FAIL ModPerl-ParamBuilder-0.08 darwin-2level 8.1.0

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear Frank Wiles,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.055. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[MSG] [Fri Jan 13 08:51:02 2006] Trying to get 'ftp://mirrors.kernel.org/pub/CPAN/authors/id/F/FW/FWILES/ModPerl-ParamBuilder-0.08.tar.gz'
[MSG] [Fri Jan 13 08:51:04 2006] Trying to get 'ftp://mirrors.kernel.org/pub/CPAN/authors/id/F/FW/FWILES/CHECKSUMS'
[MSG] [Fri Jan 13 08:51:05 2006] Checksum matches for 'ModPerl-ParamBuilder-0.08.tar.gz'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/examples/'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/examples/Example.pm'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/examples/Test/'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/examples/Test/Params.pm'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/examples/README.txt'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/examples/Test.pm'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/META.yml'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/Changes'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/t/'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/t/pod-coverage.t'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/t/00-load.t'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/t/pod.t'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/.cvsignore'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/MANIFEST'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/MANIFEST.SKIP'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/lib/'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/lib/ModPerl/'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/lib/ModPerl/ParamBuilder.pm'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/README'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl-ParamBuilder-0.08/Build.PL'
[MSG] [Fri Jan 13 08:51:06 2006] Extracted 'ModPerl::ParamBuilder' to '/Users/david/.cpanplus/5.8.7/build/ModPerl-ParamBuilder-0.08'
[ERROR] [Fri Jan 13 08:51:12 2006] Could not run 'Build test': Failed 1/3 test scripts, 66.67% okay. 1/3 subtests failed, 66.67% okay.


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Apache2::CmdParms              2.000002
	Apache2::Module                2.000002
	Apache2::ServerUtil            2.000002

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

--

Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
  Platform:
    osname=darwin, osvers=8.1.0, archname=darwin-2level
    uname='darwin geertz.local 8.1.0 darwin kernel version 8.1.0: tue may 10 18:16:08 pdt 2005; root:xnu-792.1.5.obj~4release_ppc power macintosh powerpc '
    config_args='-des -Dperladmin=david@kineticode.com -Dcf_email=david@kineticode.com'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe',
    optimize='-O3',
    cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe'
    ccversion='', gccversion='4.0.0 20041026 (Apple Computer, Inc. build 4061)', gccosandvers='darwin8'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'

• FAIL ModPerl-ParamBuilder-0.08 darwin-2level 8.1.0 by david