Front page | perl.cpan.testers |
Postings from October 2005
FAIL Module-Crypt-0.04 i386-linux-thread-multi 2.4.21-27.0.2.elsmp
Thread Next
From:
njh
Date:
October 22, 2005 02:58
Subject:
FAIL Module-Crypt-0.04 i386-linux-thread-multi 2.4.21-27.0.2.elsmp
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear AAR,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[CP_MSG] [Sat Oct 22 08:42:38 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/A/AA/AAR/Module-Crypt-0.04.tar.gz'
[CP_MSG] [Sat Oct 22 08:42:39 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/A/AA/AAR/CHECKSUMS'
[CP_MSG] [Sat Oct 22 08:42:39 2005] Checksum matches for 'Module-Crypt-0.04.tar.gz'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/Changelog'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/Crypt.pm'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/Crypt.xs'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/Makefile.PL'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/MANIFEST'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/META.yml'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/README'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/t/'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module-Crypt-0.04/t/01-basic.t'
[CP_MSG] [Sat Oct 22 08:42:40 2005] Extracted 'Module::Crypt' to '/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04'
[CP_MSG] [Sat Oct 22 08:42:41 2005] Checking if your kit is complete...
Looks good
Warning: prerequisite ExtUtils::CBuilder 0 not found.
Warning: prerequisite ExtUtils::ParseXS 0 not found.
Writing Makefile for Module::Crypt
[CP_MSG] [Sat Oct 22 08:42:41 2005] Module 'Module::Crypt' requires 'ExtUtils::CBuilder' version '0' to be installed
[CP_MSG] [Sat Oct 22 08:42:41 2005] Module 'Module::Crypt' requires 'ExtUtils::ParseXS' version '0' to be installed
[CP_MSG] [Sat Oct 22 08:42:41 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/K/KW/KWILLIAMS/ExtUtils-CBuilder-0.15.tar.gz'
[CP_MSG] [Sat Oct 22 08:42:41 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/K/KW/KWILLIAMS/CHECKSUMS'
[CP_MSG] [Sat Oct 22 08:42:42 2005] Checksum matches for 'ExtUtils-CBuilder-0.15.tar.gz'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/Build.PL'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/Changes'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/INSTALL'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Base.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/aix.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/cygwin.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/darwin.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/os2.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/Unix.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/VMS.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder/Platform/Windows.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/lib/ExtUtils/CBuilder.pm'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/Makefile.PL'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/MANIFEST'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/META.yml'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/SIGNATURE'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/t/'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/t/01-basic.t'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils-CBuilder-0.15/t/02-link.t'
[CP_MSG] [Sat Oct 22 08:42:45 2005] Extracted 'ExtUtils::CBuilder' to '/home/njh/.cpanplus/5.8.6/build/ExtUtils-CBuilder-0.15'
[CP_MSG] [Sat Oct 22 08:42:46 2005] Checking if your kit is complete...
Looks good
Writing Makefile for ExtUtils::CBuilder
[CP_MSG] [Sat Oct 22 08:42:47 2005] cp lib/ExtUtils/CBuilder.pm blib/lib/ExtUtils/CBuilder.pm
cp lib/ExtUtils/CBuilder/Platform/Windows.pm blib/lib/ExtUtils/CBuilder/Platform/Windows.pm
cp lib/ExtUtils/CBuilder/Platform/aix.pm blib/lib/ExtUtils/CBuilder/Platform/aix.pm
cp lib/ExtUtils/CBuilder/Platform/cygwin.pm blib/lib/ExtUtils/CBuilder/Platform/cygwin.pm
cp lib/ExtUtils/CBuilder/Platform/VMS.pm blib/lib/ExtUtils/CBuilder/Platform/VMS.pm
cp lib/ExtUtils/CBuilder/Platform/Unix.pm blib/lib/ExtUtils/CBuilder/Platform/Unix.pm
cp lib/ExtUtils/CBuilder/Platform/darwin.pm blib/lib/ExtUtils/CBuilder/Platform/darwin.pm
cp lib/ExtUtils/CBuilder/Platform/os2.pm blib/lib/ExtUtils/CBuilder/Platform/os2.pm
cp lib/ExtUtils/CBuilder/Base.pm blib/lib/ExtUtils/CBuilder/Base.pm
Manifying blib/man3/ExtUtils::CBuilder::Platform::Windows.3pm
Manifying blib/man3/ExtUtils::CBuilder.3pm
[CP_MSG] [Sat Oct 22 08:42:49 2005] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-basic....ok
t/02-link.....ok
All tests successful.
Files=2, Tests=16, 1 wallclock secs ( 0.58 cusr + 0.07 csys = 0.65 CPU)
[CP_MSG] [Sat Oct 22 08:42:49 2005] Successfully sent 'pass' report for 'ExtUtils-CBuilder-0.15'
[CP_MSG] [Sat Oct 22 08:42:50 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/K/KW/KWILLIAMS/ExtUtils-ParseXS-2.15.tar.gz'
[CP_MSG] [Sat Oct 22 08:42:50 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/K/KW/KWILLIAMS/CHECKSUMS'
[CP_MSG] [Sat Oct 22 08:42:50 2005] Checksum matches for 'ExtUtils-ParseXS-2.15.tar.gz'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/Build.PL'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/Changes'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/INSTALL'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/lib/'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/lib/ExtUtils/'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/lib/ExtUtils/ParseXS.pm'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/lib/ExtUtils/xsubpp'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/Makefile.PL'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/MANIFEST'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/META.yml'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/README'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/t/'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/t/basic.t'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/t/XSTest.pm'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils-ParseXS-2.15/t/XSTest.xs'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Extracted 'ExtUtils::ParseXS' to '/home/njh/.cpanplus/5.8.6/build/ExtUtils-ParseXS-2.15'
[CP_MSG] [Sat Oct 22 08:42:51 2005] Checking if your kit is complete...
Looks good
Writing Makefile for ExtUtils::ParseXS
[CP_ERROR] [Sat Oct 22 08:42:51 2005] No such module 'Config' found on CPAN
[CP_MSG] [Sat Oct 22 08:42:51 2005] Module 'ExtUtils::ParseXS' requires 'ExtUtils::CBuilder' version '0' to be installed
[CP_MSG] [Sat Oct 22 08:42:55 2005] cp lib/ExtUtils/ParseXS.pm blib/lib/ExtUtils/ParseXS.pm
cp lib/ExtUtils/xsubpp blib/lib/ExtUtils/xsubpp
Manifying blib/man3/ExtUtils::ParseXS.3pm
[CP_MSG] [Sat Oct 22 08:42:57 2005] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/basic....ok
All tests successful.
Files=1, Tests=10, 1 wallclock secs ( 0.85 cusr + 0.15 csys = 1.00 CPU)
[CP_MSG] [Sat Oct 22 08:42:58 2005] Successfully sent 'pass' report for 'ExtUtils-ParseXS-2.15'
[CP_MSG] [Sat Oct 22 08:43:00 2005] cp Crypt.pm blib/lib/Module/Crypt.pm
/usr/bin/perl /usr/lib/perl5/5.8.6/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.8.6/ExtUtils/typemap Crypt.xs > Crypt.xsc && mv Crypt.xsc Crypt.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -DVERSION=\"0.04\" -DXS_VERSION=\"0.04\" -fPIC "-I/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE" Crypt.c
Running Mkbootstrap for Module::Crypt ()
chmod 644 Crypt.bs
rm -f blib/arch/auto/Module/Crypt/Crypt.so
gcc -shared -L/usr/local/lib Crypt.o -o blib/arch/auto/Module/Crypt/Crypt.so
chmod 755 blib/arch/auto/Module/Crypt/Crypt.so
cp Crypt.bs blib/arch/auto/Module/Crypt/Crypt.bs
chmod 644 blib/arch/auto/Module/Crypt/Crypt.bs
Manifying blib/man3/Module::Crypt.3pm
[CP_ERROR] [Sat Oct 22 08:43:12 2005] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-basic..../home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:1: error: stray ‘\’ in program
/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:1: error: syntax error before numeric constant
/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:1: error: missing terminating " character
In file included from /usr/include/asm/param.h:4,
from /usr/include/linux/param.h:4,
from /usr/include/sys/param.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:446,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/unistd.h:313: error: syntax error before ‘size_t’
/usr/include/unistd.h:319: error: syntax error before ‘size_t’
/usr/include/unistd.h:341: error: syntax error before ‘size_t’
/usr/include/unistd.h:344: error: syntax error before ‘size_t’
/usr/include/unistd.h:357: error: syntax error before ‘size_t’
/usr/include/unistd.h:361: error: syntax error before ‘size_t’
/usr/include/unistd.h:449: error: syntax error before ‘size_t’
In file included from /usr/include/asm/param.h:4,
from /usr/include/linux/param.h:4,
from /usr/include/sys/param.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:446,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/unistd.h:546: error: syntax error before ‘confstr’
/usr/include/unistd.h:546: error: syntax error before ‘size_t’
/usr/include/unistd.h:718: error: syntax error before ‘size_t’
/usr/include/unistd.h:746: error: syntax error before ‘size_t’
/usr/include/unistd.h:775: error: syntax error before ‘size_t’
In file included from /usr/include/asm/param.h:4,
from /usr/include/linux/param.h:4,
from /usr/include/sys/param.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:446,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/unistd.h:797: error: syntax error before ‘size_t’
/usr/include/unistd.h:804: error: syntax error before ‘size_t’
/usr/include/unistd.h:815: error: syntax error before ‘size_t’
/usr/include/unistd.h:817: error: syntax error before ‘size_t’
/usr/include/unistd.h:835: error: syntax error before ‘size_t’
In file included from /usr/include/unistd.h:1052,
from /usr/include/asm/param.h:4,
from /usr/include/linux/param.h:4,
from /usr/include/sys/param.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:446,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/unistd.h:25: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h:29: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h: In function ‘read’:
/usr/include/bits/unistd.h:31: error: ‘__buf’ undeclared (first use in this function)
/usr/include/bits/unistd.h:31: error: (Each undeclared identifier is reported only once
/usr/include/bits/unistd.h:31: error: for each function it appears in.)
/usr/include/bits/unistd.h:31: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/unistd.h:31: error: ‘__nbytes’ undeclared (first use in this function)
/usr/include/bits/unistd.h:33: error: ‘__fd’ undeclared (first use in this function)
/usr/include/bits/unistd.h: At top level:
/usr/include/bits/unistd.h:37: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h:40: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h:54: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h: In function ‘pread’:
/usr/include/bits/unistd.h:56: error: ‘__buf’ undeclared (first use in this function)
/usr/include/bits/unistd.h:56: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/unistd.h:56: error: ‘__nbytes’ undeclared (first use in this function)
/usr/include/bits/unistd.h:58: error: ‘__fd’ undeclared (first use in this function)
/usr/include/bits/unistd.h:58: error: ‘__offset’ undeclared (first use in this function)
/usr/include/bits/unistd.h: At top level:
/usr/include/bits/unistd.h:64: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h: In function ‘pread64’:
/usr/include/bits/unistd.h:66: error: ‘__buf’ undeclared (first use in this function)
/usr/include/bits/unistd.h:66: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/unistd.h:66: error: ‘__nbytes’ undeclared (first use in this function)
/usr/include/bits/unistd.h:68: error: ‘__fd’ undeclared (first use in this function)
/usr/include/bits/unistd.h:68: error: ‘__offset’ undeclared (first use in this function)
/usr/include/bits/unistd.h: At top level:
/usr/include/bits/unistd.h:74: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h:80: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h: In function ‘readlink’:
/usr/include/bits/unistd.h:83: error: ‘__buf’ undeclared (first use in this function)
/usr/include/bits/unistd.h:83: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/unistd.h:83: error: ‘__len’ undeclared (first use in this function)
/usr/include/bits/unistd.h:85: error: ‘__path’ undeclared (first use in this function)
/usr/include/bits/unistd.h: At top level:
/usr/include/bits/unistd.h:89: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h:93: error: syntax error before ‘size_t’
/usr/include/bits/unistd.h: In function ‘getcwd’:
/usr/include/bits/unistd.h:95: error: ‘__buf’ undeclared (first use in this function)
/usr/include/bits/unistd.h:95: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/unistd.h:95: error: ‘__size’ undeclared (first use in this function)
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:451,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/stdlib.h: At top level:
/usr/include/stdlib.h:140: error: syntax error before ‘__ctype_get_mb_cur_max’
/usr/include/stdlib.h:453: error: syntax error before ‘size_t’
/usr/include/stdlib.h:483: error: syntax error before ‘size_t’
/usr/include/stdlib.h:587: error: syntax error before ‘__size’
/usr/include/stdlib.h:589: error: syntax error before ‘__nmemb’
/usr/include/stdlib.h:598: error: syntax error before ‘size_t’
In file included from /usr/include/stdlib.h:610,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:451,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/alloca.h:33: error: syntax error before ‘__size’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:451,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/stdlib.h:615: error: syntax error before ‘__size’
/usr/include/stdlib.h:620: error: syntax error before ‘size_t’
/usr/include/stdlib.h:774: error: syntax error before ‘size_t’
/usr/include/stdlib.h:779: error: syntax error before ‘size_t’
/usr/include/stdlib.h:852: error: syntax error before ‘size_t’
/usr/include/stdlib.h:855: error: syntax error before ‘size_t’
/usr/include/stdlib.h:859: error: syntax error before ‘size_t’
/usr/include/stdlib.h:863: error: syntax error before ‘size_t’
/usr/include/stdlib.h:872: error: syntax error before ‘size_t’
/usr/include/stdlib.h:876: error: syntax error before ‘size_t’
/usr/include/stdlib.h:883: error: syntax error before ‘mbstowcs’
/usr/include/stdlib.h:884: error: syntax error before ‘size_t’
/usr/include/stdlib.h:886: error: syntax error before ‘wcstombs’
/usr/include/stdlib.h:887: error: syntax error before ‘size_t’
/usr/include/stdlib.h:949: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:488,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/string.h:39: error: syntax error before ‘size_t’
/usr/include/string.h:43: error: syntax error before ‘size_t’
/usr/include/string.h:52: error: syntax error before ‘size_t’
/usr/include/string.h:59: error: syntax error before ‘size_t’
/usr/include/string.h:62: error: syntax error before ‘size_t’
/usr/include/string.h:66: error: syntax error before ‘size_t’
/usr/include/string.h:77: error: syntax error before ‘size_t’
/usr/include/string.h:88: error: syntax error before ‘size_t’
/usr/include/string.h:96: error: syntax error before ‘size_t’
/usr/include/string.h:102: error: syntax error before ‘size_t’
/usr/include/string.h:109: error: syntax error before ‘strxfrm’
/usr/include/string.h:110: error: syntax error before ‘size_t’
/usr/include/string.h:124: error: syntax error before ‘strxfrm_l’
/usr/include/string.h:124: error: syntax error before ‘size_t’
/usr/include/string.h:138: error: syntax error before ‘size_t’
/usr/include/string.h:184: error: syntax error before ‘strcspn’
/usr/include/string.h:188: error: syntax error before ‘strspn’
/usr/include/string.h:225: error: syntax error before ‘size_t’
/usr/include/string.h:232: error: syntax error before ‘size_t’
/usr/include/string.h:235: error: syntax error before ‘size_t’
/usr/include/string.h:242: error: syntax error before ‘strlen’
/usr/include/string.h:249: error: syntax error before ‘strnlen’
/usr/include/string.h:249: error: syntax error before ‘size_t’
/usr/include/string.h:281: error: syntax error before ‘size_t’
/usr/include/string.h:288: error: syntax error before ‘size_t’
/usr/include/string.h:292: error: syntax error before ‘size_t’
/usr/include/string.h:296: error: syntax error before ‘size_t’
/usr/include/string.h:299: error: syntax error before ‘size_t’
/usr/include/string.h:329: error: syntax error before ‘size_t’
/usr/include/string.h:341: error: syntax error before ‘size_t’
/usr/include/string.h:370: error: syntax error before ‘size_t’
/usr/include/string.h:373: error: syntax error before ‘size_t’
/usr/include/string.h:380: error: syntax error before ‘size_t’
In file included from /usr/include/string.h:417,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:488,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/string2.h:969: error: syntax error before ‘__strcspn_c1’
/usr/include/bits/string2.h:971: error: syntax error before ‘__strcspn_c1’
/usr/include/bits/string2.h: In function ‘__strcspn_c1’:
/usr/include/bits/string2.h:973: error: syntax error before ‘__result’
/usr/include/bits/string2.h:974: error: ‘__result’ undeclared (first use in this function)
/usr/include/bits/string2.h: At top level:
/usr/include/bits/string2.h:979: error: syntax error before ‘__strcspn_c2’
/usr/include/bits/string2.h:982: error: syntax error before ‘__strcspn_c2’
/usr/include/bits/string2.h: In function ‘__strcspn_c2’:
/usr/include/bits/string2.h:984: error: syntax error before ‘__result’
/usr/include/bits/string2.h:985: error: ‘__result’ undeclared (first use in this function)
/usr/include/bits/string2.h: At top level:
/usr/include/bits/string2.h:991: error: syntax error before ‘__strcspn_c3’
/usr/include/bits/string2.h:994: error: syntax error before ‘__strcspn_c3’
/usr/include/bits/string2.h: In function ‘__strcspn_c3’:
/usr/include/bits/string2.h:997: error: syntax error before ‘__result’
/usr/include/bits/string2.h:998: error: ‘__result’ undeclared (first use in this function)
/usr/include/bits/string2.h: At top level:
/usr/include/bits/string2.h:1045: error: syntax error before ‘__strspn_c1’
/usr/include/bits/string2.h:1047: error: syntax error before ‘__strspn_c1’
/usr/include/bits/string2.h: In function ‘__strspn_c1’:
/usr/include/bits/string2.h:1049: error: syntax error before ‘__result’
/usr/include/bits/string2.h:1051: error: ‘__result’ undeclared (first use in this function)
/usr/include/bits/string2.h: At top level:
/usr/include/bits/string2.h:1056: error: syntax error before ‘__strspn_c2’
/usr/include/bits/string2.h:1059: error: syntax error before ‘__strspn_c2’
/usr/include/bits/string2.h: In function ‘__strspn_c2’:
/usr/include/bits/string2.h:1061: error: syntax error before ‘__result’
/usr/include/bits/string2.h:1063: error: ‘__result’ undeclared (first use in this function)
/usr/include/bits/string2.h: At top level:
/usr/include/bits/string2.h:1068: error: syntax error before ‘__strspn_c3’
/usr/include/bits/string2.h:1071: error: syntax error before ‘__strspn_c3’
/usr/include/bits/string2.h: In function ‘__strspn_c3’:
/usr/include/bits/string2.h:1073: error: syntax error before ‘__result’
/usr/include/bits/string2.h:1075: error: ‘__result’ undeclared (first use in this function)
/usr/include/bits/string2.h: In function ‘__strpbrk_c2’:
/usr/include/bits/string2.h:1129: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/string2.h:1129: error: syntax error before ‘__s’
/usr/include/bits/string2.h: In function ‘__strpbrk_c3’:
/usr/include/bits/string2.h:1142: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/string2.h:1142: error: syntax error before ‘__s’
/usr/include/bits/string2.h: At top level:
/usr/include/bits/string2.h:1323: error: syntax error before ‘size_t’
In file included from /usr/include/string.h:422,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:488,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/string3.h:49: error: syntax error before ‘size_t’
/usr/include/bits/string3.h: In function ‘__memcpy_ichk’:
/usr/include/bits/string3.h:51: error: ‘__dest’ undeclared (first use in this function)
/usr/include/bits/string3.h:51: error: ‘__src’ undeclared (first use in this function)
/usr/include/bits/string3.h:51: error: ‘__len’ undeclared (first use in this function)
/usr/include/bits/string3.h: At top level:
/usr/include/bits/string3.h:60: error: syntax error before ‘size_t’
/usr/include/bits/string3.h: In function ‘__memmove_ichk’:
/usr/include/bits/string3.h:62: error: ‘__dest’ undeclared (first use in this function)
/usr/include/bits/string3.h:62: error: ‘__src’ undeclared (first use in this function)
/usr/include/bits/string3.h:62: error: ‘__len’ undeclared (first use in this function)
/usr/include/bits/string3.h: At top level:
/usr/include/bits/string3.h:73: error: syntax error before ‘size_t’
/usr/include/bits/string3.h: In function ‘__mempcpy_ichk’:
/usr/include/bits/string3.h:75: error: ‘__dest’ undeclared (first use in this function)
/usr/include/bits/string3.h:75: error: ‘__src’ undeclared (first use in this function)
/usr/include/bits/string3.h:75: error: ‘__len’ undeclared (first use in this function)
/usr/include/bits/string3.h: At top level:
/usr/include/bits/string3.h:94: error: syntax error before ‘size_t’
/usr/include/bits/string3.h: In function ‘__memset_ichk’:
/usr/include/bits/string3.h:96: error: ‘__dest’ undeclared (first use in this function)
/usr/include/bits/string3.h:96: error: ‘__ch’ undeclared (first use in this function)
/usr/include/bits/string3.h:96: error: ‘__len’ undeclared (first use in this function)
/usr/include/bits/string3.h: At top level:
/usr/include/bits/string3.h:141: error: syntax error before ‘size_t’
/usr/include/bits/string3.h: In function ‘__strncpy_ichk’:
/usr/include/bits/string3.h:143: error: ‘__dest’ undeclared (first use in this function)
/usr/include/bits/string3.h:143: error: ‘__src’ undeclared (first use in this function)
/usr/include/bits/string3.h:143: error: ‘__len’ undeclared (first use in this function)
/usr/include/bits/string3.h: At top level:
/usr/include/bits/string3.h:164: error: syntax error before ‘size_t’
/usr/include/bits/string3.h: In function ‘__strncat_ichk’:
/usr/include/bits/string3.h:166: error: ‘__dest’ undeclared (first use in this function)
/usr/include/bits/string3.h:166: error: ‘__src’ undeclared (first use in this function)
/usr/include/bits/string3.h:166: error: ‘__len’ undeclared (first use in this function)
In file included from /usr/include/sys/uio.h:29,
from /usr/include/sys/socket.h:27,
from /usr/include/netinet/in.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:637,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/uio.h: At top level:
/usr/include/bits/uio.h:45: error: syntax error before ‘size_t’
In file included from /usr/include/sys/socket.h:35,
from /usr/include/netinet/in.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:637,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/socket.h:221: error: syntax error before ‘size_t’
/usr/include/bits/socket.h:224: error: syntax error before ‘msg_controllen’
/usr/include/bits/socket.h:227: error: syntax error before ‘}’ token
/usr/include/bits/socket.h:232: error: syntax error before ‘size_t’
/usr/include/bits/socket.h:239: error: syntax error before ‘}’ token
/usr/include/bits/socket.h: In function ‘__cmsg_nxthdr’:
/usr/include/bits/socket.h:266: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/socket.h:266: error: syntax error before ‘__cmsg’
/usr/include/bits/socket.h:271: error: dereferencing pointer to incomplete type
/usr/include/bits/socket.h:271: error: syntax error before ‘~’ token
/usr/include/bits/socket.h:271: error: syntax error before ‘)’ token
/usr/include/bits/socket.h:272: error: invalid use of undefined type ‘struct cmsghdr’
/usr/include/bits/socket.h:272: error: dereferencing pointer to incomplete type
/usr/include/bits/socket.h:273: error: dereferencing pointer to incomplete type
/usr/include/bits/socket.h:274: error: dereferencing pointer to incomplete type
/usr/include/bits/socket.h:274: error: syntax error before ‘~’ token
/usr/include/bits/socket.h:275: error: syntax error before ‘>’ token
In file included from /usr/include/netinet/in.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:637,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/sys/socket.h: At top level:
/usr/include/sys/socket.h:136: error: syntax error before ‘size_t’
/usr/include/sys/socket.h:143: error: syntax error before ‘size_t’
/usr/include/sys/socket.h:150: error: syntax error before ‘size_t’
/usr/include/sys/socket.h:161: error: syntax error before ‘size_t’
In file included from /usr/include/sys/socket.h:237,
from /usr/include/netinet/in.h:24,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:637,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/socket2.h:25: error: syntax error before ‘size_t’
/usr/include/bits/socket2.h:29: error: syntax error before ‘size_t’
/usr/include/bits/socket2.h: In function ‘recv’:
/usr/include/bits/socket2.h:31: error: ‘__buf’ undeclared (first use in this function)
/usr/include/bits/socket2.h:31: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/socket2.h:31: error: ‘__n’ undeclared (first use in this function)
/usr/include/bits/socket2.h:33: error: ‘__fd’ undeclared (first use in this function)
/usr/include/bits/socket2.h:33: error: ‘__flags’ undeclared (first use in this function)
/usr/include/bits/socket2.h: At top level:
/usr/include/bits/socket2.h:36: error: syntax error before ‘size_t’
/usr/include/bits/socket2.h:42: error: syntax error before ‘size_t’
/usr/include/bits/socket2.h: In function ‘recvfrom’:
/usr/include/bits/socket2.h:45: error: ‘__buf’ undeclared (first use in this function)
/usr/include/bits/socket2.h:45: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/socket2.h:45: error: ‘__n’ undeclared (first use in this function)
/usr/include/bits/socket2.h:47: error: ‘__fd’ undeclared (first use in this function)
/usr/include/bits/socket2.h:47: error: ‘__flags’ undeclared (first use in this function)
/usr/include/bits/socket2.h:47: error: ‘__addr’ undeclared (first use in this function)
/usr/include/bits/socket2.h:47: error: ‘__addr_len’ undeclared (first use in this function)
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:641,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/arpa/inet.h: At top level:
/usr/include/arpa/inet.h:78: error: syntax error before ‘size_t’
/usr/include/arpa/inet.h:84: error: syntax error before ‘size_t’
/usr/include/arpa/inet.h:90: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:673,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/time.h:197: error: syntax error before ‘strftime’
/usr/include/time.h:197: error: syntax error before ‘size_t’
/usr/include/time.h:215: error: syntax error before ‘strftime_l’
/usr/include/time.h:215: error: syntax error before ‘size_t’
In file included from /usr/include/netdb.h:33,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:736,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/rpc/netdb.h:61: error: syntax error before ‘size_t’
/usr/include/rpc/netdb.h:65: error: syntax error before ‘size_t’
/usr/include/rpc/netdb.h:69: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:736,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/netdb.h:162: error: syntax error before ‘size_t’
/usr/include/netdb.h:169: error: syntax error before ‘size_t’
/usr/include/netdb.h:175: error: syntax error before ‘size_t’
/usr/include/netdb.h:181: error: syntax error before ‘size_t’
/usr/include/netdb.h:232: error: syntax error before ‘size_t’
/usr/include/netdb.h:238: error: syntax error before ‘size_t’
/usr/include/netdb.h:244: error: syntax error before ‘size_t’
/usr/include/netdb.h:304: error: syntax error before ‘size_t’
/usr/include/netdb.h:310: error: syntax error before ‘size_t’
/usr/include/netdb.h:315: error: syntax error before ‘size_t’
/usr/include/netdb.h:370: error: syntax error before ‘size_t’
/usr/include/netdb.h:375: error: syntax error before ‘size_t’
/usr/include/netdb.h:380: error: syntax error before ‘size_t’
/usr/include/netdb.h:430: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:867,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/dirent.h:322: error: syntax error before ‘size_t’
/usr/include/dirent.h:334: error: syntax error before ‘size_t’
In file included from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:1751: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:1751: warning: data definition has no type or storage class
In file included from /usr/include/signal.h:348,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/unixish.h:106,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:1970,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/sigstack.h:54: error: syntax error before ‘size_t’
In file included from /usr/include/signal.h:351,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/unixish.h:106,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:1970,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/sys/ucontext.h:123: error: syntax error before ‘stack_t’
/usr/include/sys/ucontext.h:127: error: syntax error before ‘}’ token
In file included from /usr/include/pthread.h:23,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2072,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/sched.h:76: error: syntax error before ‘size_t’
/usr/include/sched.h:80: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2072,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/pthread.h:264: error: syntax error before ‘size_t’
/usr/include/pthread.h:268: error: syntax error before ‘size_t’
/usr/include/pthread.h:324: error: syntax error before ‘size_t’
/usr/include/pthread.h:331: error: syntax error before ‘size_t’
/usr/include/pthread.h:337: error: syntax error before ‘size_t’
/usr/include/pthread.h:343: error: syntax error before ‘size_t’
/usr/include/pthread.h:350: error: syntax error before ‘size_t’
/usr/include/pthread.h:356: error: syntax error before ‘size_t’
/usr/include/pthread.h:404: error: syntax error before ‘size_t’
/usr/include/pthread.h:408: error: syntax error before ‘size_t’
In file included from /usr/include/_G_config.h:44,
from /usr/include/libio.h:32,
from /usr/include/stdio.h:72,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h:65,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2324,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/gconv.h:72: error: syntax error before ‘size_t’
/usr/include/gconv.h:88: error: syntax error before ‘size_t’
/usr/include/gconv.h:97: error: syntax error before ‘size_t’
/usr/include/gconv.h:174: error: syntax error before ‘size_t’
/usr/include/gconv.h:177: error: syntax error before ‘}’ token
In file included from /usr/include/libio.h:32,
from /usr/include/stdio.h:72,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h:65,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2324,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/_G_config.h:47: error: field ‘__cd’ has incomplete type
/usr/include/_G_config.h:50: error: field ‘__cd’ has incomplete type
In file included from /usr/include/stdio.h:72,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h:65,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2324,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/libio.h:354: error: syntax error before ‘size_t’
/usr/include/libio.h:363: error: syntax error before ‘size_t’
/usr/include/libio.h:479: error: syntax error before ‘_IO_sgetn’
/usr/include/libio.h:479: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h:65,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2324,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/stdio.h:286: error: syntax error before ‘size_t’
/usr/include/stdio.h:292: error: syntax error before ‘size_t’
/usr/include/stdio.h:304: error: syntax error before ‘size_t’
/usr/include/stdio.h:311: error: syntax error before ‘size_t’
/usr/include/stdio.h:353: error: syntax error before ‘size_t’
/usr/include/stdio.h:357: error: syntax error before ‘size_t’
/usr/include/stdio.h:563: error: syntax error before ‘size_t’
/usr/include/stdio.h:566: error: syntax error before ‘size_t’
/usr/include/stdio.h:576: error: syntax error before ‘size_t’
/usr/include/stdio.h:606: error: syntax error before ‘fread’
/usr/include/stdio.h:606: error: syntax error before ‘size_t’
/usr/include/stdio.h:612: error: syntax error before ‘fwrite’
/usr/include/stdio.h:612: error: syntax error before ‘size_t’
/usr/include/stdio.h:634: error: syntax error before ‘fread_unlocked’
/usr/include/stdio.h:634: error: syntax error before ‘size_t’
/usr/include/stdio.h:636: error: syntax error before ‘fwrite_unlocked’
/usr/include/stdio.h:636: error: syntax error before ‘size_t’
In file included from /usr/include/stdio.h:831,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h:65,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2324,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/stdio.h:102: error: syntax error before ‘size_t’
/usr/include/bits/stdio.h: In function ‘getline’:
/usr/include/bits/stdio.h:104: error: ‘__lineptr’ undeclared (first use in this function)
/usr/include/bits/stdio.h:104: error: ‘__n’ undeclared (first use in this function)
/usr/include/bits/stdio.h:104: error: ‘__stream’ undeclared (first use in this function)
In file included from /usr/include/stdio.h:834,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h:65,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2324,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/stdio2.h: At top level:
/usr/include/bits/stdio2.h:24: error: syntax error before ‘size_t’
/usr/include/bits/stdio2.h:26: error: syntax error before ‘size_t’
/usr/include/bits/stdio2.h:38: error: syntax error before ‘size_t’
/usr/include/bits/stdio2.h:41: error: syntax error before ‘size_t’
/usr/include/bits/stdio2.h:86: error: syntax error before ‘size_t’
/usr/include/bits/stdio2.h: In function ‘gets’:
/usr/include/bits/stdio2.h:92: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/stdio2.h: In function ‘fgets’:
/usr/include/bits/stdio2.h:105: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/stdio2.h:105: error: syntax error before ‘__n’
/usr/include/bits/stdio2.h: In function ‘fgets_unlocked’:
/usr/include/bits/stdio2.h:118: error: ‘size_t’ undeclared (first use in this function)
/usr/include/bits/stdio2.h:118: error: syntax error before ‘__n’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/iperlsys.h:51,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2324,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h: At top level:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlio.h:106: error: syntax error before ‘STRLEN’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2338,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:250: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:250: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:251: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:256: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:256: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:257: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:259: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:263: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:263: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:264: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:266: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:270: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:270: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:271: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:274: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:279: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:279: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:280: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:285: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:289: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:289: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:290: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:296: error: syntax error before ‘xlv_targoff’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:296: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:297: error: syntax error before ‘xlv_targlen’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:297: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:301: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:305: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:305: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:306: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:314: error: syntax error before ‘xgv_namelen’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:314: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:317: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:321: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:321: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:322: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:331: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:339: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:339: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:340: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:365: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:369: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:369: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:370: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/sv.h:404: error: syntax error before ‘}’ token
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2343,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/cv.h:16: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/cv.h:16: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/cv.h:17: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/cv.h:41: error: syntax error before ‘}’ token
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:71,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/op.h:491,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2345,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/pwd.h:141: error: syntax error before ‘size_t’
/usr/include/pwd.h:147: error: syntax error before ‘size_t’
/usr/include/pwd.h:152: error: syntax error before ‘size_t’
/usr/include/pwd.h:166: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:74,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/op.h:491,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2345,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/grp.h:134: error: syntax error before ‘size_t’
/usr/include/grp.h:143: error: syntax error before ‘size_t’
/usr/include/grp.h:152: error: syntax error before ‘size_t’
/usr/include/grp.h:165: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:74,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/op.h:491,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2345,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/grp.h:178: error: syntax error before ‘__n’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:89,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/op.h:491,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2345,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/shadow.h:122: error: syntax error before ‘size_t’
/usr/include/shadow.h:125: error: syntax error before ‘size_t’
/usr/include/shadow.h:129: error: syntax error before ‘size_t’
/usr/include/shadow.h:133: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/op.h:491,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2345,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:605: error: syntax error before ‘size_t’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:605: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:616: error: syntax error before ‘_ctime_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:616: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:625: error: syntax error before ‘_grent_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:625: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:639: error: syntax error before ‘_hostent_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:639: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:650: error: syntax error before ‘_getlogin_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:650: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:658: error: syntax error before ‘_netent_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:658: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:673: error: syntax error before ‘_protoent_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:673: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:685: error: syntax error before ‘_pwent_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:685: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:699: error: syntax error before ‘_servent_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:699: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:711: error: syntax error before ‘_spent_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:711: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:732: error: syntax error before ‘_readdir_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:732: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:739: error: syntax error before ‘_readdir64_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:739: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:750: error: syntax error before ‘_strerror_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:750: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:754: error: syntax error before ‘_ttyname_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:754: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:779: error: syntax error before ‘}’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/reentr.h:779: warning: data definition has no type or storage class
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:2348,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/hv.h:36: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/hv.h:36: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/hv.h:37: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/hv.h:48: error: syntax error before ‘}’ token
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:3479,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:81: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:81: warning: no semicolon at end of struct or union
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:165: error: syntax error before ‘Tefloatsize’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:165: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:221: error: syntax error before ‘Treg_oldsavedlen’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:221: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:225: error: syntax error before ‘Treg_poscache_size’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:225: warning: data definition has no type or storage class
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:3481,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:365: error: syntax error before ‘Icollxfrm_base’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:365: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:366: error: syntax error before ‘Icollxfrm_mult’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:366: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:404: error: syntax error before ‘Ilast_swash_slen’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:404: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:497: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:497: warning: data definition has no type or storage class
In file included from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:3487: error: syntax error before ‘}’ token
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:3557,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:37: error: syntax error before ‘nbytes’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:38: error: syntax error before ‘elements’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:39: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:3557,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:59: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:164: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:241: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:247: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:248: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:255: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:293: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:312: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:313: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:314: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:315: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:330: error: syntax error before ‘Perl_is_utf8_char’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:330: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:331: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:332: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:363: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:364: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:365: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:367: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:425: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:431: error: syntax error before ‘size_t’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:514: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:520: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:521: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:664: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:665: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:667: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:687: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:688: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:689: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:694: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:695: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:696: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:714: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:725: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:727: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:730: error: syntax error before ‘Perl_sv_len’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:730: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:731: error: syntax error before ‘Perl_sv_len_utf8’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:731: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:741: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:742: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:760: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:762: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:771: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:772: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:773: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:779: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:780: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:781: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:782: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:783: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:797: error: syntax error before ‘Perl_utf8_length’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:797: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:800: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:801: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:802: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:803: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:804: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:805: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:806: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:811: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:812: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:841: error: syntax error before ‘nbytes’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:842: error: syntax error before ‘elements’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:843: error: syntax error before ‘size_t’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:857: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:867: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:869: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:871: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:878: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:881: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1285: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1287: error: syntax error before ‘Perl_sv_utf8_upgrade_flags’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1287: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1288: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1289: error: syntax error before ‘STRLEN’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1305: error: syntax error before ‘size_t’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1306: error: syntax error before ‘size_t’
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/proto.h:1307: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:4113,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/sys/sem.h:59: error: syntax error before ‘size_t’
/usr/include/sys/sem.h:63: error: syntax error before ‘size_t’
In file included from /usr/include/fcntl.h:33,
from /usr/include/sys/file.h:25,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perl.h:4238,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:4:
/usr/include/bits/fcntl.h:186: error: syntax error before ‘size_t’
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlapi.h:35,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/XSUB.h:320,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:5:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:81: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:81: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:165: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:165: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:221: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:221: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:225: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/thrdvar.h:225: warning: data definition has no type or storage class
In file included from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/perlapi.h:36,
from /usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/XSUB.h:320,
from /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:5:
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:365: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:365: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:366: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:366: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:404: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:404: warning: data definition has no type or storage class
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:497: error: syntax error before ‘*’ token
/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE/intrpvar.h:497: warning: data definition has no type or storage class
/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs: In function ‘boot_Foo__Bar’:
/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:73: error: ‘pswd’ undeclared (first use in this function)
/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:73: error: ‘pswd_z’ undeclared (first use in this function)
/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:74: error: ‘text’ undeclared (first use in this function)
/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.xs:74: error: ‘text_z’ undeclared (first use in this function)
error building /home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.o from '/home/njh/.cpanplus/5.8.6/build/Module-Crypt-0.04/t/output/tmp.PRBiERa4C/Foo/Bar.c' at /home/njh/.cpanplus/5.8.6/build/ExtUtils-CBuilder-0.15/blib/lib/ExtUtils/CBuilder/Base.pm line 108.
FAILED tests 2-4
Failed 3/4 tests, 25.00% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/01-basic.t 4 3 75.00% 2-4
Failed 1/1 test scripts, 0.00% okay. 3/4 subtests failed, 25.00% okay.
make: *** [test_dynamic] Error 255
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Carp 1.03
ExtUtils::CBuilder 0
ExtUtils::Mkbootstrap 1.15
ExtUtils::ParseXS 0
File::Find 1.07
File::Path 1.06
File::Spec 3.09
File::Temp 0.14
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
Platform:
osname=linux, osvers=2.4.21-27.0.2.elsmp, archname=i386-linux-thread-multi
uname='linux decompose.build.redhat.com 2.4.21-27.0.2.elsmp #1 smp wed jan 12 23:35:44 est 2005 i686 i686 i386 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -Dversion=5.8.6 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_endprotoent_r_proto -Ud_endservent_r_proto -Ud_sethostent_r_proto -Ud_setprotoent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.5 5.8.4 5.8.3'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
ccversion='', gccversion='4.0.0 20050516 (Red Hat 4.0.0-6)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.5'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE'
cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Next