FAIL Test-Benchmark-0.004 i386-linux-thread-multi 2.4.21-25.elsmp

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear FDALY,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[CP_MSG] [Thu Oct 13 11:52:47 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/F/FD/FDALY/Test-Benchmark-0.004.tar.gz'
[CP_MSG] [Thu Oct 13 11:52:47 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/F/FD/FDALY/CHECKSUMS'
[CP_MSG] [Thu Oct 13 11:52:47 2005] Checksum matches for 'Test-Benchmark-0.004.tar.gz'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/Makefile.PL'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/LGPL'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/META.yml'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/t/'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/t/test.t'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/CHANGES'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/README'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/lib/'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/lib/Test/'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/lib/Test/Benchmark.pm'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test-Benchmark-0.004/MANIFEST'
[CP_MSG] [Thu Oct 13 11:52:48 2005] Extracted 'Test::Benchmark' to '/root/.cpanplus/5.8.5/build/Test-Benchmark-0.004'
[CP_MSG] [Thu Oct 13 11:52:54 2005] Checking if your kit is complete...
Looks good
Writing Makefile for Test::Benchmark

[CP_MSG] [Thu Oct 13 11:52:54 2005] Module 'Test::Benchmark' requires 'Test::NoWarnings' version '0' to be installed 
[CP_MSG] [Thu Oct 13 11:52:54 2005] Module 'Test::Benchmark' requires 'Test::Tester' version '0.103' to be installed 
[CP_MSG] [Thu Oct 13 11:53:14 2005] cp lib/Test/Benchmark.pm blib/lib/Test/Benchmark.pm
Manifying blib/man3/Test::Benchmark.3pm

[CP_ERROR] [Thu Oct 13 11:53:45 2005] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/test....# Looks like you planned 36 tests but only ran 29.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 30-36
	Failed 7/36 tests, 80.56% okay
Failed Test Stat Wstat Total Fail  Failed  List of Failed
-------------------------------------------------------------------------------
t/test.t     255 65280    36   14  38.89%  30-36
Failed 1/1 test scripts, 0.00% okay. 7/36 subtests failed, 80.56% okay.
make: *** [test_dynamic] Error 255


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Benchmark                          1.06
	Test::Builder                      0.31
	Test::NoWarnings                      0
	Test::Tester                          0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
  Platform:
    osname=linux, osvers=2.4.21-25.elsmp, archname=i386-linux-thread-multi
    uname='linux porky.build.redhat.com 2.4.21-25.elsmp #1 smp fri nov 12 21:34:51 est 2004 i686 i686 i386 gnulinux '
    config_args='-des -Doptimize=-O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -Dversion=5.8.5 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 5.8.1 5.8.0'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2 -g -pipe -m32 -march=i386 -mtune=pentium4',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='3.4.3 20050227 (Red Hat 3.4.3-22)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Test-Benchmark-0.004 i386-linux-thread-multi 2.4.21-25.elsmp by njh