Front page | perl.cpan.testers |
Postings from December 2005
FAIL Mail-CheckUser-1.21 i386-linux-thread-multi 2.6.9-22.18.bz155725.elsmp
Thread Next
From:
njh
Date:
December 13, 2005 11:54
Subject:
FAIL Mail-CheckUser-1.21 i386-linux-thread-multi 2.6.9-22.18.bz155725.elsmp
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Ilya Martynov,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[CP_MSG] [Tue Dec 13 19:53:48 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/I/IL/ILYAM/Mail-CheckUser-1.21.tar.gz'
[CP_MSG] [Tue Dec 13 19:53:50 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/I/IL/ILYAM/CHECKSUMS'
[CP_MSG] [Tue Dec 13 19:53:51 2005] Checksum matches for 'Mail-CheckUser-1.21.tar.gz'
[CP_MSG] [Tue Dec 13 19:53:51 2005] Extracted 'Mail-CheckUser-1.21/'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/README'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/CheckUser.pm'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/MANIFEST'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/timeout.t'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/smtp.t'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/wildcard.t'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/syntax.t'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/smtp-taint.t'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/check.pl'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/t/dns.t'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/Changes'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/Makefile.PL'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/TODO'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/procmail/'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/procmail/cufilter'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail-CheckUser-1.21/procmail/.procmailrc'
[CP_MSG] [Tue Dec 13 19:53:52 2005] Extracted 'Mail::CheckUser' to '/root/.cpanplus/5.8.6/build/Mail-CheckUser-1.21'
[CP_MSG] [Tue Dec 13 19:53:53 2005] Checking if your kit is complete...
Looks good
Writing Makefile for Mail::CheckUser
[CP_MSG] [Tue Dec 13 19:53:55 2005] cp CheckUser.pm blib/lib/Mail/CheckUser.pm
cp procmail/cufilter blib/script/cufilter
/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/cufilter
Manifying blib/man1/cufilter.1
Manifying blib/man3/Mail::CheckUser.3pm
[CP_ERROR] [Tue Dec 13 19:54:07 2005] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/dns...........ok
t/smtp-taint....FAILED before any test output arrived
t/smtp..........ok
t/syntax........ok
t/timeout.......ok
t/wildcard......# Failed test 6 in t/check.pl at line 20 fail #6
# t/check.pl line 20 is: ok($ok);
# Failed test 8 in t/check.pl at line 20 fail #8
# Failed test 11 in t/check.pl at line 20 fail #11
# Failed test 12 in t/check.pl at line 20 fail #12
FAILED tests 6, 8, 11-12
Failed 4/13 tests, 69.23% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/smtp-taint.t ?? ?? % ??
t/wildcard.t 13 4 30.77% 6 8 11-12
Failed 2/6 test scripts, 66.67% okay. 4/59 subtests failed, 93.22% okay.
make: *** [test_dynamic] Error 255
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
IO::Handle 1.24
Net::DNS 0.54
Net::Ping 2.31
Net::SMTP 2.29
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
--
Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
Platform:
osname=linux, osvers=2.6.9-22.18.bz155725.elsmp, archname=i386-linux-thread-multi
uname='linux hs20-bc1-7.build.redhat.com 2.6.9-22.18.bz155725.elsmp #1 smp thu nov 17 15:34:08 est 2005 i686 i686 i386 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -Dversion=5.8.6 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_endprotoent_r_proto -Ud_endservent_r_proto -Ud_sethostent_r_proto -Ud_setprotoent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.5 5.8.4 5.8.3'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='4.0.2 20051125 (Red Hat 4.0.2-8)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.5'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Next