develooper Front page | perl.cpan.testers | Postings from November 2005

FAIL Audio-Cuefile-Parser-0.01 i386-linux-thread-multi 2.6.3-25mdk-i686-up-4gb

From:
saper
Date:
November 23, 2005 14:48
Subject:
FAIL Audio-Cuefile-Parser-0.01 i386-linux-thread-multi 2.6.3-25mdk-i686-up-4gb
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear Matt Koscica,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.059_01. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Nov 23 23:48:23 2005] Trying to get 'file://usr/local/cpan/authors/id/M/MA/MATTK/Audio-Cuefile-Parser-0.01.tar.gz'
[MSG] [Wed Nov 23 23:48:24 2005] Trying to get 'file://usr/local/cpan/authors/id/M/MA/MATTK/CHECKSUMS'
[MSG] [Wed Nov 23 23:48:24 2005] Checksum matches for 'Audio-Cuefile-Parser-0.01.tar.gz'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/.cvsignore'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/Changes'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/lib/'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/lib/Audio/'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/lib/Audio/Cuefile/'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/lib/Audio/Cuefile/Parser.pm'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/Makefile.PL'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/MANIFEST'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/README'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/t/'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/t/00-load.t'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/t/01-parse.t'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/t/pod-coverage.t'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio-Cuefile-Parser/t/pod.t'
[MSG] [Wed Nov 23 23:48:24 2005] Extracted 'Audio::Cuefile::Parser' to '/home/cpanplus/.cpanplus/5.8.5/build/Audio-Cuefile-Parser'
[MSG] [Wed Nov 23 23:48:25 2005] Checking if your kit is complete...
Warning: the following files are missing in your kit:
	META.yml
Please inform the author.
WARNING: Setting ABSTRACT via file 'lib/Audio/Cuefile/Parser.pm' failed
 at /usr/lib/perl5/5.8.5/ExtUtils/MakeMaker.pm line 615
Writing Makefile for Audio::Cuefile::Parser

[MSG] [Wed Nov 23 23:48:25 2005] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Nov 23 23:48:26 2005] cp lib/Audio/Cuefile/Parser.pm blib/lib/Audio/Cuefile/Parser.pm
Manifying blib/man3/Audio::Cuefile::Parser.3pm

[ERROR] [Wed Nov 23 23:48:28 2005] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl5.8.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.........# Testing Audio::Cuefile::Parser 0.01, Perl 5.008005, /usr/bin/perl5.8.5
ok
t/01-parse........ok
t/pod-coverage....
#   Failed test 'Pod coverage on Audio::Cuefile::Parser'
#   in /usr/lib/perl5/site_perl/5.8.5/Test/Pod/Coverage.pm at line 112.
# Coverage for Audio::Cuefile::Parser is 57.1%, with 3 naked subroutines:
# 	cuedata
# 	cuefile
# 	new
# Looks like you failed 1 test of 1.
dubious
	Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
	Failed 1/1 tests, 0.00% okay
t/pod.............ok
Failed Test      Stat Wstat Total Fail  Failed  List of Failed
---------------------------------------------------------------------------------------------------
t/pod-coverage.t    1   256     1    1 100.00%  1
Failed 1/4 test scripts, 75.00% okay. 1/4 subtests failed, 75.00% okay.
make: *** [test_dynamic] Erreur 255


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Test::More                         0.62

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

--

Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
  Platform:
    osname=linux, osvers=2.6.3-25mdk-i686-up-4gb, archname=i386-linux-thread-multi
    uname='linux mercury.mandriva.com 2.6.3-25mdk-i686-up-4gb #1 fri jan 14 03:39:39 mst 2005 i686 intel(r) pentium(r) 4 cpu 3.00ghz unknown gnulinux '
    config_args='-des -Dinc_version_list=5.8.4/i386-linux-thread-multi 5.8.4 5.8.3/i386-linux-thread-multi 5.8.3 5.8.2/i386-linux-thread-multi 5.8.2 5.8.1/i386-linux-thread-multi 5.8.1 5.8.0/i386-linux-thread-multi 5.8.0 5.6.1 5.6.0 -Darchname=i386-linux -Dcc=gcc -Doptimize=-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro  -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr -Dman3ext=3pm -Dcf_by=Mandrakesoft -Dmyhostname=localhost -Dperladmin=root@localhost -Dd_dosuid -Ud_csh -Duseshrplib -Accflags=-DPERL_DISABLE_PMC -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro ',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lndbm -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.3'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About