [Mon Jul 17 20:52:54 2006] Writing Makefile for Class::Accessor
[MSG] [Mon Jul 17 20:52:55 2006] Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor.3
[MSG] [Mon Jul 17 20:52:56 2006] MAKE TEST passed: t/accessors....ok
t/croak........ok
t/getset.......ok
All tests successful.
Files=3, Tests=31, 1 wallclock secs ( 0.12 cusr + 0.05 csys = 0.17 CPU)
[MSG] [Mon Jul 17 20:52:56 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:56 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:52:57 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:52:57 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.23 cusr + 0.05 csys = 0.28 CPU)
[MSG] [Mon Jul 17 20:52:58 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:52:58 2006] Writing Makefile for Class::Trigger
[MSG] [Mon Jul 17 20:52:58 2006] Module 'Class::Trigger' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:52:59 2006] Module 'Class::Trigger' requires 'IO::Scalar' version '0' to be installed
[MSG] [Mon Jul 17 20:52:59 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:53:00 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:53:00 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.16 cusr + 0.11 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:53:00 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:53:01 2006] Writing Makefile for IO::Stringy
[MSG] [Mon Jul 17 20:53:02 2006] Manifying blib/man3/IO::Lines.3
Manifying blib/man3/IO::ScalarArray.3
Manifying blib/man3/IO::Stringy.3
Manifying blib/man3/IO::Wrap.3
Manifying blib/man3/IO::AtomicFile.3
Manifying blib/man3/IO::Scalar.3
Manifying blib/man3/IO::InnerFile.3
Manifying blib/man3/IO::WrapTie.3
[MSG] [Mon Jul 17 20:53:02 2006] MAKE TEST passed: t/IO_Lines..........ok
t/IO_Scalar.........ok
t/IO_ScalarArray....ok
t/IO_WrapTie........ok
t/simple............ok
t/two...............ok
All tests successful.
Files=6, Tests=116, 0 wallclock secs ( 0.24 cusr + 0.16 csys = 0.40 CPU)
[MSG] [Mon Jul 17 20:53:03 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:53:03 2006] Manifying blib/man3/Class::Trigger.3
[MSG] [Mon Jul 17 20:53:04 2006] MAKE TEST passed: t/00_compile.....ok
t/01_trigger.....ok
t/02_valid.......ok
t/03_inherit.....ok
t/04_object......ok
t/05_args........ok
t/06_coverage....ok
All tests successful.
Files=7, Tests=27, 0 wallclock secs ( 0.31 cusr + 0.09 csys = 0.40 CPU)
[MSG] [Mon Jul 17 20:53:04 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:53:05 2006] Writing Makefile for Clone
[MSG] [Mon Jul 17 20:53:06 2006] Running Mkbootstrap for Clone ()
Manifying blib/man3/Clone.3
[MSG] [Mon Jul 17 20:53:06 2006] MAKE TEST passed: t/01array.....ok
t/02hash......ok
t/03scalar....ok
t/04tie.......ok
t/05dtype.....ok
t/06refcnt....ok
t/07magic.....ok
1/2 skipped: Taint::Runtime not installed
t/dclone......ok
All tests successful, 1 subtest skipped.
Files=8, Tests=56, 0 wallclock secs ( 0.30 cusr + 0.09 csys = 0.39 CPU)
[MSG] [Mon Jul 17 20:53:07 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:53:07 2006] Writing Makefile for Ima::DBI
[MSG] [Mon Jul 17 20:53:07 2006] Module 'Ima::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:53:08 2006] Module 'Ima::DBI' requires 'DBI' version '1.2' to be installed
[MSG] [Mon Jul 17 20:53:08 2006] Module 'Ima::DBI' requires 'DBIx::ContextualFetch' version '1' to be installed
[MSG] [Mon Jul 17 20:53:08 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:53:09 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:53:09 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.19 cusr + 0.07 csys = 0.26 CPU)
[MSG] [Mon Jul 17 20:53:10 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:53:20 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:53:26 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:53:37 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 9 wallclock secs ( 7.78 cusr + 1.43 csys = 9.21 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.02 usr + 0.00 sys = 0.02 CPU)
Testing handle creation speed...
20833 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:53:37 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:53:38 2006] Writing Makefile for DBIx::ContextualFetch
[MSG] [Mon Jul 17 20:53:38 2006] Module 'DBIx::ContextualFetch' requires 'DBI' version '1.35' to be installed
[MSG] [Mon Jul 17 20:53:49 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:53:55 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:54:05 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 9 wallclock secs ( 7.89 cusr + 1.23 csys = 9.12 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.00 usr + 0.00 sys = 0.00 CPU)
Testing handle creation speed...
21276 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:54:05 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:06 2006] Manifying blib/man3/DBIx::ContextualFetch.3
[MSG] [Mon Jul 17 20:54:07 2006] MAKE TEST passed: t/01..............skipped
all skipped: needs DBD::SQLite for testing
t/pod-coverage....ok
t/pod.............ok
All tests successful, 1 test skipped.
Files=3, Tests=2, 1 wallclock secs ( 0.24 cusr + 0.03 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:54:07 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:07 2006] Manifying blib/man3/Ima::DBI.3
[MSG] [Mon Jul 17 20:54:08 2006] MAKE TEST passed: t/DBI.............ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=29, 0 wallclock secs ( 0.26 cusr + 0.09 csys = 0.35 CPU)
[MSG] [Mon Jul 17 20:54:08 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:09 2006] Hello!
We no longer depend on Lingua::EN::Inflect.
If you care about plurals, you should install it.
Writing Makefile for UNIVERSAL::moniker
[MSG] [Mon Jul 17 20:54:09 2006] Manifying blib/man3/UNIVERSAL::moniker.3
[MSG] [Mon Jul 17 20:54:10 2006] MAKE TEST passed: t/moniker....ok
All tests successful.
Files=1, Tests=4, 0 wallclock secs ( 0.06 cusr + 0.01 csys = 0.07 CPU)
[MSG] [Mon Jul 17 20:54:10 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:11 2006] # running Build.PL
/opt/perl/testers/bin/perl Build.PL
Deleting _build
Creating custom builder _build/lib/version/Builder.pm in _build/lib/version
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
gcc -I/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE -fPIC -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -o /tmp/compilet.o /tmp/compilet.c
gcc -shared -L/usr/local/lib -o /tmp/compilet.so /tmp/compilet.o
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Deleting Build
Removed previous script 'Build'
Creating new 'Build' script for 'version' version '0.64'
Unknown 'build_class', defaulting to 'Module::Build'
[MSG] [Mon Jul 17 20:54:12 2006]
[MSG] [Mon Jul 17 20:54:13 2006] MAKE TEST passed: t/01base.......ok
t/02derived....ok
t/03require....ok
4/126 skipped: version require'd instead of use'd, cannot test qv
All tests successful, 4 subtests skipped.
Files=3, Tests=388, 0 wallclock secs ( 0.24 cusr + 0.11 csys = 0.35 CPU)
[MSG] [Mon Jul 17 20:54:13 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:14 2006] Manifying blib/man3/Class::DBI.3
Manifying blib/man3/Class::DBI::Test::SQLite.3
Manifying blib/man3/Class::DBI::Attribute.3
Manifying blib/man3/Class::DBI::Cascade::None.3
Manifying blib/man3/Class::DBI::Search::Basic.3
Manifying blib/man3/Class::DBI::ColumnGrouper.3
Manifying blib/man3/Class::DBI::Cascade::Delete.3
Manifying blib/man3/Class::DBI::SQL::Transformer.3
Manifying blib/man3/Class::DBI::Relationship.3
Manifying blib/man3/Class::DBI::Cascade::Fail.3
Manifying blib/man3/Class::DBI::Column.3
Manifying blib/man3/Class::DBI::Query.3
Manifying blib/man3/Class::DBI::Iterator.3
[MSG] [Mon Jul 17 20:54:16 2006] MAKE TEST passed: t/01-columns.............ok
t/02-Film................skipped
all skipped: needs DBD::SQLite for testing
t/03-subclassing.........skipped
all skipped: needs DBD::SQLite for testing
t/04-lazy................skipped
all skipped: needs DBD::SQLite for testing
t/05-Query...............skipped
all skipped: needs DBD::SQLite for testing
t/06-hasa................skipped
all skipped: needs DBD::SQLite for testing
t/08-inheritcols.........ok
t/09-has_many............skipped
all skipped: needs DBD::SQLite for testing
t/10-mysql...............skipped
all skipped: Need Date::Simple for this test
t/11-triggers............skipped
all skipped: needs DBD::SQLite for testing
t/12-filter..............skipped
all skipped: needs DBD::SQLite for testing
t/13-constraint..........skipped
all skipped: needs DBD::SQLite for testing
t/14-might_have..........skipped
all skipped: needs DBD::SQLite for testing
t/15-accessor............skipped
all skipped: needs DBD::SQLite for testing
t/16-reserved............skipped
all skipped: needs DBD::SQLite for testing
t/17-data_type...........skipped
all skipped: needs DBD::Pg for testing
t/18-has_a...............skipped
all skipped: needs DBD::SQLite for testing
t/19-set_sql.............skipped
all skipped: needs DBD::SQLite for testing
t/21-iterator............skipped
all skipped: needs DBD::SQLite for testing
t/22-deflate_order.......skipped
all skipped: Need Time::Piece::MySQL for this test
t/23-cascade.............skipped
all skipped: needs DBD::SQLite for testing
t/24-meta_info...........ok
t/25-closures_in_meta....skipped
all skipped: Need MySQL for this test
t/26-mutator.............skipped
all skipped: needs DBD::SQLite for testing
t/97-pod.................ok
t/98-failure.............skipped
all skipped: needs DBD::SQLite for testing
t/99-misc................skipped
all skipped: needs DBD::SQLite for testing
All tests successful, 23 tests skipped.
Files=27, Tests=48, 2 wallclock secs ( 1.30 cusr + 0.45 csys = 1.75 CPU)
[MSG] [Mon Jul 17 20:54:16 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:17 2006] Writing Makefile for Class::DBI::AbstractSearch
[MSG] [Mon Jul 17 20:54:17 2006] Module 'Class::DBI::AbstractSearch' requires 'Class::DBI' version '0.9' to be installed
[MSG] [Mon Jul 17 20:54:18 2006] Module 'Class::DBI::AbstractSearch' requires 'SQL::Abstract::Limit' version '0.1' to be installed
[MSG] [Mon Jul 17 20:54:18 2006] Writing Makefile for Class::DBI
[MSG] [Mon Jul 17 20:54:19 2006] Module 'Class::DBI' requires 'Class::Accessor' version '0.18' to be installed
[MSG] [Mon Jul 17 20:54:19 2006] Module 'Class::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:54:19 2006] Module 'Class::DBI' requires 'Class::Trigger' version '0.07' to be installed
[MSG] [Mon Jul 17 20:54:19 2006] Module 'Class::DBI' requires 'Clone' version '0' to be installed
[MSG] [Mon Jul 17 20:54:19 2006] Module 'Class::DBI' requires 'Ima::DBI' version '0.33' to be installed
[MSG] [Mon Jul 17 20:54:19 2006] Module 'Class::DBI' requires 'UNIVERSAL::moniker' version '0.06' to be installed
[MSG] [Mon Jul 17 20:54:19 2006] Module 'Class::DBI' requires 'version' version '0' to be installed
[MSG] [Mon Jul 17 20:54:20 2006] Writing Makefile for Class::Accessor
[MSG] [Mon Jul 17 20:54:20 2006] Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor.3
[MSG] [Mon Jul 17 20:54:21 2006] MAKE TEST passed: t/accessors....ok
t/croak........ok
t/getset.......ok
All tests successful.
Files=3, Tests=31, 0 wallclock secs ( 0.11 cusr + 0.07 csys = 0.18 CPU)
[MSG] [Mon Jul 17 20:54:21 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:22 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:54:22 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:54:23 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.15 cusr + 0.11 csys = 0.26 CPU)
[MSG] [Mon Jul 17 20:54:23 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:24 2006] Writing Makefile for Class::Trigger
[MSG] [Mon Jul 17 20:54:24 2006] Module 'Class::Trigger' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:54:24 2006] Module 'Class::Trigger' requires 'IO::Scalar' version '0' to be installed
[MSG] [Mon Jul 17 20:54:25 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:54:25 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:54:26 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.22 cusr + 0.05 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:54:26 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:27 2006] Writing Makefile for IO::Stringy
[MSG] [Mon Jul 17 20:54:27 2006] Manifying blib/man3/IO::Lines.3
Manifying blib/man3/IO::ScalarArray.3
Manifying blib/man3/IO::Stringy.3
Manifying blib/man3/IO::Wrap.3
Manifying blib/man3/IO::AtomicFile.3
Manifying blib/man3/IO::Scalar.3
Manifying blib/man3/IO::InnerFile.3
Manifying blib/man3/IO::WrapTie.3
[MSG] [Mon Jul 17 20:54:28 2006] MAKE TEST passed: t/IO_Lines..........ok
t/IO_Scalar.........ok
t/IO_ScalarArray....ok
t/IO_WrapTie........ok
t/simple............ok
t/two...............ok
All tests successful.
Files=6, Tests=116, 0 wallclock secs ( 0.33 cusr + 0.09 csys = 0.42 CPU)
[MSG] [Mon Jul 17 20:54:28 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:29 2006] Manifying blib/man3/Class::Trigger.3
[MSG] [Mon Jul 17 20:54:30 2006] MAKE TEST passed: t/00_compile.....ok
t/01_trigger.....ok
t/02_valid.......ok
t/03_inherit.....ok
t/04_object......ok
t/05_args........ok
t/06_coverage....ok
All tests successful.
Files=7, Tests=27, 1 wallclock secs ( 0.29 cusr + 0.10 csys = 0.39 CPU)
[MSG] [Mon Jul 17 20:54:30 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:31 2006] Writing Makefile for Clone
[MSG] [Mon Jul 17 20:54:31 2006] Running Mkbootstrap for Clone ()
Manifying blib/man3/Clone.3
[MSG] [Mon Jul 17 20:54:32 2006] MAKE TEST passed: t/01array.....ok
t/02hash......ok
t/03scalar....ok
t/04tie.......ok
t/05dtype.....ok
t/06refcnt....ok
t/07magic.....ok
1/2 skipped: Taint::Runtime not installed
t/dclone......ok
All tests successful, 1 subtest skipped.
Files=8, Tests=56, 0 wallclock secs ( 0.26 cusr + 0.09 csys = 0.35 CPU)
[MSG] [Mon Jul 17 20:54:32 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:33 2006] Writing Makefile for Ima::DBI
[MSG] [Mon Jul 17 20:54:33 2006] Module 'Ima::DBI' requires 'Class::Data::Inheritable' version '0.02' to be installed
[MSG] [Mon Jul 17 20:54:33 2006] Module 'Ima::DBI' requires 'DBI' version '1.2' to be installed
[MSG] [Mon Jul 17 20:54:34 2006] Module 'Ima::DBI' requires 'DBIx::ContextualFetch' version '1' to be installed
[MSG] [Mon Jul 17 20:54:34 2006] Writing Makefile for Class::Data::Inheritable
[MSG] [Mon Jul 17 20:54:35 2006] Manifying blib/man3/Class::Data::Inheritable.3
[MSG] [Mon Jul 17 20:54:35 2006] MAKE TEST passed: t/Inheritable.....ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=17, 0 wallclock secs ( 0.21 cusr + 0.07 csys = 0.28 CPU)
[MSG] [Mon Jul 17 20:54:36 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:54:46 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:54:53 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:55:03 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 9 wallclock secs ( 7.87 cusr + 1.33 csys = 9.20 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU)
Testing handle creation speed...
20833 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:55:03 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:55:04 2006] Writing Makefile for DBIx::ContextualFetch
[MSG] [Mon Jul 17 20:55:04 2006] Module 'DBIx::ContextualFetch' requires 'DBI' version '1.35' to be installed
[MSG] [Mon Jul 17 20:55:15 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43profenv.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Mon Jul 17 20:55:21 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Mon Jul 17 20:55:32 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43profenv..............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43profenv.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2339, 10 wallclock secs ( 7.84 cusr + 1.34 csys = 9.18 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.51 by Tim Bunce, 1.51
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU)
Testing handle creation speed...
21276 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Mon Jul 17 20:55:32 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:55:32 2006] Manifying blib/man3/DBIx::ContextualFetch.3
[MSG] [Mon Jul 17 20:55:33 2006] MAKE TEST passed: t/01..............skipped
all skipped: needs DBD::SQLite for testing
t/pod-coverage....ok
t/pod.............ok
All tests successful, 1 test skipped.
Files=3, Tests=2, 0 wallclock secs ( 0.20 cusr + 0.07 csys = 0.27 CPU)
[MSG] [Mon Jul 17 20:55:33 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:55:33 2006] Manifying blib/man3/Ima::DBI.3
[MSG] [Mon Jul 17 20:55:34 2006] MAKE TEST passed: t/DBI.............ok
t/pod-coverage....ok
t/pod.............ok
All tests successful.
Files=3, Tests=29, 0 wallclock secs ( 0.33 cusr + 0.05 csys = 0.38 CPU)
[MSG] [Mon Jul 17 20:55:35 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:55:35 2006] Hello!
We no longer depend on Lingua::EN::Inflect.
If you care about plurals, you should install it.
Writing Makefile for UNIVERSAL::moniker
[MSG] [Mon Jul 17 20:55:36 2006] Manifying blib/man3/UNIVERSAL::moniker.3
[MSG] [Mon Jul 17 20:55:36 2006] MAKE TEST passed: t/moniker....ok
All tests successful.
Files=1, Tests=4, 0 wallclock secs ( 0.06 cusr + 0.01 csys = 0.07 CPU)
[MSG] [Mon Jul 17 20:55:36 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:55:37 2006] # running Build.PL
/opt/perl/testers/bin/perl Build.PL
Deleting _build
Creating custom builder _build/lib/version/Builder.pm in _build/lib/version
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
gcc -I/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE -fPIC -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -o /tmp/compilet.o /tmp/compilet.c
gcc -shared -L/usr/local/lib -o /tmp/compilet.so /tmp/compilet.o
Checking whether your kit is complete...
Looks good
Checking prerequisites...
Looks good
Deleting Build
Removed previous script 'Build'
Creating new 'Build' script for 'version' version '0.64'
Unknown 'build_class', defaulting to 'Module::Build'
[MSG] [Mon Jul 17 20:55:38 2006]
[MSG] [Mon Jul 17 20:55:40 2006] MAKE TEST passed: t/01base.......ok
t/02derived....ok
t/03require....ok
4/126 skipped: version require'd instead of use'd, cannot test qv
All tests successful, 4 subtests skipped.
Files=3, Tests=388, 1 wallclock secs ( 0.25 cusr + 0.09 csys = 0.34 CPU)
[MSG] [Mon Jul 17 20:55:40 2006] Ok, not sending test report
[MSG] [Mon Jul 17 20:55:41 2006] Manifying blib/man3/Class::DBI.3
Manifying blib/man3/Class::DBI::Test::SQLite.3
Manifying blib/man3/Class::DBI::Attribute.3
Manifying blib/man3/Class::DBI::Cascade::None.3
Manifying blib/man3/Class::DBI::Search::Basic.3
Manifying blib/man3/Class::DBI::ColumnGrouper.3
Manifying blib/man3/Class::DBI::Cascade::Delete.3
Manifying blib/man3/Class::DBI::SQL::Transformer.3
Manifying blib/man3/Class::DBI::Relationship.3
Manifying blib/man3/Class::DBI::Cascade::Fail.3
Manifying blib/man3/Class::DBI::Column.3
Manifying bli