FAIL Module-Crypt-0.04 i386-linux-thread-multi 2.6.3-25mdk-i686-up-4gb

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear Alessandro Ranellucci,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[CP_MSG] [Fri Oct 14 00:09:24 2005] Trying to get 'file://usr/local/cpan/authors/id/A/AA/AAR/Module-Crypt-0.04.tar.gz'
[CP_MSG] [Fri Oct 14 00:09:24 2005] Trying to get 'file://usr/local/cpan/authors/id/A/AA/AAR/CHECKSUMS'
[CP_MSG] [Fri Oct 14 00:09:24 2005] Checksum matches for 'Module-Crypt-0.04.tar.gz'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/Changelog'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/Crypt.pm'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/Crypt.xs'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/Makefile.PL'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/MANIFEST'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/META.yml'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/README'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/t/'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module-Crypt-0.04/t/01-basic.t'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Extracted 'Module::Crypt' to '/home/cpanplus/.cpanplus/5.8.5/build/Module-Crypt-0.04'
[CP_MSG] [Fri Oct 14 00:09:25 2005] Checking if your kit is complete...
Looks good
Writing Makefile for Module::Crypt

[CP_MSG] [Fri Oct 14 00:09:27 2005] cp Crypt.pm blib/lib/Module/Crypt.pm
/usr/bin/perl5.8.5 /usr/lib/perl5/5.8.5/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.8.5/ExtUtils/typemap  Crypt.xs > Crypt.xsc && mv Crypt.xsc Crypt.c
gcc -c   -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro   -DVERSION=\"0.04\" -DXS_VERSION=\"0.04\" -fPIC "-I/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE"   Crypt.c
Running Mkbootstrap for Module::Crypt ()
chmod 644 Crypt.bs
rm -f blib/arch/auto/Module/Crypt/Crypt.so
gcc  -shared -L/usr/local/lib Crypt.o  -o blib/arch/auto/Module/Crypt/Crypt.so 	\
     	\
  
chmod 755 blib/arch/auto/Module/Crypt/Crypt.so
cp Crypt.bs blib/arch/auto/Module/Crypt/Crypt.bs
chmod 644 blib/arch/auto/Module/Crypt/Crypt.bs
Manifying blib/man3/Module::Crypt.3pm

[CP_ERROR] [Fri Oct 14 00:09:27 2005] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl5.8.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-basic....# Failed test 3 in t/01-basic.t at line 45
#  t/01-basic.t line 45 is: ok eval "use Foo::Bar; 1";
Undefined subroutine &Foo::Bar::multiply called at t/01-basic.t line 46, <File0000> line 108.
FAILED tests 3-4
	Failed 2/4 tests, 50.00% okay
Failed Test  Stat Wstat Total Fail  Failed  List of Failed
---------------------------------------------------------------------------------------------------
t/01-basic.t                4    2  50.00%  3-4
Failed 1/1 test scripts, 0.00% okay. 2/4 subtests failed, 50.00% okay.
make: *** [test_dynamic] Erreur 255


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Carp                               1.03
	ExtUtils::CBuilder                 0.13
	ExtUtils::Mkbootstrap              1.15
	ExtUtils::ParseXS                  2.12
	File::Find                         1.07
	File::Path                         1.06
	File::Spec                         3.11
	File::Temp                         0.16

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

--

Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
  Platform:
    osname=linux, osvers=2.6.3-25mdk-i686-up-4gb, archname=i386-linux-thread-multi
    uname='linux mercury.mandriva.com 2.6.3-25mdk-i686-up-4gb #1 fri jan 14 03:39:39 mst 2005 i686 intel(r) pentium(r) 4 cpu 3.00ghz unknown gnulinux '
    config_args='-des -Dinc_version_list=5.8.4/i386-linux-thread-multi 5.8.4 5.8.3/i386-linux-thread-multi 5.8.3 5.8.2/i386-linux-thread-multi 5.8.2 5.8.1/i386-linux-thread-multi 5.8.1 5.8.0/i386-linux-thread-multi 5.8.0 5.6.1 5.6.0 -Darchname=i386-linux -Dcc=gcc -Doptimize=-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro  -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr -Dman3ext=3pm -Dcf_by=Mandrakesoft -Dmyhostname=localhost -Dperladmin=root@localhost -Dd_dosuid -Ud_csh -Duseshrplib -Accflags=-DPERL_DISABLE_PMC -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro ',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lndbm -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.3'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Module-Crypt-0.04 i386-linux-thread-multi 2.6.3-25mdk-i686-up-4gb by saper